Another fine craftsman, found on Yelp!…read more I found GoFab when searching for machine shops and metal fabricators on Yelp. The reviews looked great, so I did my usual armchair vetting by checking the reviews on Fakespot.com, a website that verifies the legitimacy of user reviews. GoFab is rated "Grade A"! I wanted to replace an automated front door lock with a newer wireless model. The only problem was that the newer lock face plate is smaller than the old one. This would leave exposed screw holes in our door which would be obvious, even if patched. I needed a custom decorative plate to cover the old holes. I stopped by GoFab and met Jason, a surprisingly young man for being proprietor of such an advanced shop. He instantly understood what I wanted. Within two days he emailed me a detailed shop drawing of my piece. It was exciting to see my idea one step closer to reality! I should mention that this was a bit of a rush job which Jason finished for me in ample time. The finished product is beautiful and fully serves its purpose, the cost was reasonable and Jason is an exceptionally nice person. I am happy to recommend GoFab and to add my 5-Star review to their growing list of perfect reviews.

This is my second time having Jason commission me something. He always does a great job! His work…read moreis very accurate and quick. He does a very beautiful job and you can tell that he really enjoys his work. I commissioned Mirai's Blood Sword from Kyoukai no Kanata and it turned out exactly as I pictured it! It was the correct length and the curves were very nice. He even beveled the edges to give it 3D dimension. The only thing I am concerned about is the blade being too heavy for the handle. Other than that, it was beautiful! I would definitely commission Jason for future products. I have been recommending him to some friends as well. If you have a project, you should ask him for a quote!!

Requested an engine cover to replace a worn, sagger as they are no longer available OES or…read moreaftermarket. Owner took a great deal of time to understand what was needed, materials then make the honest assessment it was not something safely done by OCF. Absolute value these days as able to find a solution, and no charge from OCF. No question will find a good payday and use them. Obviously good work as well as principled ownership. Will not hesitate to use them.

Miracle Fix: Jose and Lorenzo Saved My Miata. Answer to my…read moreprayers. Expert welders and fabricators. My Mazda developed a loud rattling and knocking noise underneath and no one could figure out why. I went to eight different shops. Each one gave me a different guess: heat shields, engine mounts, catalytic converter, "play in the differential," you name it. Nothing made sense, and the noise was so annoying at red lights and/or with foot on the brake . Finally, one honest shop (Thanh Auto in Garden Grove) spotted the real culprit: a big clean crack in the aluminum mounting bracket attached to the differential housing. Every mechanic I spoke with afterward told me the same thing: "Only solution is to drop the entire differential and replace it." Translation: very expensive. Thanh's expert ( Keith) suggested welding the crack, but every welding shop I contacted said the same thing -- "No space. We'd have to remove the differential before welding. Almost as costly as replacing the whole diff." Then I found Jose at OC Fabrication on Yelp. Within minutes of sending him a photo, he replied ...fast, professional, and confident. He said it might be doable without removing the diff, but he needed to inspect in person. He even gave me two honest estimates: a higher price if the diff needed to come out, and a much lower one if he could reach it in place. He squeezed me in after hours the very next day. He and his welder Lorenzo crawled under the car, inspected the crack, and confirmed they could do it without removing anything. They carefully jacked the differential to realign the broken ear, cleaned the aluminum, welded it beautifully, and then reinforced it with additional metal. All in under 90 minutes. When we test drove the car afterward -- night and day. Smooth. Quiet. Solid. The rattling and knocking that haunted me for a weeek? Gone. Jose told me straight: most shops wouldn't even attempt this kind of repair. But he and Lorenzo took it on with skill, confidence, pride in their craft, and real customer care. They solved a problem that eight other shops shrugged at. I can't recommend these guys enough. Professional, talented, honest, and genuinely passionate about their work. Bravo, Jose and Lorenzo. Many thanks. Bonus: Their shop is amazing -- full of unique custom fabrication projects, metalwork, and creative builds. Kudos for their skill and craftsmanship and care.

Have used them in the past and although it came out higher than expected, they were transparent,…read morehonest and cordial. Fast forward to this instance where I have a batch of rotors that I needed to be turned down 1mm each side. Call him, describe what I'm needing and ask if he has a rough estimate on price. He asks me to text pictures, I jot down his number and then send him pictures shortly after. Gave him an hr or so and called him back to see if he received the pictures. Doesnt reallt acknowledge it and is pushy to have me bring them in and that he can do it. I'm about 25ish mins away, but he insists that he'll be late at the shop and that it's no problem. I bring in 1 rotor to see if he can still give me an estimate and he suggests he can help me bring in the rest of the rotors, about 10 in total. As we're bringing them in, I ask him again how much he's thinking it's going to be and he mentions $50 each. At this point, it's beyond the threshold in which the supplier was going to reimburse me for so I ask if I can just machine 2 rotors for now and figure out what can be done with the supplier. The next week rolls around and days go where I dont hear anything. I text him and no response for a day or 2. I call later the following week and he gives me a response like the rotors have been done and that he's been waiting on me. I ask him texting is the best method of communication since he originally asked me to text and he said text is good. I ask him if he's been receiving my texts in which he responds with affirmation. I go to pick up the rotors and come to find out that he only did a single rotor in which I ask when the other side would be done and he says in about 1-2 business days. I say that's fine and then mention that I'll leave that single rotor behind and grab the rest. He then mentions that if I in doing just 2 rotors, that the price would be $100 each. At this point, I'm no longer feeling like this is about money and get the impression that he's just a shady crook now trying to take advantage of people. I'm a little shocked at the pricing at this point and ended up just taking all the rotors back and paid him his $100 to machine a single rotor. Ended up having another shop do the for $20 each

Great work and quality customer service from start to finish. Everything you need from a business.read more

Sooo we came in with a kinda complex part that NO other machine shop wanted to tackle BUT David at…read moreDK took it on with no problem! He flagged any potential problems with our drawings and got the part done in a timely manner. He'll be our go-to guy in the future. Appreciate it everything!

From the owner: DK Precision Machining specializes in precision CNC milling and turning of many materials such as…read morestainless steel, aluminum, and plastic. Serving Orange County and San Francisco/Bay Area. We offer precision machining for aerospace, semiconductor, pharmaceutical, optics and commercial product industries. Here at DK, we take pride in being reliable, precise and prompt. Our customers’ success is our number one priority, which is why we do everything we can to exceed our customers expectations. You can rely on our small family owned business!

Excellent service! Requested a quote for a few parts that need to be done. Received my quote with…read morein a few hours and the job was done by the next day. Parts fit great. Very good quality and will be back with more jobs.

From the owner: Specialized in CNC Machining and Conventional Machining…read more J.F. Machining services local customer, large/ bulk ordered jobs or long term jobs.

Love this place. Talk about metal toy store for grown ups. Have used them quite a bit for designing…read moresome cool projects. They just keep growing with new stuff. Check them out.

I have been trying to order a hinge for a month now. This company doesn't respond to online…read moreinquiries apparently. I've been a builder for 40 years and know exactly what I want. I asked for a price quote online on May 18th 2026. Today it's officially one month since my request. I'm a customer willing to complete a transaction, but Industrial Metal Supply just can't seem to handle it.

Decades of experience and quality work. I have used them several times and they know BMW motors.read more

I decided to give Engine Supply a try after my previous engine developed a major oil consumption…read moreafter a rebuild. I have yet to disassemble and determine the cause on that engine. I needed some cylinder head refresh work done on a replacement engine and took my head here. It's for a bmw s54 engine. I understand Engine supply does a lot of domestic work but will also do European and Japanese engines. After speaking with one of the guys, I found out that it's a family owned and operated company. The guys are definitely knowledgeable. The cylinder was picked up and was in great clean condition as expected by a good machine shop. What impressed me was they took me to the back to show my cylinder head during assembly when I dropped off my valve seals. The shop is well organized and clean. When I picked up the cylinder head, the Machinist who worked on my cylinder head also mentioned that the valves were returned in the exact order it was removed, which makes putting the shims I removed back it the same order easier to adjust the valve clearance on assembly. The cylinder head was assembled back into the used block. And is now running in the car without any oil consumption. It has done multiple track days without issue. I'm very happy with their work and can vouch that you are getting top notch quality work. Thank you Engine Supply Team! -Clarence