So I have used Spiegler several times in the past, always had great results with no issues, I got…read morethe set in I ordered for the front of my restoration and the line length's were not quite correct. I called Customer Service and after a little discussion he said that their measurements for that bike might not have been totally correct. he requested that I provide measurements for the lines which I did, new lines were custom made and sent out same day. they are perfect. little issues are always going to come up, the point is how are they handled. These guys are flawless in their service !!

Disappointed I…read morepreviously purchased a Spielgler line and was impressed at the ease with which the banjo fittings could be adjusted with the included tool. I recently purchased three more Spiegler line segments; unfortunately, the quality did not appear to be at the same level. * One of the three segments was too short by more than an inch (required dropping the forks and creative rerouting to get it to fit - not really a viable longer term solution). * All 6 banjo fittings appeared to be over-crimped - I could not get them to adjust using the supplied tool Two of the three lines were returned to Spiegler for testing. I found the communication with Spiegler to be: * Slow. They consistently missed their own, self-imposed deadlines by a factor of 2 * Terse * Incomplete (never did address the "too short" issue) They returned the lines indicating there was nothing wrong. They also produced a video in which they indicated their ability to rotate the fittings. Unfortunately, I was unable to duplicate their results with the tools they provided me. I still can not get the fittings to turn even after pressing the provided tool in a vise so hard it began to deform and, on another occasion, wrapping the fitting in electrical tape to provide additional clamping pressure within the tool. I was not present during Spiegler's testing so I can not comment on anything other than the fact I can not duplicate their results. I will say that it appears to me that no one involved seems to care. I took videos of some of some of the tests I conducted and I will try to include them with in this review. Failing that, I can share them upon an appropriate request. It should be noted that because of the angled fittings Spiegler used, the inability of the fittings to rotate utilizing the provided tool and the lines' lengths, the lines sold can not be used for their stated purpose. Instead, I purchased a set of stainless braided PTFE lines from eBay of a sufficient length and with fitting angles to accommodate the fact these fittings do not rotate (Note: these lines are sold with the notion the fittings do not rotate). I did not receive, nor did I expect, any substantive customer service from the eBay supplier. I received all of this for about $150 less than the, heretofore unusable, Spiegler product.

So my car was backed into put some pretty drastic scratches on the bumper I dropped it off and…read moreMonday and picked it up Thursday as promised and the job looks fabulous!!! Thanks Jamie and crew I'm very happy with the results!

BE WARNED!!!!..OWNER will promise you the world, and deliver none..4 months turned into nine.just…read morestraight up lies..absolutely due your research prior to choosing SHARP AUTO.

I had a lot of complicated issues with my sonic. It wasn't cheap, but I was thinking about getting…read morerid of it. Now it runs fine and it's definitely cheaper than a new car.

have had two very bad experiences here. I know. shame on me. first on a Honda xr250. he "rebuilt"…read morethe top end for 1000$. got less than maybe 30 hours out of it and never started again. was told no compression by another mechanic. had to sell for parts. Now on A KTM dirt bike he charged me 950$ to rebuild the carb. It was end of season so I never put any miles on it. put in storage. tried to start it up for this season and wouldn't start. took it back and he charged me 500$ to clean out the carb HE rebuilt and replace "bad gas" that HE put in. Didn't make any offer of discount. told me I didn't run it enough! I don't know if he's qualified or not but I got a really bad deal and could never recommend him to anyone. maybe BBB should know.

Justin and his team is amazing!! Extremely helpful shop, don't over sell. They want the best for…read moreyou and your ride.

Consistently helpful, friendly and knowledgeable! Had our bikes expertly tuned up in Spring. We…read morealso recently purchased a kid's bike at Walmart and took it to them to have it checked out. They found brake issues which they fixed and added a quality set of training wheels The techs are always ready to provide good advice -- we really trust them. Thanks so much!

This is the best bike shop in Southern Ohio, if not the entire state. Roger is knowledgeable and…read moredoes the best work. Look no further than International Pro for all your biking needs. Steve Dankof Dayton

IPBS is the best bike shop in this area...by a mile! Roger has so much experience and takes his…read moretime with each customer to make sure the bike ergonomics are just right. If you are looking for a long term relationship with a bike shop/amazing mechanic...look no further. Roger is the best!!!

Tommy is a great guy! He is a down to earth owner who is always upfront with pricing and time…read moreframes. Everything I've ever had done at his shop has turned out GREAT! Everything he powder coats looks beautiful.

From the owner: Our Business Specializes in all custom Metal Work & Automotive Repair & Rehabilitation…read more We offer All CUSTOM Work: * Motor swaps or repairs * Transmission swap or repairs * Suspension replacement * Diagnostics Reading, Repairing, & Clearing * Chassis, Frame & Panel (Re-) Construction * Lift Kits/ Air Ride * Tube Bending & Sheet Metal Forming * Powder Coating: Rims, Motorcycle/ATV * Plasma Services: Headache Racks, Bumpers * Exhausts * Roll cages * Decals