I have worked with this company for over 2 years. Love their customer service...flexibility and…read moregreat support! Highly Recommend them!

I have used ABM since I started my Business. Quality Service at a reasonable price. I am very…read morehappy I chose them for my copier needs.

As a busy aircraft parts supplier, our business relies heavily on printers and copiers across…read moremultiple locations nationwide. We were previously using a wide variety of top vendor devices, which led to fragmented costs, multiple billing sources for supplies and service, and an overwhelming number of toner cartridges to manage. On top of that, customer service was lacking, and their monitoring services became more of a challenge than a benefit to us. After reaching out to ECC Technology Services, their team conducted a thorough audit of our setup, consolidated our billing, simplified our supply management, and during the process of replacing all of our output (150+) devices with new Kyocera MFPs and printers, we already noticed the big savings in cost and time from our team. In addition, we are now getting service and supplies seamlessly. They even use a remote management tool that monitors toner levels, meter readings, and device health -- which takes a lot off our plate. We couldn't be happier with the switch to ECC. They're professional, proactive, and incredibly easy to work with. Highly recommend!

Plain and simple: you can count on D'Lan Silvers and ECC Technology. In our business, we need a…read morereliable partner we can refer clients to for printer and document management solutions. Not only are they highly responsive, they always have the customer's needs, budget and timing in mind. We are glad to have such a valuable resource for ourselves and for our IT clients!

This organization was fast and friendly in scanning large scale blue prints for us. It is hidden in…read morea business center in Irvine. We brought our files in and the individual at the front worked on it immediately and we were out of there in record time. We will return for our printing needs.

The best printing company in Irvine. We highly recommend them. They have good customer service and…read moretheir price is beyond reasonable.

Best place get all my stickers there! All promo items and friendly staff. Ask for Steve, Tina!read more

I have been sending large format and specialty print jobs, as well as standard digital prints,…read morespiral binds and stickers, over to Printech for the last year and I could not be happier. I stumbled across them in our own business complex in Huntington Beach, took a quick tour, and was impressed with their capabilities and facilities. They are consistently a low price leader, deliver great quality, have excellent turn around time, and have a thorough knowledge of their capabilities. One of the best print companies I've worked with in 7 years of graphic design. Tina Kramer is an ace on customer service, and their delivery guy, Mike, is always upbeat and in a great mood.

These guys are amazing. I doubt you can come up with a color they can't anodize. Outstanding…read morevariation and quality.

We do a lot of anodizing for our production parts. All colors, types, etc. consistency and…read morecommunication seem to be a common problem in this industry no matter where you go. No different here. Quality: Great at times and very poor at others. Bright dip parts seem to come back pretty good and consistent unless they scrape or scratch your parts. Must be VERY specific where you do not want racking lines otherwise they can have bad marks and other times ok. We just can not afford the inconsistency. Quality control needs to be more on top of it and if there is any question of acceptable finish then they should communicate with the company. Washing afterword was a big issue for us for it seemed 65% there was residue left on the parts when we washed them they looked good but waited a bunch of our time where other anodizing companies we never have that problem. They do wrap and protect the parts for shipping and delivery when complete really well. Customer Service: I work with Stephan and he was upfront, helpful, answered all my questions, usually within a reasonable time frame. The staff all seem helpful and courteous. Service (other): delivery is spotty and not always available. Sometimes you won't get you parts because they only have one driver and he is not going your way for a couple days. Changing a separate environmental fee is very irritating for all the other companies we work with include the charge in their service. With that being said, their prices are high and then the fee is added on top they become the most expensive large tank anodizers.

Wow. These guys know their stuff! Just finished talking to them with my mechanic and we will get…read morenew heads from them. Needed my stock heads ported and rebuilt for the stage 4 we are putting together and discussed the build with them. They actually already have a set of heads in stock for the specific specs we need and we can buy them as a core exchange. Turnaround in a week- which is fantastic for custom work. Plus, they certainly seem to know what they are talking about and that gave me tremendous confidence

If you are a regular guy looking for machine shop / head work services, beware- this place does not…read moregive a hoot about you and has a very low level of ethics. Below is my experience if you'd like to read up on what I went through. And believe me, I am a patient and non-demanding person. The only thing I did wrong here was choose to use them. They are supposed to be one of the best places to have Harley head machining and porting work done, right? Maybe so- great reputation in that regard. But, I'll never know. I brought my heads there about a month ago and asked if they could do three simple things: 1. check valve to valve clearance 2. unshroud the valves 3. enlarge the chamber to hit my target CC once I figured that out I also said I'd pay cash and they have my permission to do whatever is needed, no rush. Ideal customer right? They said sure no problem- I said it would be a week or so until I had the numbers spec'd out so they could do the headwork, again no problem. I left the heads there with them. [Week 1] So I call a week later and talk to John Okeefe, I told him I have the correct numbers and info to have the heads done, explained what I needed (items #1,2,3 above) - he told me he'd also need the camshaft specs. I said I'd email him the info and told him to "do his thing" per his best judgment given the camshaft specs, type of bike, and intended riding. He told me "ok". I sent the info via email right after the call, and then called the next day to check if what I sent was ok. I was told yes all good. [Week 2] I waited a week, and then called to check in . Spoke with John and he told me he was going to do the work on the weekend and they would be ready by the following tues / wed. I passed this info on to my mechanic so he could plan things out time-wise with my bike at the shop. [Week 3] So I called this morning (Wednesday, the 'ready' date), and checked status with John. John told me "oh I forgot- I'm glad you called so I can now remember to do them". wtf. ok, hey it happens right? So I ask him how long he says "maybe I can do it today - but really busy". So I said I'd check with him next week. He says "ok". So I take it that all other jobs are more important than mine, even though I've been waiting. I called my mechanic and told him what's up- no ETA on heads. He said he'd call over there to Branch and see what he can do. I then get a text message from him a bit later telling me to go and pick up the heads / no go. I'm like wtf but I go down there (50 mile drive). I get to Branch and John's not there but some guy "Charlie" is. I said I was there to pick up my heads. He fished around for them (they were stuffed on the back of a desk in a box under a bunch of other "apparently more important" customer boxes.) He slaps my heads down on the desk counter and that's it. No comments, no 'hey thanks but sorry about that', nothing. I picked them up ready to leave and I said simply, "how about an apology for wasting my time". Man the dude turned a shade of red and got all ape-crazy attitude on me- Then has the nerve to tell me "I never told them what I needed done to the heads, so that is why they are not done". From what I can gather, John LIED about it and said he had no idea what was supposed to be done to my heads. And he knew full well what to do, and even gave me a delivery day (today). So this guy Charlie is thinking there is no work to be done because his own guy lied about it, my heads probably would have sat there until the cows come home, and I'm getting attitude from them for complaining. The work order attached to the heads was void of any work info as discussed and confirmed with John twice, and written in an email. In fact, the email I sent with the work instructions was conveniently missing- The only email attached was one that had cam specs and some other tech info John told me would be needed. In short, absolutely worst experience I have ever had with a specialized service provider. I mean the guy John totally blows it and then lies about it to cover his a$$, the service guy is an ego-centric peacock, and they have ZERO regard for anyone's time or hassle. If you deal with them, walk into it with a big expectation that you may have some problems. I have since found out today that this is not new behavior for this place so I'm probably just one of many "little guys" who have come in seeking top quality work and ended up grabbing ankle.

I am so happy with my parking sign for my day spa. The size and color were perfect and the customer…read moreservice was outstanding. I will definitely be using this company for my future printing needs!

I've worked with Ztoone for over 3 years and refuse to go anywhere else. Their customer service is…read morealways on point and their workmanship is consistently done with the upmost quality. Jeremy is a true expert at what he does; he always takes care of me, even saving me money whenever possible. Amazing service, quality work, affordable prices, and FAST turn around - what more could you ask for? They even streamlined the process online so it's super easy to process an order. I highly recommend Ztoone for all your printing needs!

Awesome service I called to get a lower receiver serialized to comply with CA DOJ. After confirming…read morethey could take a walk-in I showed up and worked with Jonathan who was friendly and proud to show me the quality of his work was time to show me his finished product. Their fees were about half the price of what I found online without the shipping costs. Best part is that I was in and out as quick as they could finish. Highly recommended!

Dunham did a decent enough job on the actual plating, no complaints. They told me me the job would…read moretake 2 weeks and it took 5. Inconvenient but not a deal breaker. Price was reasonable. When I received my parts back I had someone else's parts mixed in with mine and some of mine were missing. I returned the incorrect parts but never got my missing parts back. I've had to re-purchase the missing parts (vintage motorcycle) to get them re-plated (somewhere else). Their attitude is that my loss is my problem and that's the cost of doing business with Dunham. Buyer beware with these folks.