Excellent-Top Shelf Business! Luis combined 2 trailer hitches into an RV spare tire holder…read more Brilliant. Fair price and instant service. Definitely, give Welding Partners a try!

Amazing job done! I just needed a rail constructed and installed for a new porch. Welding Partners…read morecame out immediately and gave a very fair and reasonable quote. Within a short time the beautiful, sturdy rail was completed and installed. I highly recommend Luis for excellent workmanship and professional service.

Jorge was great at assisting my needs, he was able to take care of me asap as I needed a part to be…read morefixed immediately. He did great work and had it ready for me when I needed it. Very professional, service was great, price was reasonable and was very happy with how it turned out.

I needed some spot weld work done for a couple of BBQ brackets. This was too small of a job for…read moreother shops but Alex was willing to do the work. He did a great job at a great price & made a much stronger welds than the original ones. I'm sure these brackets will never break again. He did quick, clean work. I dropped it off on Friday & picked it up the following Monday morning. I would definitely use JM Welding services in the future for any welding work, big or small.

He's the guy to go to 1000% Awesome work and cool guy to work with. Definitely will recommend him…read moreto anyone I know. Best turnaround time as well.

So my second time here and this guy never sease to amaze me .I broke the weld on my aluminum boat…read more Came here and back on the water in less than 1 hour

Sergio did our exterior stairs. It was a very detailed job and needed to be done according to the…read morespecs while maintaining a nice, clean look. Sergio and his team were easy to work with, accommodating and willing to provide options that put us at ease, and done with quality, on-time, and within the budget. Sergio takes pride in his work and is passionate about welding and customer service. Highly recommend!

I called Javier for an estimate, not only did he actually answer the call, but came the next day…read morefor the estimate. I got the estimate the next day along with a mock up of what the railings would look like for our steps. 3 weeks later they were fabricated, installed and look beautiful. Professional, friendly and communicates with you. Highly recommend !

Been going here for the past couple years. I have had them resurface many flywheels and rebuild…read moreseveral Honda cylinder heads. They do good work but turnaround time can be slow.

I've used L&O a couple of times, with great results. They decked and did a valve job on my Honda…read morecylinder head. Did a great job, and the cost was very reasonable. knowledgeable staff.

I have been going to Jan and Deily for the past year and a half, for various company projects, as…read morewell as my side-projects for my house and cars. So it has been due time for me to write a review for him. Before I do, I have to say it is funny to read other reviews on Yelp, like the one about pressing car bushings (which truly not even specialized car shops would do). I have to go back to Jan for that, because I did not know he did such things. I had given up on replacing bushings on my car, after being turned down by so many local auto shops and mechanics. Now for that reviewer that rated them badly for a four week lead time... what sort of expectation was that? A poorly-run machine shop has downtime to let anyone cut in. By all means go to those shops instead or pay an arm and a leg, if that is the expectation... however, Optima Precision operates like all properly run, established machine shops do... schedule your work into their operation or work an expedite out with Jan and Deily... We are even lucky they are open to our side-projects. Bottom line, talk it out with them. They are very open to making things happen! Anyways, just to give a little background, I formerly worked as a design engineer for Zodiac Aerospace's oxygen system division, that made a lot of pneumatic components such as valves and manifolds. I can certainly attest that Jan and Optima Precision has the expertise and capabilities to machine top-notch quality parts. Whether you are dealing with extruded, cold-pressed, tempered aluminum, steel or etc., or softer brittle plastics like plexiglass or acrylic, up to something like 6 feet by 4 feet (double check with him), he and his crew can take care of that. I originally went to Optima Precision because Jan and Deily were the more responsive, local machine shop. They are very approachable and easy to communicate with (their English is solid). Most importantly, their pricing and lead times were very competitive, compared to the other shops in the area. Easiest way to describe them is that they are flexible and understanding like the old machinists but they operate with the newer CNC mills (even though they have Bridgeports off to the side). In other words, they are not like other new machinists that refuse small orders and cannot think other than what their CNC machine tells them they can or cannot do. What do I mean by an old machinist? Jan did not just go off my engineering drawings, but he verified my design intent to make sure my parts would fit and functioned well in my application. He was more concerned with what I wanted my part to turn out as, rather than what his machines could or could not do. To affirm other reviews, Jan and Deily are truly open to make small quantities (even one or two pieces like other reviews stated) and, of course, scaling to large production quantities. If you have worked with machine shops enough, you would understand that Optima Precision is a no brainer to have your parts, at least, quoted there each time. Long review, but hope that helps you all when considering!

I approached Optima Precision to machine 2 simple holes in an automotive part. I explained exactly…read morewhat needed to happen and what the part was for. I mentioned I was not in a hurry and could leave it for the weekend. Before I could finish explaining and before price was even discussed I was interrupted and told the wait would be 4 weeks. To machine 2 holes? Shouldn't take a competent machinist more than 10 minutes. No thanks. I dropped the part off at another machine shop and had it back minutes later machined perfectly to specification.

Always helpful, knowledgeable about the equipment (obviously), but they will take the time and…read morepatience with folks that are not the most comfortable getting into something new. That speaks volumes to me even though it may cause me to stand around waiting longer... i appreciate it, anyway.

TLDR, The big lazy guy rolling around in an office chair instead of walking, doesn't know what he's…read moretalking about and is extremely condescending... doesn't seem to care. Consider somewhere else. I called a few places the day before inquiring about a single axel tilt bed equipment trailer. I had a couple local options that had similar prices and a trailer in stock, but my family and I have rented from Cresco a handful of times over the years so I decided to go with them first. I recognized the voice on the phone and have worked with him before, a very nice and helpful gentleman. He told me they only have a single axel in stock which was capped at 4K lbs. No problem, this isn't the first time I've rented a trailer for this purpose, so I knew that with the battery conversion, my lifts gross weight is just around 2,800.. with a typical single axel tilt trailer, around a combined 3,400lbs. So, I make plans to pick up the trailer in the morning. I show up at 8am inquiring about the trailer and unfortunately the guy on the phone isn't there. The two guys in the front office ask me about the model lift I have and what the lift height was. Knowing these guys won't know my lift because it's an older rare brand, I respond "it's a standard size 3k gross pound scissor lift", and the guy sitting in the chair asks again, rudely, "what's the MODEL of the lift". I get it, height generally dictates the weight, but this isn't always the case. So I give it to him and it clearly doesn't register. The other guy heads out to check out my car, while the other larger fella who can't be bothered to stand up, interrogates me more while he rolls about on his office chair. "No, you're going to need a dual axel...". I explain that's not correct, their 4k cap trailer will be fine because I'm well under 3,000 lbs and the right size. The other guy comes back in and tells the lazy fella that I have a "4x4 Crosstrek", prompting the big guy to say, "you need a 1/2 ton truck, you can't tow with that". I don't know where this guy gets off thinking he knows what cars can tow what.. but my Crosstrek is rated for 3,500 lbs, manufacturer specifications. Meaning, not only can I tow this trailer fine, but I can even tow it loaded with my lift, if I wanted. I explain to the lazy big guy, "I'm just picking this up now and will be hooking it up to my truck when I get back..." he cuts me off and says, "doesn't matter, your car can't handle the weight, we're responsible if you crash, it has to be a 1/2 ton truck or larger, that trailer has surge breaks". First, BS.. these guys bare no responsibility for any crashes I cause and their contract and insurance waiver makes sure of it. Second, I of course don't expect them to break their rules, but the fine print in their terms specifies tow capacity, not the size of your truck. So I ask him calmly, "where does it say '1/2 ton' and not weight cap", he cuts me off again "doesn't matter, your brakes can't handle the trailer, the trailer has SURGE brakes.. do you get that, it has SURGE brakes.. your car doesn't have the power to stop it", I asked him to please not talk to me like I was stupid. The problem is, this lazy bumpkin doesn't understand that my car is much more capable stopping with its 4 wheel oversized disk brakes than most peoples 3/4 ton pickups which have weak drum brakes on the back. Again, I'm only towing an EMPTY, 1300lb tilt trailer with my very capable "4x4" Crosstrek. I don't even owe it to them to tell them what I'm towing, since I'm fully responsible. He repeats, "you need a 1/2 ton..". It was clear this wasn't a discussion, just wasted time in a condescending tone. I finally had enough of this guys rude attitude. I've debated him because he is wrong, but I've been polite up until now. His ignorance is messing with my plans and he's being extremely offensive with the way he's talking to me. So I throw it back. "You know what, ufck you guys. you're making things up and you're being extremely rude and talking to me like I'm stupid." As I walk out to take my business elsewhere, I turn around at the door, look straight at the big guy, still rolling around instead of walking, and repeat, "you are a very rude person". This is where I make a promise to myself to leave them a review. He responds, "good... good.. .. I LOVE it!".... What a prick! Well I hope you love this review too. This guy has literally been here since the age of time, quite possibly the manager.. he clearly doesn't care anymore. I leave and call their local competition. Same trailer capacity, same price. I show up, hook it up and head out without the grief given to me by Cresco. It only threw off my schedule by 2 hours, all because of this extremely rude, complacent, lazy old fart that thinks he's smarter than his customers. Never again, and I'll make an extended effort to discourage anyone I know from renting here. Every single customer turned away by this is well earned.

Ed at PMS Solutions responded the next business day to my request for…read morequotation, and I received the quotation the subsequent business day. The lead time was approximately two weeks. This was a small, simple job of nine parts fabricated from 6" by 1" aluminum bar stock. A few holes drilled, some threaded, and a couple of milled slots. I was well pleased when I picked up the parts. They were gorgeous! After testing the fit, Ed arranged for the parts to be anodized, which was turned around in a day. I recommend Professional Machining Solutions, and will definitely use them again when the need arises.

Eduardo the owner is great to work with. He is a hard working and honest business man. His main…read moregoal is to build long lasting relationships with all his clients. I highly recommend his company for any manufacturing needs you may have.