Very responsive. Appreciate always a cheerful returned call . Have used this company in the past…read moreand was a pleasure to do business with

Working with Victor was truly a pleasure. We were required to install new railings into a laundry…read moreroom and I only had 30 days to get it done. I tried to get in touch with some other companies who never bothered to get back to me. When I called Victor, he came out within 2 days and measured the area. He fabricated and installed the new railings within a week. They look beautiful! I highly recommend this company to anyone who needs wrought iron work and I will definitely use him again.

Wonderful people to work with. Love supporting a family business. Appreciated the prompt…read morecommunication during all aspects of the job. From estimate to install, everything was smooth and easy. Gate looks great. 100% recommend this company.

I needed a small entry gate to my front yard (5' opening), I reached out to quite a few companies…read moreon yelp, a few responded back with outrageously expensive quotes. When I contacted Duncan welding, I received a response very quickly. Their answers were direct and addressed my needs and they were happy to answer my questions. They provided a reasonable, and affordable quote, and one that was close to the actual, final cost. The quality of the work completely blew me away, I am so impressed. The level of craftsmanship, attention to detail, and obvious passion for the craft really shines through in this gate. Everything is level, straight, and fits perfectly. Truly a master in his craft. As a person who prefers to give business to a local, family owned company, I would absolutely recommend David, and Kelsey of Duncan welding to anybody reading this and I will be a continued customer for any future fabricating needs. Thank you guys very much.

Do not work for this company or give work to this company. They Mickey Mouse projects (I've seen…read morefor myself) and they rob their employees of wages. I used to work here and I seen and experienced for myself how things are done half assed. If you need to have epoxy done, make sure you check all of the all threads because I can guarantee you most of them are cut short because they ran into rebar. If you had anything done by them, double check that it was done right. If they treat their employees like trash by not paying them, imagine how they treat their work.

We found Nate's attitude to be professional and the work to be absolutely wonderful. He came out…read moreand took our chairs, bar stools and patio recliners. They came back beautiful. He also recommended we not powder coat a Mallin patio set as he thought it would not adhere well. We admire his honesty and he did not charge for pick up or delivery. We highly recommend him.

Emanuel and his team did a fantastic, punctual, and honest job. We are very happy with their work;…read morehe didn't ask for a deposit--he simply manufactured and installed it, and then we paid. Thanks for your work, Emanuel.

I am writing this review reluctantly as I knew Enanuel to be a reliable person several years back…read morewhen he did a gate for us. Unfortnately my experience with him recently, has been very disappointing. I paid Emanuel a $500 deposit in February for custom gates. Over the next several months, I received numerous promises that the gate would be installed "tomorrow," "Tuesday," "Friday," "this Saturday," or "next week." Each deadline passed without the work being completed. Throughout the process, Emanuel repeatedly apologized and cited different reasons for the delays, including roofing issues, measurement problems, painting, and personal setbacks. I remained patient, communicated respectfully, and gave him many opportunities to complete the job because I understood that life can be difficult. Unfortunately, after months of missed commitments, I requested my deposit back. Despite my repeated requests, I did not receive the work I paid for, or the refund I requested. My experience was disappointing not because of a single delay, but because of the repeated promises over several months without follow-through. I hope others have a better experience, but based on mine, I cannot recommend this business.

I agree with Luke's review- Chris is a sharp young guy and knows his stuff…read more I was referred to Chris by a friend who owns a dirt bike shop in Simi when my Polaris RZR tore an A arm mounting bracket off the frame, messing a lot of stuff up ( technical terms). 3 years later, I'm still using Killer Off Road because of the service. Even better, Chris moved from Moorpark to Simi to be closer for me-- well it worked out that way anyway. I recommend Killer Off Road highly.

Chris at Killer Off Road turned my tame RZR into a beast! Excellent attention to details and…read moretreated my utv as if it was his. I will NEVER take my ride any where else!

I needed a steel framework built for a project at work. My usual shops had ridiculously high…read moreestimates. A friend recommended Slims and brought him a drawing. He estimated HALF of my lower quote. I whipped out my company credit card and he said to put it away until the job was done. He sent it out for paint after fabrication. Such a good job I had him do it again a few years later for a different project.

Tim is amazing. You will not find a better welder with the knowledge he has in the area. Prices are…read morevery reasonable. If it needs welding or fabricating he can do it.

Alex did an amazing job making gates for our yard. High quality, great, prompt and…read moreprofessional service.

Haas metal designs did an amazing job installing our new gate. The gate looks beautiful and opens…read moresmoothly every time. Really appreciate the craftsmanship and professionalism. Will for sure use again!

I needed a metal bracket fabricated to hold a fire extinguisher under the seat of my truck…read more These guys were able to make the bracket, mount the extinguisher, and weld it into place while I waited, and watched. I love shops like this. A bunch of hard working, honest guys who fix problems, without any nonsense. If you need metal fabrication, or metal repairs, like on a tractor or a truck, give these guys a call.

My go to guys for getting any type of steel or metal work done. From fabrication to welding to just…read morepicking up some steel from them, they have it all.

I visited AP recently to have a custom steel part fabricated for my motorcycle. They came highly…read morerecommended from a friend who works at a machine shop. The part I needed was a simple flat piece of mild steel with two bends, 6 holes and some deburring. I included a detailed 2-dimensional drawing and spoke with one of the technicians for about 20 minutes to confirm the details and make notes. He estimated this to be about 1-hour of work or less and that it would cost about $55-60. I informed the technician that I needed the part in less than a week, because I had to install it prior to a trip I was taking. He assured me it would only take a day or two. The following week I still hadn't received a call back from AP, so I called on Tuesday to ask about the status of my part? They said they hadn't gotten to it yet. I reminded them that this was a time-sensitive job. He said to come by to confirm everything with his boss, which I did. The boss raised the price to $85, which is on the high side for such a simple job, however it was still under my $100 budget, so I gave the "Okay". They also demanded a deposit before beginning work. Next they called on Thursday and let me know the part was ready to pick up that evening. I stopped by after work and there was still no part. In fact it hadn't even been started! After wasting time and gas, I once again emphasized that this had to be finished no later than Friday. The next day, on Friday, I finally received a call stating that the part was finished and ready to be picked up. I had a friend stop by after work and retrieve the part, however when I got home, there were some errors. Two holes were drilled far larger than the drawing called for and were in the wrong location. In addition, the sharp corners weren't radiused as specified and nothing was deburred, so it had sharp unfinished edges everywhere. After about an hour of additional work in my garage, I finished the part myself and after redrilling, I was able to make it work. However I wasn't pleased about the delays, the increased estimate, the unnecessary trip, and the poor quality of the finished part. If it weren't for the extremely courteous and apologetic technician I originally spoke with at AP, they would only deserve a one-star rating.

I bought a piece of used sports equipment that hasn't been made in over a decade. It was missing a…read morepart and Jamie helped me make it from scratch. I brought everything in, showed him a video and a few pictures and he was confident that he could do the job. The part came out perfect-I would definitely come back to Fab-Tech again.

Jaime is a great guy. I would not put any weight on the one negative review, it does not match my…read moreexperience at all. He was transparent from the start, took on my random job without hesitation, and delivered exactly what he said he would. He is knowledgeable, competent, and easy to work with. I would highly recommend him to anyone I know.