Great customer service. Staff is very helpful. Only problem is they need more items in stock.read more

Well as a someone who has both street and dirt bikes it's so helpful to have a place like Cycle…read moreGear near by - they do have a wide selection parts and gear that is typically needed but because of the partnership with Revzilla you can get just about anything sent there right away such as new tires which they will mount for next to nothing if you bought from them or Revzilla - the employees are universally friendly and helpful and they ride as well and take interest in you being taken care of . Not always the case in many New Orleans Shops

Store manager and staff were really helpful with a tire replacement for my dual sport bike.read more

The absolute BEST customer service!! We went to MBHD and were completely ignored by 6 employees,…read moreleft and came around the corner to Cycle Gear where Calvin went above and beyond to fit our whole family for new helmets. The entire staff at Cycle Gear was attentive, helpful and extremely knowledgeable. We will definitely be repeat customers! 10 out of 10.

My husband and I will always stop at any Harley-Davidson that is convenient and is easily…read moreaccessible from the highway. I won't drive in circles and I don't like going back the way I came to visit a shop. Especially on a road trip. So if a shop ticks all the convenience factors, we're gonna go in. Hubs likes the graphic tees and I get the poker chips. I'm up to 40 (ish) . This shop is about 1.5 blocks from I-10. And wasn't terrible. I got my poker chip and headed off to Florida.

I was very pleased with all who helped me with purchasing my new 2023 FXST Harley Davidson Thanks…read moreto everyone for the help I do love my new Bike Special thanks go out to Faye and Randy for making it happen Thank You Gulf Coast Harley Davidson Biloxi Jerry Peach

The Flaming Dogs were pretty good, I ordered 3 medium well, but they came out well done. The…read moreBrussel Sprouts and Sesame Cheeseballs are always a crowd pleasure. Alan sure puts on a great BBQ!

Not only does Cajun Maddogs have the best prices, their customer service is excellent. Bike and…read morepaper work came ahead of time delivery was promised. Had a minor problem with the bike as it came without mirrors. The bike is shipped in a crate from China to the dealer and then onto customer. So they had no idea mirrors were missing. One phone call and problem was solved and mirrors were shipped and they apologized even though it really wasn't their fault. Thanks, Bill Botts

The parts and service people really took care of my son and I. We just came off of a 6 state 1500…read moremile "Father and Son Harley Ride" ending at the New Orleans Harley Davidson dealership. Brent from the service department really took care of us. I would recommend these guys to anyone that rides a Harley. They are truly stand up guys!!! Randy and Nicholas Hix. 2023 Father and Son Harley Road Trip

I took the Basic Motorcycle Rider's Course with John and Peter (instructors) at this…read moreHarley-Davidson location, and I had a fantastic experience (even though I failed!). Don't let the fear of failure discourage you from taking this course because there is much to gain regardless! Also, don't be intimidated by the Harley-Davidson brand; the staff are all super friendly and helpful!! The beginner's course is about $100 on weekdays and $200 on weekends. They're both 3-day courses (nearly all day each day) with day 1 in the classroom, day 2 on the range with hands-on practical skills training, and the last day reserved for the exams (written and practical skills). The time commitment is real, but it's very much worth it. If you pass the class, you will receive a certificate which will allow you to bypass the skills portion of the test at the DMV when you're seeking licensing. It also grants you discounts with your bike insurance! As someone who has never ridden a motorcycle (or even a dirt bike!), I had a lot to learn through this course. It's taught exactly for people like me with absolutely zero knowledge or experience with motorcycles. The instructor will go through every part of the handbook with you and clarify anything you may not understand. The handbook covers motorcycle operation, road safety, proper attire, and much more. Even if you are an experienced rider, I highly recommend taking this course anyway. You will absolutely benefit by learning new statistics, fine-tuning your riding skills, and gaining potentially new information about road safety and the specific kinds of awareness you should have as a bike rider. I have been driving a car for years, but I learned that the extra mindfulness you need to safely ride a motorcycle was on another level. Even while driving a car, I feel as though I have benefitted from the lessons. The instructors are thorough, friendly, and caring. However, that doesn't mean you'll breeze through it (especially if you're a new rider). They will spend extra time with you if needed, as time allows, but they need to stay on schedule for the sake of other students. I found the second day of hands-on learning to be challenging. As mentioned, I have no experience on a motorcycle at all. Plus, I am short in stature, which may have been a disadvantage, if not physically, at least for my confidence. I made it through about 80% of the practical lessons before I hit my plateau and couldn't keep up with the advancement in skills. At that point, I couldn't meet the objectives to move on to the next lesson, so I failed this course, but I do not regret taking this class at all. This was a perfect introduction to motorcycles and I know I need more practice. I plan to take it again a second time, and I feel I could probably pass next time! One thing to note, they never push you to buy their products while taking this course at all, so zero pressure to buy anything if you're not interested!

Terrible customer service,lousy mechanics. I brought two harleys to be repaired. One took five…read moremonths to get the parts that I paid for up front and was never repaired, the other the workmanship was so shabby that when I got my bike it did not run. after several days I was able to get the engine to run the bike only made it One mile before the engine quit. I took the engine to another shop to have it looked at. Seals were missing or in wrong, one head gasket was installed backwards, etc.it is now going to cost me more to repair the damage done by this shop than what I wanted to do in the first place. All you have to do is go by this shop and see the filth and trash laying around than go up the street to the next shop and it won't take much to decide who should work on you bike.

From the owner: Motorcycle Service and Repair Motorcycle Parts and…read moreAccessories Motorcycle Apparel Motorcycle Sales

This place. I had…read moremy doubts; small shop with no reviews and in a old/rundown building. Looks can be deceiving so never judge a book by its cover! I met the two guys who work there, Roger and Ryan (or is it Bryan?). I ride a 2003 Harley 1200 Custom. Anyways, I had an issue with my exhaust head studs and exhaust gaskets. For some reason when I had taken off my pipes, the flange nuts wouldn't go back on or they'd get loose real quick. Also had a problem with my front caliper, it would seize and the pistons inside it wouldnt work regardless of a rebuild kit. I usually do my own maintenance but I couldn't fix the problem due to the complexity of the job, plus I didn't have the time. If I would have went to the Harley dealership, they'd tell me i'd have to get Brembo brakes and that'd cost me a great deal as well as fixing my exhaust/pipe problem would cost me another ridiculous amount. Overall, with the front caliper and the exhaust/gasket problem, I paid $280. Sounds a lot but all the other places that would give me a quote was a lot higher. Plus, i got a new brake-line and had my Carburetor checked out just in case there was any problems.

I agree with what Matt G. wrote. I had a vibration in my…read more2001 Road Glide that no one else could diagnose. The "national brand" shop said they did not have a clue what was wrong and thought it could be an alignment issue but they don't have the equipment to check it. Another local shop of some reputation just said "its not too bad so just ride it until it breaks and then we will know what to fix." I found CCC pretty much by accident online, and went there to talk to them. Roger was very helpful and sure they could fix it. I took it in, and Bryan and I talked a while about what it was doing. I left it with him and it was fixed the next day. I am so glad to have my bike back running well. I won't go into detail about what the problem was but Bryan found it and fixed it when two other prominent shops would not even take it in and try. I have another Harley with an electrical problem and it is going to CCC on Monday.

Mt-07, tire replacement, quick and easy. Owner is super…read moreswell guy and i love his dog too

I discovered Mattei's Cycle Supply through a series of referrals from other shops. I needed some…read morework on a set of vintage carbs and all fingers in town pointed to Brad for the expertise. I had no idea the gold mine of experience, skill, knowledge and helpfulness that I was about to encounter! Brad's specialty is drag racing bikes, specifically the Suzuki, Hayabusa. He can do most anything needed on any bike but drag racing bikes are his forte. Mattei Cycle Supply is the kind of shop that any customer wants to walk into. Brad is accessible, friendly and knowledgeable. His shop is so meticulous I'm certain you could eat off of any surface in there. His work is equally meticulous. He personally does all the work that comes into the shop. I will never take my motorcycles any where else. A good mechanic is hard to find, Brad is simply amazing! His cheerful demeanor and expansive knowledge make him my go-to person for all things motorcycle. Brad is busy, so always call if you intend on dropping a bike off for repair. He is always happy to work on parts that have already been pulled.

Dave and his crew have been our EXCLUSIVE scooter repair team for a VERY LONG TIME!! Dave has been…read morefixing our scooters since before Katrina, and is the ONLY PLACE will take our scooters for repair and upkeep. Their prices are reasonable, their reliability stellar and their knowledge of keeping a scooter running is unmatched, in my opinion. If you own a scooter you need to get to know FX. You will eventually thank me!

Buyer beware With FX…read morerecommended by Moto Julia for working on older BMWs, I bought what I thought to be a good deal from a good mechanic. I believed I was purchasing the exact bike I had been searching for; turned out to be quite the project bike I didn't really want. I currently kind of feel stuck with a money pit of a motorcycle that Dave said was good, ready to go, and he would ride across the country as is... I soon learned to consider it unsafe in the condition it was and have found multiple roadside stranding type issues since purchasing. It has been stranded in my driveway more than once with, intially, an officially tested bad, failed battery and then a completely worn out starter motor. I was able to get it running again for a few hundred dollars in replacement parts, and a lot of work on my part. These are not the only problems I have been finding but the only ones that left the bike unable to start at all. I am hopefully only looking at around $2k to get it to where I think I can ride it to British Columbia and back, like I did on one of my former older in far from perfect type of shape BMW bikes. The point is I'm having to work and spend $ on this bike a lot more than I'm riding it when I was told it was good to go as is... Be very careful and know what you are doing or bring someone who does. I'm uncovering more and more issues with and cheap parts installed in this bike as I get work on the other potential problems, that I had voiced concerns about when I was buying it (that Dave said were normal charateristics for this type of motorcycle to have). #1 was slack in drivetrain - which may or may not need serious repair - some owners online have said they have lived with "the drive clunk" for many miles on their R1150 models - others have rebuilt shaft, bearings, and splines throughout the drivetrain to remedy, = $$$ Beware of vehicle purchases without clear mechanical certainty of what you are buying. Be thorough and don't let your excitement get the better of your judgement. Really inspect every detail when purchasing from here and don't take their word for it just because they are mechanics. I do like the bike and believe I can eventually fix all its issues I'm discovering but I probably won't be using Fx to do any more of the work on it. The repairs I did have done there were grossly underestimated, and I was charged 12hrs at $119.00/hr instead of the quoted 4-6hrs. Otherwise, Dave is very friendly and helpful, as is the woman working the front desk. Going by other reviews, maybe they are better with the scooters but I don't advise going there for BMW repairs/service.

I had a stellar experience at incorrigible motors when it came to the repair of my 2016 ram 1500. I…read morehad previously gone to a different mechanic to have something looked at, and they were unable to figure out what the issue is even though it was obvious. I decided to go over to incorrigible instead, and Matt was very thorough with his inspection as well as his explanation of the issues with my truck. He was able to order a new CV joint and he received the new parts very fast and he worked on my truck right away. The level of communication as well as professionalism was astounding and I highly recommend this mechanic to anyone with motor vehicle needs.

Matt and Kevin are absolutely great. They are helpful for finding what I was looking for (a gift…read morefor a Jeeper friend) and provide a friendly and welcoming atmosphere to all! The "Janky" car as they call it is always an interesting topic and they are well versed in all things racing. Highly recommend this place!