I called this company at 8 am after my van showed check engine light and ran rough as I drove from…read moreCentral Massachusetts to Annapolis Md. I was driving at night, got off exit at 2am and had to sleep in my van in 0 degree temperatures. Chris invited me to come to his shop and let me jump to the front of the line on his very busy day. I was in by 8:10 am. He got my van diagnosed, parts delivered and I was back on the road after lunchtime. I am so grateful to him to help me get back on the road. I am a dog/house sitter and I was expected in Annapolis that night. The homeowner had already left the country for a trip. Chris and his team were not only professional but generous in their efforts to help me. I was told where I could get lunch and I was able to sit in his waiting area for hours, have bathroom access and even had a fireplace turned on because I was cold. His office manager was so gracious and helpful to me. Thank you Chris and his team: wonderful people.

Great service. Despite busy schedule, Chris explained they'd fit me in as soon as possible. Easy…read morecheck-in, including helping me to get a rental car. Call next morning to explain diagnosis and had vehicle repaired that same morning. Repair cost was reasonable. All of the staff I spoke to were friendly and helpful.

brought my vehicle to Dave for a lift in my truck he did a great job. The price was reasonable. I…read morewould recommend.

Very slow to take care of paying customers. I was disappointed that he was pushing off work on my…read morecar for so long.

I found SafeT Auto when looking for a place that used Snap Finance…read more I was impressed by the number of stars and good reviews that others had given so I called them. Neil was so sincere, honest and knowledgeable when talking to me about the many repairs my can needed. He organized and guided me with the order of importance to make sure I had a safe vehicle to drive! As a woman, its very easy to be taken advantage of however,I never once felt that he was trying to "get over on me" and just take my money! I genuinely felt that he really cared about my safety and keeping my vehicle running well! I will recommend SafeT Auto in Wallingford to everyone and will keep coming back!

The receptionist Neil is very courteous and provides detail explanations. This was my second…read moreappointment with Saf T Auto Wallingford. My first delt with a repair in relation to a loud noise from what I was explained was a bearing issue in the rear. Along with a new alignment and other services, the repairs were made at a very high cost. There was no noice and the car was in good shape. In a few months, the same exact noise returned. I returned it to Saf T Auto only to discover that the caliper was "frozen" and I needed more repairs that would cost $1,300 +. It was explained that the bearing was not the issue this time around. It was the caliper. I decided that alone should be fixed because I simply could not afford to pay the larger cost. I was assured the caliper replacement would fix the issue with the noise. After the repairs, I picked up my vehicle and drove off and immediately my alert AWD light came on. I returned back to the Saf T Auto where they fixed the alert light. After traveling less than two minutes, the same exact noise that was the issue to begin with returned. I contacted Neil. He said that the bearings will have to be changed after all. I refused to pay for additional services because the part was under warranty by Saf T Auto. Neil concede that it was and explained that it will be fixed at all cost in three more days. What troubled me the most was that the underlined issue of the noise conming from the rear was never repaired after I was assured that the caliper was the issue. And to insinuate that the bearings needed to be changed at an additional cost intially then to confirm that they were under warranty after I refused to pay the cost is severely suspect. No apologies we're given. No "we will repair as soon as possible." I was told it was safe to drive around with damaged bearings. Somehow, I believe that is not an accurate statement. I'd give no stars if I could to reflect this second visit.

friendly and reasonable. I would recommend getting a quote and proceed if you could afford it.read more

I called to confirm they do emissions testing and was told their hours, no appointment needed. I…read morewent the next day (Saturday) at 11pm and they were closed although they told me 1pm and their door confirmed.

I have had brake and rotor work done with this business a few times great price and service. I was…read morethere today and had my rear brakes replaced for an affordable cost. Upon pulling in one of the technicians was looking at the rear bumper of my Nissan rogue which one corner was popped out slightly due to being rear ended recently and the driver that rear ended me took off without providing insurance. After the job was complete for the brakes and I was about to leave they took the time to quickly set that part of the rear bumper back in place out of kindness and now it looks brand new again! Super nice and great service! Very appreciative of them going out of their way to correct an issue they did not have to assist with. Highly recommend great service and people that will go the extra mile for the customer!

They were quick, affordable, and trustworthy when they replaced my muffler. They kept me informed…read morethroughout the process and my car runs and sounds great. I highly recommend this business.

Frank and the guys at E&G Automotive Machine are honest and are very knowledgeable about all engine…read moremakes. They're capable of true high performance engine building, including porting heads, port matching and engine blue printing, balancing, and clearancing. Crank grinding is a specialty, including stroker cranks. It helps if you know, and can explain exactly what your needs and performance goals are. Once you do, they'll get your engine to perform to that level. They can do block repairs. Not a lot of shops around with that capability. They do complete machining and rebuilding of any make of engine for everyday cars & trucks, and industrial engines as well. They've been in business here for over 35 years. Frank has 40+ years experience in automotive engine machining.

I wound up with a flat tire in the Stop & Shop parking lot across the street from Plunske's. No…read moreproblem, I figured: I know how to change a tire. But it was a rental car, and I immediately discovered there was no spare tire -- just a device to inject fix-a-flat goo and compressed air into the flat. I'd never seen such a device before, so I walked over to Plunske's and asked for their advice. The first person I spoke to dropped what he was doing to help me figure out how to use the gizmo. I returned to my car, reinflated the tire, and drove it to Plunske's. There I encountered a second employee -- Dan, I think -- who was just as friendly and even more helpful. He removed the tire, carefully checked it visually for holes or leaks, immersed it in water to look for bubbles (and found none), replaced it on the car, made sure it was properly reinflated, and sent me on my way. The whole process with Dan took about 30-40 minutes, and he couldn't have been nicer or more thorough. I'm very grateful for the assistance of both people who helped me at Plunske's.

I got stuck on the Wilbur Cross Parkway (Rt 15) and AAA said I had to contact a local tow company…read more I called Plunske's and they were very polite, answered all my questions (I was panicked) and got my car safely off the parkway and towed it to where I had asked them to. Very happy with their service.