Bob is awesome! I needed a custom mounting plate for my winch and Bob made it in less than an hour…read more Amazing! I highly recommend Elco for any custom fabrication needs.

Phoned in the morning to ask about a small aluminum bracket repair. Said he could do it and to come…read moreby. Had a great chat with him while he looked at the piece and made suggestions. He had the whole thing done in a few hours (earlier than he said) and for very affordable price. 12/10!

I had Jon create a metal words-on-metal art piece for a gift about 2 years ago. He did a decent…read morejob...albiet quite gruff during our transactions. Today, I reached out to him with a top-line design of a piece I wanted fabricated . Jon answered the phone and was short, unkind and really mean, in fact he was downright rude. He told me to text him my design which I did. About two-hours later I recieved a rude text telling me he was "Passing due to too many details and that the piece would cost $1500". Ironically - $1500 is what I expected to pay. So, he tells me he's passing THEN says it'll cost $1500? Which is it Jon? Neeedless to say, I found another metal fabricator within an hour and the owner was absolutly a joy to talk to. He responded that he loved my design and would be able to fabricate it for about $500.00. So... in all honesty, if you are looking for simple words on a slab of metal and a horrible attitude - Jon may be your guy. If you are looking for someone who is collabrative, kind in execution, positive spirit, thinks out of the box - you might be better served not using tVenice Metal Worxx. Frankly, I have a really bad taste in my mouth and was quite saddened by the experience. I do NOT recommend!

**EDIT 10/24: He called my personal cell after reading this to aggressively call me an idiot and to…read more"Fuck off". I asked if it was inaccurate and he hung up, consistent with original review. AVOID this unhinged man** Called for a quote for a simple metal box with the exact dimensions, he said I had to "do my homework" asking about custom slots even though I told him I just needed the box. Oddly rude and hung up on me, call lasted less than 2 minutes and it was too much for his patience. Would not recommend.

Great communication and I drew the specification, and he got it perfectly. Great price!!!!read more

We had the good fortune to use Santini Ironworks to replace the lower section of our entry stairs…read more Not only did they complete the installation in a timely manner, but the work was beyond anything we could have hoped for. I cannot recommend them more highly. And we so appreciate them. Ron Rosenblatt

These guys are amazing! I took a head in with a burnt valve and a header in to get welded, they…read moretook the time to answer all my questions and not only got the work done in record time but also below estimate.

I had my heads rebuilt here. 318 small block. I upgraded my engine with a larger Comp Cam. They…read morewere able to research and get the correct new springs for the heads. Great job. Reliable and very nice customer service.

I got in touch with them in regards to a custom project not really knowing what I needed…read more They could've taken the project and made a lot of money off of me but instead they were very honest and pointed me in the right direction. Very thankful for people and companies like this!

The railing that he made in our home was beautiful! Very kind and easy to work with. 10/10 would…read morerecommend Jeremy!

These days, I rarely come across old school professionals that are courteous, do a great job, AND…read moreprice their work reasonably. I have given this shop multiple jobs over many years, and have been very satisfied every time. I work in the Aerospace business, so when it comes to machine shop quality, I know what I am talking about.

I could not believe the ridiculously rude behavior of Dave (owner of Rich Sheet Metal Works). When…read moreI arrived there was one other worker besides Dave doing ABSOLUTELY NOTHING. Literally there were no customers in the shop and they were not working/fabricating ANYTHING. My intent in going there was to gather ideas / put a game plan together for fabricating and welding a steel rod piece that I needed for some furniture. Then after discussing what needed to be done, it was my intent to hire them to weld my parts together. DAVE was very curt and rude. Every time I opened my mouth to speak he cut me off shouting "IT DOESN'T MATTER, it doesn't matter!!". I felt like I was being scolded and I've just walked in to the place. Literally, he would not even let me show him a picture of the product or finish my sentences. He acted like he couldn't be bothered with such a trivial request and was highly annoyed that I would have the audacity to take time out of his day to try and research my project by speaking to welders more experienced in fabrication than I am. I might understand his protestations if they were really busy (there's just no justification) however they were just standing around doing nothing! I guess I interrupted Dave from taking out a box of opened envelopes to the trash which is the only thing he was doing when I tried to greet him. He was rude and irritated from the second I said hello with a smile. I cannot believe the attitude of some business owners who act like they're doing you a favor by letting you come to their place of business to procure work for them. He just did not want to be bothered and spouted off something to the effect of "I can't fabricate this part because it's proprietary!!!".... Huh....? What on earth are you even talking about??? The piece is not proprietary, it's basically a brass stud. I found one that works perfectly on Amazon for $7. Then he started whining about he doesn't have a hollow steel rod and couldn't fabricate one and that even if he could fabricate one it would be the wrong color blah blah blah....not even letting me finish my sentence to TELL HIM that I ALEADY HAD the steel rod in the right color (also purchased on amazon for $9.89)!!! All I was trying to do was hire a "welder" which incidentally Dave is...to weld the two parts (I ALREADY HAD) together. I would've gladly paid for the time spent as the materials were already purchased and in the mail. I couldn't relate ANY OF THIS to him because he wouldn't let me speak. He just kept barking over me until literally I was so disgusted I walked out. I went to several welders that day and told them the story of my interaction with Dave. They all said the same thing..."I've heard he's a capable welder but very hard to work with." Amen to that... I urge potential customers to go ANYWHERE but here. You know you're in the wrong place when you come to a place of business and the first thing you get is a crusty scowl instead of a smile and a hearty "how can I help?".

Paul is talented at his craft. I called him explaining that our gate latch rusted off and we needed…read moresomeone to provide us with a welding solution and then texted him photos. 1 week later he came by and fixed it in a few hours. Good as new and reasonably priced.

Pauls welding were on time and friendly when they came to my home to fix my broken gates in the…read morebackyard. I called quickly to book an appointment with them and they responded very quickly. I got a fast quote over the phone and saved money. Thank you Pauls welding in Santa Monica for the services! Excellent work today. I'm happy with my gates and the work your staff put in!

Had to have some tabs re-welded on my beast of a skid plate on my 02 Tacoma and wasn't sure where…read moreto take it. Found Towers very close to me and what a gem of a shop! Found out the job was not a problem and that they can do just about anything with metal. They got me in quickly and all the guys pitched in to get in done right at a very reasonable price! Great group of guys that know what they are doing. Highly recommended and off-roader friendly.

THIS IS YOUR GO-2 METAL SHOP!!!…read more I searched around a bunch of places and called around - and found Towers Metalworks!!! And I am glad I found Doug and his team. We are doing some big renovations at our house and it is all staring with a custom drip pan for our washer and dryer. We needed it pretty quickly and they turned it around in 24 hours. The communication was outstanding and we checked in with each other to make sure the design/measurements were perfect. And I mean their measurements were EXACT!!! Did I mention that they even delivered the drip pan to us! - We don't live far from the shop, though they told me not to worry and they would bring it to the house - who does that? What shop would do that? - THIS SHOP DID!!! :-) We are going to be working with them to do more in the very near future. Thanks again for all the help and work Towers Metalworks - we can't wait to have you do more. Again - if you need fabrication, just call them!

I went in to get a job and they did it and 15 minutes and reasonably priced…read more Plus he's been doing this for about 70 years and knows the stuff

They are helpful and professional. The quality of work is so good and they are fast as well. I had…read moreSimpson ties custom made here and they did a beautiful job. I just took another custom Simpson Tie job to them. I highly recommend them!