Good group of people. Honest. Had a problem and they explained and sorted out without issues…read more End product looked excellent!

Had a couple Jeep CJ7 doors plastic media blasted. They did an excellent job in cleaning them…read morewell. Plastic media blasting is what I had done. Only method out there that won't damage metal or open it up to rust because it's non-abrasive unlike sand or soda blasting that will cause rust! They also have very fine sand to remove rust if needed. Done correctly as they do it won't warp the metal.

amazing quality work! We had a fair amount of damage to an antique table and chairs as well as…read moredamage to hardware floors and a banister. Everything looks as good as new great quality craftsmanship.

This guy somehow made a table wrecked by nail polish remover look perfect. It's more expensive than…read moreyou would think, but the value is there. Magic.

Great service at a very fair price! I had a pair of grills for my door windows sandblasted and…read morepowder coated. Great job and very friendly people to work with. Extremely pleased with the product and the price!

We asked 3 different companies for quotes to do some foundation work and encapsulate the…read morecrawlspace, and got wildly different prices for both jobs. I definitely recommend getting multiple quotes and asking as many questions as you can about what is what is not included, no matter what. While we went with a different company for the foundation work, DocAir gave a great quote and scope of work for the encapsulation. In the end, we didn't do their recommended "storm water management", as we had only minor water intrusion from the outside, but a lot of water coming from condensation on the air vents from the incredibly high humidity in the crawlspace (over 90% humidity constantly during the summer), which was also soaking and warping the wood support beams and floor joists and getting behind the insulation. We did: 1) fungus remediation, which included the tedious and hard work of removing a huge amount of dirty and wet insulation under the floorboards, 2) trenching the edges of the crawlspace and installing drain pipes and a sump pump, and 3) encapsulation with dehumidifier (drains into the sump pump), which also included sealing points of entry like pipes and external vents. Note that the other quotes were more expensive and did not even include removing insulation or treating fungus (companies often expect you to hire someone else to do that before they start work). To set expectations, they are quite busy so be patient. It took about a month to get scheduled and another month for them to come out and do the work. A two-man team (Joselino and Orlando) did all the work over 3 days, and they were professional, polite, thorough, and did incredibly high quality work. I had the plumbing inspected before they came to ensure no pipes would leak into the encapsulated space, but they still found a leaky coupling and replaced it! DocAir supplies a remote temperature and humidity meter as well so you can continually compare the house to the crawlspace (you can check the outside weather report for another comparison). It's winter now, but we've recently had a few very rainy days with humidity reaching up to 94% outside. The crawlspace humidity has steadily decreased from 55% immediately after installation to 45% (very good!), and the house/crawlspace temperatures have been within about 5 degrees of each other. This suggests that the crawlspace is effectively insulated from outside temperature and humidity. Also, you can optionally have them come inspect the system every 6 months (for $60 a visit) to ensure everything is still working correctly, change the dehumidifier filter, etc. I plan to do this to make sure everything is still working well with the combined effects of humidity and my AC vents!

The DocAir team members are professionals in what they do…read more You can count on them to deliver what they promise. Their prices are very reasonable compared to the quality they deliver. I strongly recommend them.

I had foam in sofa cushions replace. Amy and Brittany were very nice and helpful. They wanted to…read moremake sure I was happy with what I was getting. I was so impressed with the job they did, I brought in a new Lazy Boy recliner that had shit padding in it. Zach and Brittany were very thorough in making a plan, they had me try out foam. Jeff said that they want everyone's butt to be happy. When I picked up, I got to meet the man that did the work and they put the chair in my vehicle. Really nice people that do great work. I love my new chair!

Needed an easy ottoman repair. They were able to repair on the spot, and comped the work since it…read morewas so quick. Very generous! I will definitely use again if in need of furniture upholstery or repair in the future.

These guys are awesome. Dropped off my aging Husqvarna LH 221 on Saturday, just before closing,…read moreand it was ready to pick up on Tuesday! They cleaned out the carburetor and got it running again. You can't complain about the service, either. No one in the store is above helping you load your mower into the car for you. I know where to take it if I run into any problems!

Nashville Lawn Equipment's personnel are truly customer service centric!…read more For any lawn equipment needs and/or services, start with Nashville Lawn Equipment first!

Jeff was so nice and he did a great job! I had area rugs -3…read moreof them and an oversized chair cleaned and they came out perfect. He was on time and did the job quickly and efficiently! I will use Jeff again!!

I asked for my air ducts and return registers to be cleaned. Jeff works alone, so you don't have to…read moreworry about multiple people working in different parts of your house. He did a great job--was very tidy--and finished right on time! I noticed the air was fresher, and, of all, the persistent musty smell was gone from the powder room, which we initially thought was a P-trap we had already serviced (by a plumber). I also had him clean my dryer vent, and he came back to clean a couple of fabric chairs, which looked great afterward. Best of all, his prices were fair and even a bit lower than those of other companies. Use any or all of his services, and you will be completely satisfied!

Blake in the machine repair area in the back of Ace Hardware (highway 100, Bellevue/Nashville, TN)…read moregave us amazing help this evening. We walked in with a broken knob for a pull-out shelf hoping to replace it. This kind of knob is very hard to find, but Blake kindly offered to repair it. He quickly fixed it and the knob is a perfect fit in our furniture again. Thank you, thank you, thank you, Blake and Ace Hardware.

I called the store and a real person answered the phone. Not only that, but he was knowledge and…read morehelpful for my question on getting a copy of my truck key copied. Will be back!