Out standing service and a wonderful understand of urgency! I must of got the best guy in the whole…read morecompany "Eric". Eric knows his business and really has amazing skills. I called at 3:00am, they had a tech call me back and asks a few basic questions but that did not work so Eric came out and had our heat up and running by 6:30am.

From the owner: Farwest Fabricators works from electronic or printed drawings or actual samples to develop and…read moremanufacture parts. An estimator develops a formal quote that accurately assesses the cost of the project. Talented programmers and machine operators are the human connector between the computer and sophisticated machinery on the floor of the plant. We provide sheet metal fabrication, machining, welding, assembly, powder coating and silk screening. We guarantee that all work meets specifications.

Tony is a great guy, shop guys are super helpful and do great work. But the office lady is RUDE as…read morehell. Waste of time to even talk to her. Makes you never want to go back.

From the owner: "We provide sandblasting and powder coating for large industrial projects and agricultural parts to…read morelight residential and backyard enthusiasts. Emails of your project with pictures/drawings, and measurements preferred. renegdepowdercoating@gmail.com"

Horrible company.....if I could give it 0 stars I would...The "Owner" Shawn Dodge is a complete…read morescam artist! He hired my son for summer work on a Government job with prevailing wages for the last week in July and the first two weeks in August. My son was shorted over 14 hours of wages and when Shawn was confronted about it he smugly stated "I don't have to pay you prevailing wages for the drive from Ft. Lewis to Anacortas" which is a lie...also during the several weeks that my son worked for this Company the owner Shawn Dodge regularly used very inappropriate racist remarks when referring to Middle Eastern people, he referred to them as "Sand Ni**ers" and had no respect for minorities !! He is a terrible person and has no integrity what so ever!! I would avoid doing any type of business with this company, shady business practice and very unethical treatment of employees!!

From the owner: Dodge Foam and Coatings has been your roofing specialists in the Yakima area for 32 years. Besides…read morebeing roofing specialist, we also provide insulation. We provide Free Estimates so just give us a call! Industrial and Commercial Spray Applied Roof Coatings For: * Metal * Built Up Asphalt * Single Ply * Torch Down Concrete and Many More Insulation: * Polyurethane Sprayed Foam.

As a female, it's always pretty intimidating for me to go to any car-service business to get work…read moredone. I wanted my rims powdercoated. Sean and Chris took great care of me and they got my rims done within the timeframe they had promised. The rims look great!

From the owner: American Wheel Specialist excels at manufacturing the highest quality OEM and specialty wheels and…read morerims, and a full line of wheels for a variety of industrial, agricultural, and forestry equipment. We provide our customers with a range of high quality finish options including paint and powder coat. Custom Manufacturing: *Wheels to fit row specifications *Wheels to handle heavy load capacity *Wheels to handle the stress of side hills *Wheels that can replace obsolete wheels *Remove and replace parts of wheels (( Armor Performance Coating )) American Wheel Specialist recently acquired Armor Performance Coating and has expanded its capabilities in the realm of powder coating. Powder Coating: With over 6,500 colors available colors and textures and one of the best finish durability ratings, powder coating is an excellent, economical choice for everything from basin corrosion protection to heavy customization. Sandblasting: Save yourself the trouble of hand sanding and stripping rust and old paint from your projects. Sandblasting quickly cleans surface contamination and leaves a profile that's ready for your finish of choice.

I had them do a railing for my office that a customer hit. It turned out identical to the others…read moreand they did a great job. I am now working with Cascade Powder Coating on a sign that I am having made for my business. They have been great to work with and always prompt. I definitely am pleased with the overall experience

We hired Cascade Powder Coating to design and build a steel staircase rail and handrail for the…read moreinterior of our home. It is beautiful, we love it! Josh and his team did everything they said they would and on time. They came out and measured, sent us a design to approve, did a test fit and delivered the railing when they said they would and at a price that was in line with his initial estimate. Josh and his team helped us find the best balance of cost and style/quality. We haven't been so lucky with other vendors for other projects in the area and greatly appreciate the service we got.

So if you want any automotive parts powder-coated, this is not the place. First off, the colors…read morethat I wanted turned out amazing. But those colors were from Prismatipowders.com. I was then quoted $55 per rim and $35 per caliper. They neglected to tell me that I would pay extra for the actual powder coat compound. I was then given a 2-3 week turnaround. And let it begin... First I emailed on week 3 for a status update and they said that the powder I ordered was on back order and that it would take another couple of weeks. That probably would have been more valuable information on the first week, or at least when I placed the order. Six and half weeks later, I get the phone call that they are finished. This is almost seven weeks later, when I was specifically told 2-3 weeks. So I get there to pay and its $130 more expensive because they wanted to charge $60 per rim and $50 per caliper. After negotiating, I ended up paying $70 over the estimate. Now that it's paid for, let me see the product. Like I said, the colors were awesome. But let's start off with the rims. All four rims had fisheye problems and I was asked if I wanted them redone. I just paid nearly $500 and I'm being asked if I want them redone? My first question was, if they had enough powdercoat. They said that they "think" they had enough for all four. Great, there goes another 6+ weeks of waiting. So my response was, redo the worst one and if it fixes the fisheyes, then call me and we can discuss redoing the other three. If not, then I will just take what I got and use some touch up paint. What does he do? They end up doing two at a time and delaying the process. It's now been another 4 days. Now come the calipers. I get home and noticed that they failed to plug the holes for the piston and the holes for the bleeder screws. What does that mean? Oh just an excess amount of powder coat inside the piston sleeves and now the pistons won't go in. Sure I can sand them down, but I just paid $500 and I risk scoring the inside of the sleeves. As far as the bleeder holes, I could have made a sandbox with the amount of sand that came out of the holes. Now begs the question, how much sand is inside the caliper? There was also a blemish on one of the calipers which I have to sand down and touch up. So I then bring the calipers back up to Mid-Columbia powder coat and ask them if they could remove the powder from inside the sleeve. The dude that works in the shop was pretty knowledgeable and he said that he would get it done. So towards the end of the day, I get a phone call stating that they are done. I had already left town and said that I would come by on Monday. He then asks if I would like to meet on Saturday since his son had a lacrosse game at 1030 and I figured why not. I had to go to town anyway, so we decided on a 1015ish meet time. I call around 1025 and he wasn't at the field. He explained that his son's lacrosse game changed from 1030 to 1130. Thanks for the phone call and letting me know. So, I decide to make a few more errands and meet at 1115ish. I waited for 30 minutes and he never called. This is the owner of Mid-Columbia powder coating mind you. After some text messages back and forth, he said that it should have been my responsibility to contact him. I finally got the rims back a week later and they were perfect. I asked one of the workers inside what was the difference between last time and this time and he said that they just took their time the second time around. Are you kidding me. Never again will I use this company for powder coating nor will I recommend it to anyone. Unless you want to deal with the an owner who doesn't know anything about powdercoating, I would venture somewhere else.

We had nearly the exact same experience as David from yesterday's post! I do not want to give…read moreMid-Columbia powder coating even one star. We were told that my son's wheels would be finished in two weeks. They ran into some problems ordering the powder and having to re-do the wheels because they bubbled up. Five weeks later after waiting over seven weeks we have his wheels. They turned out ok. They are very pitted and they failed to paint the center caps like they said they would. The part that was the most irritating was that they did not keep us informed of what was taking so long and they didn't return our numerous phone calls. The day we picked them up they made us feel like we had inconvenienced them with this job. He listened to our complaints and said thanks for the input. No apology! If they would have given us a sincere apology I probably wouldn't be writing this post right now! So frustrated!

Had a project that I needed assistance with so I took it to Allied Steel Fabricators and they were…read moreexceptional from beginning to end. Thy immediately took interest and got me exactly what I needed. Very grateful to have this kind of business in our community!

The guys at Allied Steel (Medal Hangers) produced an amazing piece for me to hang my 6 world majors…read moremarathon medals. It was completely custom job made with my times for each marathon and the dates. Joel and his team sent a pre-production mockup photo for approval and were very quick to communicate during the process. I think these laser cut stainless steel medal holders are undoubtedly the best value for the money and totally made in the USA!