My 2019 Forest River travel trailer developed a crack in the frame where the axle bracket is welded…read moreto the frame. I spent several months going through inspections with their authorized service center and had to wait while Forest River and the frame manufacturer developed a repair plan. In the end, the service center was unable to do the repair and my alternatives were to either drive my trailer to their plant in Indiana or find a local welder. Jeff at Furrion has great reviews and a friend also recommended him. He developed a plan similar to Forest Rivers' and repaired the cracks (he found a crack starting on the opposite axle weld as well) and welded 30 x 4-1/2 inch 1/4 inch plates on both sides of the frame, as well as some 2 x 2 angle iron to reinforce the frame both in front of and behind the axle welds. I am extremely happy with the results of the repair and will not hesitate to have Jeff do any future repairs or fabrication I might need. Forest River has also stepped up and agreed to reimburse me the cost of the repair as it met their plan specifications. I would add that another RV repair shop that does perform welding services refused to even attempt this job. Thanks again Jeff!

This review is strictly for the communication I had with Jeff based on my inquiry through Yelp…read moreabout getting some metal work done. Although Jeff didn't have the capability of doing the work I'd requested, his responses were very prompt, friendly, thorough, and VERY helpful! Jeff was able to give me some suggestions for places to check with, and I'd never have thought of doing that were it nor for his suggestion. If you need any metal work done, I'd recommend checking with Furion Fabrication.

They were very nice, however the additional reviews should specify that "open to small jobs" still…read morerequires a minimum spend. Unfortunate that I am not able to find a professional welder to help with a small job in the city of reuse, recycle, and repurpose. Back to the drawing board I go.

I had a very small job which I was worried about finding someone to help me remedy…read more I made a blind call to this organization and was greeted with a very gracious invite to bring the piece over and they would see what they would do. Upon arrival the Joe, the wonderful lady I spoke with on the phone, came out to meet me and introduced me to their foreman who took the work and did, what I asked, in about 20 minutes, wow. I did not estimate that there was more that needed to be adjusted and had to take it back and again they did the work. I can't tell you how nice it is to have people who are willing to help the locals. Fan forever.

FLO FAB EXTREMELY Accommodating, really great customer service! IF YOU HAVE A PROJECT OR ANY WORK…read moreWELDED Dustin is A PRO! He is also a lifesaver. He didn't charge me full price knowing i had gotten ripped off somewhere else, FAB Flo helped me out on a Friday afterhours with just a phone message, he contacted me within 5 min! Then agreed to do it that day... A friday night. He completed the project in a very very short time! It was done very well this time by Fo Fab! after having been done by another welder and paid for a very crappy job, it turned out crooked not even square. So Flo Fab really came through. AND did it for a reasonable price even though it could have cost me in the hundreds somewhere else!

Dustin did a great job for me. Contacted for mobile welding to repair a gate on my property. Came…read moreout and provided recommendations to solve my issues and quickly performed the repairs flawlessly. I would recommend!

These folks are great to work with! Very responsive and communicative, and their work is top-notch…read moreand reasonably priced. I've had them cut aeration/drainage holes in stainless steel barrels I use as pest-proof composting bins, and they now work splendidly.

Elemental was able to make a beautiful arch for my wife and my wedding. We now have it as an…read morearchway in our backyard that we plan to keep forever. The design, both aesthetically and practically, were phenomenal and we are so grateful for the work.

I had some automotive parts powder coated, and everything turned out better than expected. They are…read morevery professional and do excellent work.

I worked with Parks on powder coating a couple sand rail cages for my UTV's. Parks worked with me…read moreon selecting the product that would best suite my needs. The color I chose was in stock and after dropping the cages off I was contacted the next day to inform me they were done. I have to say they turned out better then I hoped. And if you knew me that's saying a lot. To sum it up Parks did a superior job at a very good price and the delivery was fantastic. Thanks Guys. Russ

Ryan did a great job on a welding project I had. He bid the job and time it would take and came…read morethrough. Great work ethic. You definitely should use him for your next project.

From the owner: We provide quality products at affordable prices while earning trust and building relationshipread more

I needed some welding done. Not a lot of welding, just a few inches, but involving dissimilar…read moremetals and some tired old work (repair on repair) as well. Madden and his guys understood exactly what I was trying to achieve, (restoring an abused metal sculpture by a recognized local artist), out performed my request and followed up to see that it all went well. That's customer service. My job wasn't a money maker for them, in fact, it likely cost them to do it, but they took it on and I am absolutely delighted they did.

I needed a garden tool made and found Madden Fabrication online. They had such a high rating, so I…read moredecided to choose them. I worked with the shop foreman, Ethan Soelberg and he was very helpful and did a wonderful job. He also suggested some design changes that were very helpful and it was completed by the next day. Heather, who is in the office was also very friendly and professional. They are a local, family owned business and I would highly recommend them if you are in need of metal fabrication. Thanks again to Madden Fabrication! Linda M.

Willy is awesome! I was wanting a firewood holder and a few arbors for my backyard. I gave him an…read moreidea of what I was wanting. He drew up some plans plans and they were perfect for what I was wanting. The finished products are great, I am very pleased with the work he did.

Willy has done multiple projects for our company. He does a great job and has an innovative mind…read more I highly recommend him.

Our deck was nearing the end of its life. We sought out multiple deck contractors and just about…read moreevery one of them said it was unsalvageable and that we should replace it. However, replacing the deck would mean having to update it to current building codes and permits, which would then mean having to hire an engineer for our small 6' x 14' deck... Bruce came over, took a look and casually said, we can add more supports and fix the deck instead of having to replace it. He walked us through all the repairs he would do, he listened to our concerns and wrote up an estimate that weekend. I choose to hire him because of his straightforwardness in answering all my questions, he was so down to earth and friendly, I felt like he was trustworthy. We went from potentially having to wait months and spend $20,000 on a new replacement deck to spending about $5,000 on repairs and taking considerably less time. They were booked out till about October and would contact us when the time came closer, they did just that and were able to fix the deck in a day. We hired him to come back to build a 2nd retaining wall, his son came out and built it in less than an hour. They used high quality materials, I feel like the wood used will last a long time. A year later, we noticed that the deck was starting to sink and consulted with Bruce. He came over, took a look and figured it was probably the ground material was soft and causing the deck to sink. He offered to fix it, FREE OF CHARGE. It wasn't his fault the ground was soft, it just shows how much integrity he has in his work. Hands down, I would recommend him to anyone. My neighbor immediately asked for his contact!

I used Shaffer & Sons to replace a gate two years ago. Knotty boards were used, and they took the…read morenice lock that was on my old gate and replaced it with a shoddy one. They also left concrete debris from removing an old post in my raised bed. They were the cheapest bid ($950), but I now have a gate with holes that I will need to replace in a few years. Wouldn't recommend.