I have a turbo downpipe that needed my recirculated dump tube length adjusted and cutting my…read moredownpipe in half to add a 2.5" vband before the bends. I called the shop and spoke to Joey and explained what I needed. He gave me quote over the phone and I decided to stop by. When I arrived I showed him the parts explaining what I wanted to do. Joey said he could get it done by next morning and gave me a final price, which was within quoted price over the phone so I agreed. Joey completed the work as stated and I am overall happy with the work. Will be back when I need more fab and welding done for my projects! Do note that this was labor only and I provided all parts. Pics show before and after.

Where to begin, Our family purchased our first Pop up tent…read moretrailer, a huge step up from our typical camping tent. We were excited to bring it home but noticed we couldn't get it into our driveway. The bumper was to low on the driveway and was getting stuck on the cement. I called around to all the RV stores and for some reason they all recommended ABC Welding in Anaheim. Well here comes ABC Welding to our rescue. Chuck was the nicest guy, very personalable and extremely honest, he told me to replace my hitch to a lower type hitch and that might solve my problem. He could of made a quick dollar off of me but chose not to . I replaced the hitch a week later and it still got stuck on my driveway so he suggested we add caster wheels to the lower bumper to clear the driveway so I brought it back to him and he did an amazing job! A few weeks later I brought back my trailer for a hitch attachment since he did such a great job on my caster wheels. He just didnt do a hitch attachment but a work of art, literally! He changed the spare wheel attachment point directly on to the bumper to accommodate the extra steel to placed to reinforce the bumper. It went from a 30lb. Bumper rating to well over a thousand pound gorrilla rating. This new setup can probably haul another trailer or a boat, that's how strong he built it. Again it's a thing of beauty and structurely superior to other bumper setups I've seen. I can't give enough accilades about this gentlemans skills and business practice. To simply say it, Chuck is Great!

I contacted several welding services to look at my rusted yard gates, and most of them told me I…read morehad no choice but to replace them entirely. Ismael was the only one who gave me a straight answer, telling me they could be repaired, and provided a very reasonable quote. The team did an incredible job and really focused on the details, from the welding itself to cleaning up the gates afterward. I truly appreciate the quality of their work and their honesty. I highly recommend Mick Welding Inc for anyone looking for skilled and professional service!

Very friendly and flexible. Was able to help me without much prior notice and at a very fair price!read more

He was willing to do a small welding job for a broken chair. I brought the broken piece to him late…read morein the morning, and he had done it by early afternoon the same day. I would definitely recommend this place for any welding service. I wasn't sure if it was worth welding but his price was fair so I had nothing to lose.

I happened to find this wonderful welding shop quite by accident, but I am glad for the great…read moreresults the opportunity provided. Over the holiday, our stainless-steel sink rack broke in a few places, which made the rack less functional. I brought the broken sink rack to Bryan's shop to ask if it could be fixed. Though he was very busy with multiple job orders and phone calls, he made time to answer my questions, and assure me positively it could be repaired. I appreciate this greatly, as I was a "walk-in", without an appointment or a prior phone call; since I was going to "see" what was possible by showing the item, instead of trying to explain on a call. Bryan then said, "If you'd like to wait, I can work on it now." Wow. Did not expect such prompt service and direct action to my inquiry. Outstanding! Suffice to say, the sink rack was totally repaired, better than new, with a very happy spouse and home as a bonus. Bryan took additional time to have a short chat with me, and though I just met him, I feel as though he's the great supportive and helpful friend I've known for many years. Very honest. Great skills; he welded better than it was when new! Very fair, caring and exceptionally customer focused (though understand he is a very busy man, with multiple due-dates and other obligations, so keep this in mind.) If you need a welder, Bryan is the best!

A1 repaired my Moms iron gate, which was improperly installed, followed by 3 yes 3 prior attempts…read moreto resolve the perpetual ISSUE, our issue was the gate not aligning correctly to close. The installers put only one hinge with two screws. This large heavy gate needed far more support. Where others did not or could not figure out the best remedy, Norbert and Cecilia did! When the welder Norbert he explained each step of his plan and HIS PLAN IS BRILLIANT! We are AMAZED AND MOVING FORWARD WITH ANOTHER PROJECT, my Moms back fence.

After searching in the local area, I ended up using A1 Welding for my project and it turned out…read morevery good! It was a semi-complicated arrangement of 1x1 square tubing that formed a structure for our motion simulator. We were pleased with the outcome as well as the service and communication. It was also done in under the estimated time. I would highly recommend this company for any type of welding projects that fall in their scope of work!

Came in to ask about moving some fog light tabs on the other side of my bumper…read more Frank was very nice and welcoming. He listened to me about my project and quoted me a fair price. I also asked to straighten some bumper horns. Everything turned out great. He finished even before our spoken return time. Super happy with the outcome and work that was done.

All I can say is my expectations were not only met, they were far exceeded…read more 1. If you want an honest business, this is it. 2. If you want to support a family business, and not the big corporations, you've found the place. 3. If you want quality and care on your project, you get that here. 4. If you care about your hard earned money and want a fair price, it's here as well. And on top of all of this, they're personal and friendly. I highly recommend this business to anyone. 10 star business which all businesses should strive to be. Thank you so much! Vince and Stacy

Great and friendly staff. Price is reasonable too. The turn around took 2-3 days. I was amazed by…read moremy son's medal and how it turned out! They are also good with social media communication, my husband would inquire through text messages and emails and they were able to get back to him in a timely manner and answered every question he had.

AMAZING we had the best experience having a black kitchen pot rack turn to beautiful Nickel ! The…read moreservice was very friendly family run gave us in a timely manner I'm already taking off all my hardware in my new house everything Nicke.

Have used them in the past and although it came out higher than expected, they were transparent,…read morehonest and cordial. Fast forward to this instance where I have a batch of rotors that I needed to be turned down 1mm each side. Call him, describe what I'm needing and ask if he has a rough estimate on price. He asks me to text pictures, I jot down his number and then send him pictures shortly after. Gave him an hr or so and called him back to see if he received the pictures. Doesnt reallt acknowledge it and is pushy to have me bring them in and that he can do it. I'm about 25ish mins away, but he insists that he'll be late at the shop and that it's no problem. I bring in 1 rotor to see if he can still give me an estimate and he suggests he can help me bring in the rest of the rotors, about 10 in total. As we're bringing them in, I ask him again how much he's thinking it's going to be and he mentions $50 each. At this point, it's beyond the threshold in which the supplier was going to reimburse me for so I ask if I can just machine 2 rotors for now and figure out what can be done with the supplier. The next week rolls around and days go where I dont hear anything. I text him and no response for a day or 2. I call later the following week and he gives me a response like the rotors have been done and that he's been waiting on me. I ask him texting is the best method of communication since he originally asked me to text and he said text is good. I ask him if he's been receiving my texts in which he responds with affirmation. I go to pick up the rotors and come to find out that he only did a single rotor in which I ask when the other side would be done and he says in about 1-2 business days. I say that's fine and then mention that I'll leave that single rotor behind and grab the rest. He then mentions that if I in doing just 2 rotors, that the price would be $100 each. At this point, I'm no longer feeling like this is about money and get the impression that he's just a shady crook now trying to take advantage of people. I'm a little shocked at the pricing at this point and ended up just taking all the rotors back and paid him his $100 to machine a single rotor. Ended up having another shop do the for $20 each

Great work and quality customer service from start to finish. Everything you need from a business.read more

These folks are so great. I had an acrylic drawer that broke and they fixed it good as new. It was…read moreready the next day thank you guys.

Farrah is great to deal with we have been using them for a few years now for all of our custom…read moreprojects for our business and they have always come through in amazing quality as well as in the time it takes some to get the products ready.