Really incredible place to get access to any of a myriad of machines that the average person would…read moreotherwise have a hard time getting access to (laser cutters, CNC machines, 3D printers) - and the new ceramics studio is SIGNIFICANTLY cheaper than any of the surrounding studios in Seattle. The members and staff have been very friendly and welcoming - definitely recommend.

My brother paid $125 for a month membership so I could get some familiarity with 3D printing…read more Attended new member orientation on one of my days off. After that, no instructors were available to teach on a Thursday, Friday or Saturday. Uncertified members are not allowed to use 3D printers unsupervised. Certifications are only done on Sundays (one of my work days). Jeremy Hanson replied that for a $50 fee, an instructor could come in on one of my days off from work. On the last day of my work week, I had to isolate due to Covid Omicron. When my doctor cleared me to return to work, I followed up with Jeremy but got no response to either of 2 e-mails I sent. I also contacted contact@seattlemakers.org and got no response. I can't say I'd recommend this place to anyone.

Makerspace everywhere is amazing! But a 24-hour Makerspace! This is such an amazing resource for…read morethe community!

This is an amazingly well-equipped _nonprofit_ maker space. I drive all the way from Redmond to…read moremake stuff. Before I get into the stuff, I want to point out that the greatest strength of the place is that it's a community. I'm a regular member, and in awe at the work that the volunteers do to make it great for everyone. I try to do my part too. Most of the good stuff is for members only, but they also have regular classes that are open to non-members. Membership covers rent on the space, use and maintenance of equipment, and lots of basic supplies. It's well-equipped enough for advanced makers, and supportive and welcoming enough for newbies. Here's my descriptive tour: The space is in a building with businesses on the ground floor, and apartments above. The front door leads past some salons. The door to the space is on the left near the end of the hall. To get in, members use an RFID key; visitors are let in by a member or just walk in on open house days. There's a large multi-purpose room with big tables and lots of tools and supplies along the walls. The biggest tool in the room is a heavy duty sewing machine; I think it can stitch through leather. There's a door to a deck where members can do outdoor work. The front room opens into a lounge area with more tables and quite a few bookshelves full of books and board games. In the hall, there's a space for members' lockers. Just beyond that is the wood shop, which has all sorts of useful hand tools and power tools. There's a large CNC milling machine that I really want to learn how to use. There's a cool dust-removal system. About the only wood shop tool that I can think of that's absent is a lathe. There's a bathroom with a cool light fixture and the necessary facilities. Around a corner, there's a space for some typical office equipment. Opposite, the 3D printing room has enough filament 3D printers that I've never heard of all of them being busy or out of service at once. There's a resin 3D printer that builds layers through a high-resolution optical process, inside a booth that contains the fumes well enough that its weird smells are imperceptible through the rest of the space. There's a 3D scanner that I want to try out. (Unlike most stuff at the space, 3D printers have a per-hour cost to use, which covers filament and maintenance.) Next is the electronics room. I don't know much about the stuff in there, but every time I've asked about something electronic, someone has told me, "Yeah, we have that." People make cool robot stuff there. The fiber arts room has a computer embroidery machine that I'm looking forward to making stuff with. There's a projection system for cutting fabric from projected digital patterns (instead of old-fashioned tissue paper patterns). There's a lot of other sewing equipment, and stuff for other fiber arts, such as knitting. Across from the fiber arts room is a kitchen, more like an office break room than a full-featured kitchen, but great for making tea or coffee, or warming up snacks from the Safeway across the street. Around another corner is the laser room. It has a Mira 9, a fast, powerful laser cutter with a large workspace (two by three feet). There's also a Glowforge, a desktop sized laser cutter. (Laser cutters have an hourly fee because they're maintenance is expensive.) Finally, there's the Wazer room. What'a Wazer? It's a waterjet cutting machine, which can cut through metal, ceramic, glass, possibly even kryptonite. It uses water at extremely high pressure, with a slurry of garnet abrasive. I want to learn to use it! (It has a fee because maintenance and the garnet are expensive.) The Wazer room opens to a small deck. About the only maker department that isn't well covered is metalworking. A _few_ of the woodworking tools can also be used on metal, the Wazer can cut metal, and the Dremel in the craft zone can be used on metal. But if you want to do welding, forging, heavy-duty bending, casting, and so forth, there aren't a lot of options in metro Seattle. It's also not a ceramics shop. I've been a member for quite a while, which is about as strong an endorsement as I can offer.

The Fishbowl is an amazing space for co creating with other artist and participating in workshops,…read morefigure drawing, open mic nights, community activities, and makers markets! It allows for local artists to grow and collaborate with one another. The Fishbowl is also the finding group for the Uptown artwalk. The space has been so welcoming and I love coming here to meet with other artists! I've made some great friends! I highly recommend checking out the space wether your looking for a studio or just looking to hang out with other artists!

Giant shared woodworking shop with many fun machines and tools. Lathes, CNCs, routers, sanders,…read moreplaners, jointers, saws galore, all the things. There's even free scrap wood, a lending library, and a bandsaw big enough to resaw a coffin. Free parking and plumbing, plus everything you need to make some sawdust.

Isgood is as good as one can get in Seattle for a woodshop space where you can build to your…read moreImagination. Reading the other reviews makes me laugh. John (the previous owner). Was true to his name, Blunt, he had a way of doing things that was direct and was not flexible. Sadly he recently passed. Andy took over and is a great guy and very patient. Don't let the older reviews keep you from visiting.

Very helpful staff and there is an extensive supply of different tools for many projects.read more

The tool library in Capitol Hill is fully volunteer run in a Capitol Hill parking garage which is…read moreleant out but a neighboring church. The volunteers are SO kind and helpful! They are located in a central location in cap hill right off of pike street. They offer a huge range of tools from arts and crafts, culinary tools, lawn care items, and so much more! I highly recommend stopping by or donating your used tools to this place!

I love this place! It's like a thrift store for your crafting needs. Yarn, fabric, art supplies,…read morestickers, papers, embroidery, needlepoint, used stamps, vintage photos, international paper money, etc. They also have used books/magazines for crafts and plastic containers. I found some themed collage packs - valentines and Disney themed and a plastic container to store my washi tape! Everything is super affordable too.

Seattle ReCreative is a cool place to browse for odds and ends that you need for your latest…read morecrafting venture. Need a few Scrabble tiles? This is the place. Want just enough Modge Podge to finish that decoupage project? Go here. Need some rubber stamps to make homemade cards or gift tags? Definitely go here! They have a big selection. The place is rather messy and hodgepodge and had an odd smell when I was there. If you're someone who likes their shopping experience to be clean, well-lit, and orderly, this ain't your joint. But it's fun to go through the shop to inspire yourself and see if any treasures call out to you. Some things were a great buy and some were not, so shop wisely. Staff were welcoming and friendly, and I support the reuse and upcycle mission of Seattle ReCreative, so I'll be back.