Robeck's has earned the high ratings they get. We had a hospital bed widened about 8 years ago,…read moreand the workmanship is of the highest quality. They know what needs to be done, and they take pride in their workmanship. I recently asked for their help to order new casters for the bed, and Sam guided me through my options (at no charge) so that I would order the appropriate replacements. When the casters arrived, they sent their guy Jimmy to our house to replace the casters on the bed. These guys are extraordinarily generous with their time and expertise. All of the people I have encountered at Robeck's are respectful, ethical, and kind. I can't imagine getting better service anywhere.

I needed a steel shelf built for my work truck, this place had great reviews and they did not…read moredisappoint. Their friendly staff was more than willing to help, came out to my van took measurements for me and made a drawing of what we needed and were more than willing to get it done quickly and skillfully. The shelf was ready in about a day and I got a call that I could pick it up anytime. It was exactly what I needed and I couldn't have been happier. Then a few months later I needed something powder coated i gave them a call, they don't do powder coating but were still super friendly and hooked me up who they use, SRS Industrial Coatings in Santa Clara, and they are just as wonderful! Thanks for everything you are our go to for fabrication needs (I keep coming up with plans so I am sure you'll see us soon!)

We try to text and call but they never follow up and never response. Not good service.read more

I have been looking for a custom patch panel for my '74 K5 Restoration project and was lucky enough…read moreto find Anytime Welding. No other shop or recommended fabricator could make it. It took a week or so to get the 18 ga cold rolled steel in for them to get to work shaping the 72" long custom bent piece. This part/piece is not offered anywhere online, so this was a true "one-off" piece. I gave them my measurements and a small jig I made up showing the exact shape I needed and they nailed it! Great price for what I needed it for. They also offer mobile welding services which I used them for on a trailer. I would definitely recommend them for your welding and fabrication services.

Absolutely first class service. Great design and careful installation. We e used them for three…read moreseparate sets of railings (should have ordered them all the first time) and they all match.

Lam Welding is the Bay Area's best gate designers/builders/installers. They are a family run…read morebusiness that is able to get the job done right. Working with Darin from the quotation stage to the installation stage, the communication and timeliness of the project went smoothly from start to finish. Darin is a next level master gate builder--he puts in the extra effort to ensure the customer is happy. I wanted a design and installation of 2 modern looking commercial gates with an automatic gate opener that could schedule to open and close the gates at specified times. I knew exactly what I wanted and sent Darin some sample gate photos I found online, and he was able to extrapolate from the photos to sketch up a full design. The quoting experience with Darin was much better than 2 other commercial gate installers I had contacted. (Not shown on Yelp or Lam Welding's website, they have an extensive album of sample photos from completed client projects stored on a tablet. The projects are more modern looking, and you can request to view this to get ideas.) Darin first met me at the location and did his measurements, then mocked up the design, and lastly confirmed everything by visiting the site again with our electrician to ensure everyone was on the same page. There were some challenges because the gate location was located on a slope. Darin was able to problem solve, select the gate motors, provide guidance to the electrical installer and also recommend we purchase fire switches to meet the local fire department's requirements. The fabrication of the gate was expertly welded together. Same with the powder coating. The installation of the gate motors was done smoothly, and everything was connected and worked immediately. Darin, Uncle, and Father worked so hard to getting everything installed. Everything just worked. This was the best project experience I've had this year, and I absolutely loved the end result with a perfect look and quality feel to the gates. Thank you Darin and family. I highly recommend Lam Welding to getting a gate designed and installed. They are the best in business.

Been coming here for a while now, both pre-Covid and after. Pre-Covid was OK, but largely hampered…read moreby the conditions of that time period. Since the remodel, it's been absolutely amazing. Great deals on remnant stock for small projects I have, started using it more for work and it's been a great resource in a pinch and save on shipping/material cost. Love coming here and just browsing, always find something new to keep in mind for another project later. Staff service has always been great as well, never had a bad experience with the counter people or people helping in the back. Had one instance where an order was sent to the wrong location, but was handled very well and thankfully it came at a time when it wasn't essential. Just had it shipped to the store and picked up later. No drama. Highly recommend this place if you need something or if you haven't been just to take a look around!

Been here a few times with my buddy but today I went alone because I needed something cut. The…read morestaff asked if I needed help and I told him what I needed. He crunched some numbers, found it it's cheaper for them to cut it for me vs me buying a bigger sheet and spending my own time cutting it to spec. They saved me hours of work for something that may not have turned out as nice as how they cut it. It took about 20 minutes and the gentleman was nice enough to walk out to the parking lot to find me and let me know. I parked in the back and they brought it out to my car. I changed the specs last minute and they accommodated that too. My buddy told me everyone here is helpful and nice and that's 100% the truth! Everyone here is so nice and polite it felt like I was at a resort. Companies like this will be around forever because of staff like this at Industrial Metal Supply.

Quick, friendly service. Parking is terrible. Pricey for a single cut and polish but the job is…read moredone. Had a 12" x 12" x 1/4" steel plate straight cut to 9"

Incredibly helpful, friendly, and efficient. Not too expensive for an individual part to be custom…read moremade, and they had it ready for me within 30 minutes. If you need any piece of metal custom made, even if just one piece is needed, this is the spot to go.

Juan and his team were excellent. I came to them with rough drawings for a really small project for…read moremy kitchen (I needed them to create an exact copy of an existing range hood cover with some custom tweaks and some custom gas range trim kit pieces) and they executed my ideas perfectly, pointing out problems with my designs and also willing to help revise and tweak the final product as well. (I had to make a stainless steel version and then swap to aluminium due to the weight) Throughout, Juan was straightforward and honest with me. Definitely would come to him and his team again for any metalwork I need done!

We hired Yes Welding to design and build a fully custom railing for our deck, and the result…read morehonestly exceeded our expectations. This wasn't just a railing, it feels like a piece of modern art. The lines are incredibly clean, the welds are flawless, and the whole structure feels rock solid and beautifully finished. You can tell right away that this is true craftsmanship, not off-the-shelf fabrication. The owner has a real artistic eye and helped us design something totally custom that fits the space perfectly. He paid attention to every little detail and treated the project like it was his own home. Super professional, communicative, and just a genuinely great guy to work with. Quality like this doesn't come cheap, but when you want something done right and built to last, it's 100% worth it. If you want master-level metal work, Yes Welding is the place to go. Highly recommend.