GoFab

(41 reviews)

Requested an engine cover to replace a worn, sagger as they are no longer available OES or…read moreaftermarket. Owner took a great deal of time to understand what was needed, materials then make the honest assessment it was not something safely done by OCF. Absolute value these days as able to find a solution, and no charge from OCF. No question will find a good payday and use them. Obviously good work as well as principled ownership. Will not hesitate to use them.

Miracle Fix: Jose and Lorenzo Saved My Miata. Answer to my…read moreprayers. Expert welders and fabricators. My Mazda developed a loud rattling and knocking noise underneath and no one could figure out why. I went to eight different shops. Each one gave me a different guess: heat shields, engine mounts, catalytic converter, "play in the differential," you name it. Nothing made sense, and the noise was so annoying at red lights and/or with foot on the brake . Finally, one honest shop (Thanh Auto in Garden Grove) spotted the real culprit: a big clean crack in the aluminum mounting bracket attached to the differential housing. Every mechanic I spoke with afterward told me the same thing: "Only solution is to drop the entire differential and replace it." Translation: very expensive. Thanh's expert ( Keith) suggested welding the crack, but every welding shop I contacted said the same thing -- "No space. We'd have to remove the differential before welding. Almost as costly as replacing the whole diff." Then I found Jose at OC Fabrication on Yelp. Within minutes of sending him a photo, he replied ...fast, professional, and confident. He said it might be doable without removing the diff, but he needed to inspect in person. He even gave me two honest estimates: a higher price if the diff needed to come out, and a much lower one if he could reach it in place. He squeezed me in after hours the very next day. He and his welder Lorenzo crawled under the car, inspected the crack, and confirmed they could do it without removing anything. They carefully jacked the differential to realign the broken ear, cleaned the aluminum, welded it beautifully, and then reinforced it with additional metal. All in under 90 minutes. When we test drove the car afterward -- night and day. Smooth. Quiet. Solid. The rattling and knocking that haunted me for a weeek? Gone. Jose told me straight: most shops wouldn't even attempt this kind of repair. But he and Lorenzo took it on with skill, confidence, pride in their craft, and real customer care. They solved a problem that eight other shops shrugged at. I can't recommend these guys enough. Professional, talented, honest, and genuinely passionate about their work. Bravo, Jose and Lorenzo. Many thanks. Bonus: Their shop is amazing -- full of unique custom fabrication projects, metalwork, and creative builds. Kudos for their skill and craftsmanship and care.

Hand Crafted Metalworks

1.8

(5 reviews)

I had a very disappointing experience with Hand Crafted Metalworks…read more From the beginning, I was extremely clear about what I wanted. I provided a reference photo on the very first day and made it known that I am very detail-oriented, especially because this was a major custom staircase railing project costing around $20,000. I wanted the finished product to closely match the design, proportions, style, and overall look of the reference photo. Unfortunately, the process became frustrating and confusing. Instead of feeling like my vision was being understood and executed, I repeatedly felt like the design was being scaled back, reinterpreted, or changed from what I had originally requested. Multiple revisions were needed because key details were not reflected properly, including how the railings were supposed to continue down the lower steps and terminate at the bottom. One major issue was that the shop drawings showed a rectangular/square wood cap, even though the reference photo I provided showed a round wood handrail. That was a major design difference, not a small detail. For a custom project of this size, I expected the drawings to accurately reflect the design direction I had communicated from the start. Another major frustration was the coordination process. I hired Hand Crafted Metalworks expecting them to manage the project. Instead, I felt like I was being put in the middle between their metal team and their wood subcontractor. I was connected directly with the wood subcontractor, who appeared to be unaware of important details, including that the wood was already part of the original quote. At one point, it felt like I was being asked to coordinate or clarify things that should have been handled internally by the contractor. There was also confusion around the timeline. A timeline that had been discussed as approximately six weeks later appeared to become September, which was a significant difference. When I asked for clarification, the conversation became defensive instead of simply explaining the scheduling change. Overall, my frustration is not just about one isolated issue. It is about the entire process: repeated miscommunication, inaccurate design assumptions, unclear subcontractor coordination, changing expectations, and a feeling that I had to keep fighting to preserve the original design vision I clearly communicated from day one. For a high-end custom project, I expected a much smoother and more professional process. Instead, I felt like I had to constantly correct, clarify, and manage details that should have been understood and handled by the company. Based on my experience, I cannot recommend this company. I'd post only after the credit card dispute is filed, not before, and keep screenshots/emails organized in case they respond publicly.

Our experience with this company was extremely frustrating. After paying our deposit, the project…read morewas ridden with missed appointments, poor communication, and repeated mistakes. Our primary point of contact, Chris, was responsible for coordinating the project, yet we frequently had to make multiple calls just to get updates or receive a response. On one occasion, workers arrived at our home, informed us they needed to leave to purchase materials, and then never returned that day. The problems extended far beyond scheduling. The initial measurements taken for our custom railings were inaccurate, resulting in the wrong product being fabricated. When installation day finally arrived, the wrong order was delivered. We were assured the mistakes would be corrected, only for another incorrect order to arrive later. The same crew was repeatedly sent back to address the issues, yet the problems remained unresolved. The quality of the installation itself was also concerning. The railings were improperly installed, caused damage to our walls and floors, and portions of the installation began pulling away from the wall within a month. Given that stair railings are a safety feature, this was particularly alarming and further diminished our confidence in the company's workmanship. What should have been a straightforward project turned into months of delays, repeated errors, broken promises, and constant follow-up on our part. We were repeatedly given timelines and assurances that were never honored, and obtaining updates often required persistent phone calls. The most disappointing part was not the mistakes themselves, but the lack of accountability and follow-through. Every issue seemed to require multiple calls and reminders, yet meaningful resolution never came. After months of frustration, we ultimately canceled the contract because we no longer trusted that the project would be completed correctly or safely. Mistakes can happen in any business, but professionalism is measured by how those mistakes are handled. Unfortunately, between the inaccurate measurements, incorrect fabrication, poor installation, wall damage, communication issues, missed appointments, and failure to stand behind the work, our experience was extremely disappointing. I cannot recommend this company.

Superior Welding & Fabrication

(7 reviews)

Ernesto is the BEST! My son's Super 73 e-bike frame had a major crack. Super 73s option was a new…read morebike or frame and that's not in the budget. We called Ernesto and sent pictures of the damaged frame and he said he could definitely help us repair the frame. In fact, we called on a Thursday night after hours and he answered all our questions (I was just going to leave a VM for next day). Ernesto was communicative re: our project throughout the process. We dropped the bike off and repair was done same day. My son's frame is fixed and stronger than ever. He's ready to ride again thanks to Superior Welding and Ernesto!

Amazing. No other business wanted to help me straighten a brass shaft. Contact Ernesto, brought it…read morein and he did it right there and then for a reasonable price too. Thank you.

Reyes Ornamental Iron

(168 reviews)

I highly recommend Carlos and Reyes Ornamental Iron for any interior or exterior iron work. I first…read moreworked with Carlos and his team during a home renovation in Laguna Niguel. They fabricated a balcony railing, two side-yard gates, and two gates for a dog-run enclosure. The quality of the work was exceptional--from the high-quality materials and beautiful craftsmanship, to the flawless painted finish. I provided Carlos with a few inspiration images and an explanation of what I wanted. He returned drawings for my approval, and every piece turned out exactly as I had envisioned. His pricing was very fair, and both the fabrication and installation were completed quickly. After recently moving to a new home and adding a balcony, I contacted Carlos again because I had been so pleased with his previous work. Once again, the railing was completed promptly and beautifully. I chose a very simple design for this project, but I have also seen Carlos's more ornate work, and he is exceptionally talented. Carlos is professional, responsive, and committed to delivering outstanding results. I would not hesitate to work with him again and enthusiastically recommend Reyes Ornamental Iron to anyone looking for beautiful, well-crafted ironwork at a fair price.

Called Carlos to get an estimate for an iron railing. He arrived on time and assessed the…read moresituation. He gave me his professional opinion about improving work done before installing a railing. I really appreciated his effort and courtesy advising me to be happier in the long run before installing the railing. I appreciate his time and will definitely call him for any iron work. He has many years experience in his craft and he is also very informative and patient with clients. Thank you Carlos!

Cruz Ornamental Iron Works

4.9

(43 reviews)

I needed to repair a gate that rusted and broke at the base and Juan came out the same day and gave…read moreme the option to repair or replace the gate. I opted for repairing. He even painted, added latches, and reinforced it so it would be totally secure for my insane parkouring pittie. While he was here I asked about another gate that was giving me trouble (because it was done by some hack who is no longer on yelp) and he pointed out all the places that needed addressing. He took the whole gate down, reworked it, created a new panel, painted and reinforced the hell out of it so I wouldn't run into the same issues again. Juan is quality and customer service oriented and his work shows it.

Cruz Ornamentals did a great job of a Juliet Faux Deck. They were able to get it done quickly in…read moreorder for us to close the sale of a home. I was representing the seller, and we had a very short window to handle it. They were very professional and did a wonderful job!

Oc Metals

4.0

(4 reviews)

I am a metal contractor and I typically source manufacturer direct, but whenI need help from a 3rd…read moreparty, I've dealt with Harmony a couple of times and she is excellent. Always sweet, patient & helpful.

We have used this company many times in the past and every single time has been an pleasurable…read moreexperience. Easy, stress free and on time. Custom manufacturing is always expensive but they are worth every penny. They have built several custom arched copper caps with rolled over edges. 12'-16' 316 stainless steel sheets with 90° angles angles on the corners and other odd projects. Thanks for the great service OC Metals Reason for 5 Star Rating * Open 5 days a week * 3-4 turn around times * Major Credit Cards Accepted * They deliver for $40-$50 depending on Location * Exelent Customer Service (Ask For Juan)

Gutierrez Manufacturing

(9 reviews)

Long story short, my 25 yo bbq died and needed to replace it. After 25 years,, somewhat difficult…read moreto find a bbq grill with the same dimensions. I found one pretty, pretty close, but I needed to raise it up an inch. That's where Gutierrez Manufacturing comes in. Alfonso listened and came up with the perfect solution at a reasonable price. The workmanship is outstanding, measurements were exact and it was ready when promised. The finished frame looks like it was made to go with it and finishes it perfectly. I have some other projects I will definitely be going there for fabrication.

This shop will be willing to listen to any request you may have. I brought a stainless steel hinge…read morefrom my fishing boat that needed a new rivet and Jesus fixed in 10 minutes for $5.00 and I couldn't believe what I had just witnessed. Welding, sanding, a true artist at work making at happen before my eyes. I was out of there in 15 minutes with a fixed part. This is the type of business America was built on and we need to do our part to keep it going.

SoCo Metal Works

(25 reviews)

Jim does incredible work. His railings and metal fabrication are truly next level--clean, precise,…read moreand built to last. I reached out to multiple companies, and he was by far the most proactive and professional, which instantly gave me confidence I was choosing the right person. I'm very glad I trusted my instincts because the finished product is outstanding. He made the entire process easy, stayed responsive the whole time, and delivered quality that speaks for itself. Highly recommend. Thank you, Jim--I'll be referring people to you 100%.

These guys are great. Jim drilled a small hole through a steel tiller extension and spared me a…read morebig headache. While I was waiting I saw a very nice steel stair & handrail that they were working on...super clean work!

SB Steel Fab

(9 reviews)

Sebastian really came through. I had a project to cut through a couple 3x3 11 gauge steel…read morecrossmembers for my gym. I wasn't able to drop it off but he was able to workout a deal with my and came by my house to complete the job. He was quick to respond and took his time to make sure the cuts were smoothed out. Definitely recommend him if you have any metal working projects! I was able to complete my custom dumbbell stand with his help cutting the cross members.

Sebastian did a terrific job adding a hitch receiver to my trailer. The prep work, welding, and…read morepainting are all top notch. Highly recommended!

Orange County Engraving

(117 reviews)

Customer service dream from first contact to picking up our item...communication was amazing! The…read moreexperience was so awesome I'm thinking about what else me or anyone I know needs something customized (engraved)!!! From the moment we requested engraving on a small area of a putter, we heard no problem...bring it in and we'll do some mockups after we know what you want. Next morning mockups to be approved, once approved the work was done. They quoted a 2-3 day turnaround and delivered in about half that. Day and a half at most. Love when people stick to their word...this place went above and beyond! Will clearly be coming back again soon!

You can't beat service like this. Personal, attentive, consistent…read more You have earned my business for life. As a mixologist, I need custom stencils built to a professional grade since my clients are spread throughout the 90210. I am quite impressed and will let my people know about your work.

Seiko Watch Time Zone

(221 reviews)

•$

Went into shop specifically looking to purchase a new Seiko has I heard they had a great selection…read more Frank patiently answered all my questions and showed me many Seiko watches. He explained the nuances of each model and never hurried me. It was a complete opposite with what I experienced the previous shop I went to. I narrowed down my choice and purchased a great looking watch. So friendly and competitively priced. Thanks Frank! I will be back for sure

My husband found this shop while we were visiting the area. A busy place with exceptional service!…read moreWe came in to have a watch adjusted and ended up buying an additional watch! I also may have found a great Christmas gift for my Mom.

Bay Auto Service

(45 reviews)

I rarely leave negative reviews, but I feel compelled to share this experience because of how my…read moreson was treated. My son recently moved to the Los Angeles area and drives a late-1980s Chevrolet pickup. While driving, the truck suffered a catastrophic failure of the right front lower control arm, making it unsafe to drive. AAA towed the truck to Bay Auto Service. Before the truck was even unloaded from the tow truck or inspected, the person my son spoke with, who I believe was the manager, told him he could expect a repair bill of up to $2,500. Since my son had just relocated and was on a limited budget, he called me for advice. I spoke directly with the manager and asked whether anyone had actually inspected the truck or confirmed the cause of the failure. He admitted they had not. Instead, he immediately focused on whether my son had money to spend. He stated that it wasn't worth trying to help someone if they didn't have money. My son may have limited funds, but I do not, and I was prepared to help if the repair was justified. The conversation became even more disappointing when he proudly said, "No moolah, no fixie." He also stated that even if we wanted the truck repaired there, they couldn't even look at it for at least two weeks. He added that both of his mechanics were too old to push around a large truck. What bothered me most was not that they were busy or that the repair might have been expensive. Shops get backed up, and repairs can cost money. What bothered me was the complete lack of professionalism, empathy, and willingness to help someone who was clearly dealing with an emergency. A simple inspection or a respectful conversation would have gone a long way. Fortunately, we found a tire and repair shop next door. They immediately looked at the truck at no charge, correctly diagnosed the failed lower control arm, quoted a very reasonable $450 for the repair, and completed the work the very same day. That is what customer service looks like. My experience with Bay Auto Service was the exact opposite. Whether the person I spoke with was the manager or the owner, I hope this serves as constructive feedback. Treating people with respect costs nothing. Even when someone cannot immediately afford a repair, they deserve honesty, courtesy, and compassion rather than arrogance and dismissive comments. I cannot recommend Bay Auto Service based on this experience.

Took my 95 Ford Bronco to Joe to do maintenance and fix some electrical stuff like the locks and…read morewindows. Joe was great and very knowledgeable. Thanks Joe!

European Car Specialists

4.2

(35 reviews)

European Car Specialists is number one with in services for my 2007 Porsche Carrera coupe! The…read moreowner, Singh, has the experience and knowledge to keep my Porsche performance running like new! From oil changes to tune ups, European Car Specialists, is the place to keep your car running like new. I would recommend European Car Specialists to everyone serious about keeping there car running great! Have a question about your car? Stop by to talk about it! I will be back!!!

Called today very disappointed I was trying to get a second opinion on my 2012 e 63 AMG I honestly…read moredidn't even care about paying for them to check where the leak was coming from he was rushing me while we were talking on the phone he must have lots of cars and business for him not to care about new clients.

Simone & Son Jewelers

(394 reviews)

•$$

I wish I had gone to Simone & Son first. After another jeweler damaged the delicate details on my…read moresentimental ring and refused to make things right, I was heartbroken. Simone & Son listened with compassion, came up with a thoughtful restoration plan, charged half the price I'd already paid elsewhere, and returned my ring in just three days. The craftsmanship exceeded my expectations. My ring is beautiful again, exceeding my expectations and I couldn't be happier. Their kindness, professionalism, communication, and attention to detail were outstanding! They've earned a customer for life. Thank you Shant, JJ, Angela and the jeweler/stone setter, whose name I don't know, but will always be grateful for. You're a true artist.

Simone & Son was the first place we went to ring shop on a whim found from Yelp, and when deciding…read morewhich jeweler to go with, we kept landing back here. I came to them with a laundry list of mismatched things I wanted in the rings, but Angela's knowledge helped me narrow down what I actually wanted - an engagement ring and wedding band from a different jeweler but have S&S execute the customization to fit my diamond. Shant was very patient and delivered beautifully with my dream rings to real life. Long story short, I'm extremely happy with the final products! They offer lifetime warranty on the smaller looser stones, reasonable pricing for customizations, and excellent customer service.

South Coast Jeweler

(399 reviews)

•$$

My fiancé began his ring search knowing almost nothing about diamonds but was willing to explore…read moreand learn. He visited several jewelers across OC, from large retailers to family owned stores and even some that were recommended by other friends/family but none compared to the genuine care and honest customer service he received from Kathy and Jenny here! I came with my fiancé on his first visit here to get sized and choose some shapes that I preferred. Kathy patiently walked us through sizing and explored different shapes with zero pressure and so much patience. We loved how relatable she was and how natural and genuine our convos went! When he returned on his own, Jenny took her time to educate him fully and showcased her expertise (being in the business for 30+ years) and made sure he truly understood every detail, not just the 4 C's, but things other stores never even mentioned so he could feel confident making such an important decision. They actually encouraged him to even take his time and check out other places to make sure he was confident in his decision. This kind of customer care made all the difference! I didn't see the ring until the proposal, and it was absolutely perfect! But what makes it even more meaningful is knowing how much thought, care, and intention went into choosing it and how much of that came from the guidance he received there. I really can't thank both Jenny and Kathy enough for making his experience so smooth and seamless! If you're starting your ring journey and feel overwhelmed, go to South Coast Jewelers. They don't just sell you a ring, they make you feel confident, excited, and taken care of which makes this kind of experience so much more priceless.

Stopped by because my boyfriend and I were ring shopping! Didn't need to book an appointment and…read moreeveryone was super sweet and helpful. Gave us the entire breakdown regarding ring quality, cut, etc! They have both lab and mined diamonds! They are also custom jewelers so you can tell them what customizations you like!

GoFab - engraving - Updated August 2026

People found GoFab by searching for…

People who viewed GoFab also viewed

The Burners' Society

(75 reviews)

Although we ended up going a different direction for our project, working with John was a great…read moreexperience. He was professional, patient, and genuinely helpful. I really appreciated his honesty and his willingness to help, even with a short turnaround at a fair price. I wouldn't hesitate to work with him in the future or recommend him to others.

John was a pleasure to work with! He was very responsive. Completed my project on the same day.read more

HEMN design & laser studio

(18 reviews)

Billy was amazing to work with--quick to reply, extremely friendly, and made the entire process…read moreeffortless. He even accommodated our fast turnaround. The engraving was impeccable! I highly recommend Billy for all engraving needs!

HEMM Design was very fast, helpful, accommodating, and does amazing work at a great price! I needed…read morea name engraved on a bottle he responded quickly offering his services/prices. He sent me a website with hundreds of fonts to choose from that was easy to filter thru and select my choice. I made an appointment that week and he had the bottle done in 15mins. I've never really used engraving services before but now that I have I'll be going back to HEMN a lot more. It turns small or large gifts into something even more thoughtful.

Corporate Awards & Engraving

(20 reviews)

Daman was amazing!! We needed last minute awards and he made it happen. He got everything done in…read moreone day, right after I called him. Thanks so much, Daman!

This place deserves nothing less than 5 stars across the board. Thank you to Daman for opening my…read moreinquiry and responding to all my messages so promptly. Thank you to Martin for assuring me that my project wouldn't be an issue, and giving me beautiful options to pick from, and producing my items in such a short amount of time. This team is amazing, very kind, and their prices are very reasonable. They could've priced gouged me for the holiday but they didn't and I believe that says a lot. They gave me exactly what I asked for plus more...if I ever need anymore engraving done I'll be back to get it done here! Thank you so much!

Noack Awards & Engraving

(53 reviews)

•$$

5/5 for Noack Awards & Engraving. Local family owned business that I've used for 15+ years. Very…read morereasonable pricing considering the high quality of their work.

Got a cutting board engraved and it turned out beautiful and nice fair prices…read more Turn around time was also great!

Laser Cutting Shop

(12 reviews)

Haryn at LCS is super helpful and knowledgeable. I've had her do many projects for me, small-run…read morecrafty projects, also signage and displays for my wedding, and they always turn out just the way I want them. She's skilled with the tech part but also an excellent designer and artist. Highly recommended!

I usually don't write reviews for local shops that I use for my business needs and I really can't…read moreexplain why other than yelp is mostly used as a personal account for me. No one really knows who CW is anyways, but here goes. I have been working with The laser Cutting Shop and the owner Haryn on and off for well over a decade now. It's hard to describe all the projects we have done with them, but I will try to talk in more generalities about a trusted local vendor for us. We have prototyped numerous new product concepts with her shop that needed laser cutting, laser etching and laser marking on all types of materials. Her creativity in solving problems to get what our team needs for prototypes has always made the entire process easier and many times have helped us drive to better solutions based on those prototypes. Every prototyping job we have done with Haryn has been different or had its own unique challenges, but they have always come through. Many times we have pushed the boundaries of what can be prototyped and always been happy with the results. Timelines of course vary with each and every job, but we have never felt like we have been not getting top service with the very fastest possible turnarounds based on our requests. It's difficult to sum up years of working together, but I really can't imagine going anywhere else for this type of work.

Orange County Engraving

(117 reviews)

Customer service dream from first contact to picking up our item...communication was amazing! The…read moreexperience was so awesome I'm thinking about what else me or anyone I know needs something customized (engraved)!!! From the moment we requested engraving on a small area of a putter, we heard no problem...bring it in and we'll do some mockups after we know what you want. Next morning mockups to be approved, once approved the work was done. They quoted a 2-3 day turnaround and delivered in about half that. Day and a half at most. Love when people stick to their word...this place went above and beyond! Will clearly be coming back again soon!

You can't beat service like this. Personal, attentive, consistent…read more You have earned my business for life. As a mixologist, I need custom stencils built to a professional grade since my clients are spread throughout the 90210. I am quite impressed and will let my people know about your work.

OC Laser Engraving

(58 reviews)

Sargon is wonderful and extremely helpful! Fast service, and amazing quality! I would highly…read morerecommend for any size project

I'm so glad I found OC Laser Engraving. From start to finish, the experience was smooth,…read moreprofessional, and easy. I brought in a custom project ( Blue Label Engraved for a 50th Bday) that was really meaningful to me, and Sargon treated it with such care and attention to detail. The final result turned out even better than I imagined -- clean, precise, and absolutely beautiful. They were super responsive, answered all my questions, and made helpful suggestions . It's clear OC Laser Engraving takes real pride in their work, and it shows. Whether you're looking to personalize a gift or need something custom and unique, I can't recommend this place enough. I'll definitely be back for future Big Birthday Engraving.

Tag UR It

(13 reviews)

•$

Tag UR It is extraordinary! Earlier this month, I worked with Catheryn, the owner, on two trophies…read moreI needed for a competition. She understood exactly what I wanted, and the mockups--which she created super fast--were perfect. The trophies were beautiful, and she came in under budget. A wonderful experience from start to finish. I highly recommend this business to anyone who needs to create trophies.

So happy to work with this great local small business! Quick response, personal customer service,…read morepatient with modifications, beautiful product, fast production! Will definitely use them again! Thanks Heidi!

Laser Force