The owner is very nice very respectful and very polite. I owe him a beer for making sure that…read moremyself and my family are taking care of and will be getting the equipment that we had picked up and dropped off for us we will be getting that later on like I said I owe that gentleman a beer

I was charged $125.00 to fix a $130.00 machine I'll never use this place again ... I RX you get a…read morequote and a receipt at all times.

I don't know much about engines or mechanical things, except for they take gas, oil, turn a key and…read morehope they start. My tractor never started when I needed it to, and always turned off when I didn't want it too. So, I called a few places and finally got to speak to Ed over at A Mobile Service. He is nice, friendly, easy going and reasonable on the wallet. I have a very old John Deere 317 so finding someone to work on this dinosaur was not easy. But I sure am glad I found him. He came by, checked it out, told me his opinions and so he loaded it onto his trailer and off he went. After a few days he calls me and tells me what he thinks is wrong with it and gives me his opinion on what he thinks it will take to get it running again. No pressure sales, no pushiness, he gives me a quote and we go from there. He replaced the starter, tightened the steering, brakes, fixed some knobs, fully degreased it, shined it and made it look and run like used/new lol. He even went as far as putting on a seat cover from John Deere. Little touch that went a long way. If you need any type of repair on a machine that runs on gas and has a motor I highly recommend you call Ed. Here are some pictures from before and after for appreciation.

From the owner: Repair of all things Garden and Lawn related - from weed whackers to chain saws, even Golf Carts!read more

Great service! Frank at the counter helped me with my purchase. Also shared his experience using…read morethe product. Thanks again!

I recently purchased a 30-year-old used Kubota tractor that needed a bit of work. I found Pioneer…read moreTractor in Fresno and contacted the Service Manager, Bob. I explained what I needed done, we set up and time for me to drop off the tractor. Although I had a bit of an issue getting the tractor there upon arrival I was greeted with smiles and positive comments. Bob assigned Kelly, the technician to my little tractor. Kelly diagnosed the issues and set to work correcting the problems. Issue one was the bucket cylinders needed to be rebuilt. There was a kit available but given the age not all the parts fit. Kelly was able to use what fit and clean up what didn't to make it work. With issue one addressed it was on the issue two a hydraulic fluid leak from the rear differential. It took some work to dismantle the attachments to find the leak which turned out to be worn out rubber plug. Kelly replaced the plug and did a complete service on the system. When I picked up the tractor Kelly was there to describe what he had done and provide me with additional information on how to use and maintain the tractor. It is clear he takes pride in his work no matter how small or big the job is. All the people at Pioneer were friendly and professional I would highly recommend them if you have a Kubota tractor or if you are looking to buy on

I needed to order a part for my Tractor. I called a company in Tulare who quoted me a price but…read moresaid that I should look at JM since they were closer to my location. I called JM. For exactly the same part they wanted to charge me almost 50% more. I went with the out-of-town company. I also have a friend who bought a tractor through them and who has had nothing but problems. They keep trying to charge him for warranty work and have yet to solve the problem. You might do better looking around for a different dealer

From the owner: Over the years, J.M. Equipment Co., Inc. has become recognized as one of the leading suppliers of…read morenew and used farm equipment, implements, forklifts, and material handling products to the farmers and industrial businesses of the Central Valley of California. The Company and its employees are honored consistently each year by its major suppliers for being one of the leading dealers in the United States for salesmanship management, and customer service.

I called MH Mobile Service yesterday and Matt came out at 8:00 am this morning and replaced the…read moreleaky gasket on the VTek Soloniod on my Honda Accord engine. This is the third time I have used MH and Matt has always been on-time and performed the repairs flawlessly. I can highly recommend him.

When I first made contact , he responded right away gave me his cell phone number to make things…read moreeasier and we scheduled a time for him to come assess my tire. Due to things I had going on i had to cancel. cacontacted himp back a few days later to come back. We settled for 8:30 am the next day. He arrived on time and told me I needed a new tire and said he would call around. He also stated that he would charge me $50 flat rate. And once we found a tire he could go and exchange it for me. I agreed upon that first. He told me that my new tire was going to be around 200 dolland I thought that was a little excessive for one tire, especially such a small tire. So he said he would call another place.He called another place and as he was on the phone I listened to the conversation and google the make and model. When? My Google search came up. I seen that for a brand new tire. It ranged from 49 to $70. He gets off the phone and tells me that he found one for a hundread plus tax. I knew that was a bit excessive. So I continued to Google why he said he was going to return the tire. I sent him the screenshot of the tires I found which were all brand new and told them please do not let them overcharge me for a tire. He text me back and said he found one for a $110. And I ask him to bring the receipt when he returned. I asked him for a receipt and he showed me a receipt for a $100. Was it a proper receipt? I don't know. I just took his word for it but told him that was more expensive than any of the other tires. I had looked up so when it came time for payment. He told me it was going to be a 175 when he quoted me $50 and showed me a receipt for a 100 I told him that was more than. We talked about, but at that point it was done and I was just trying to hurry up and end the transaction. I asked him if he had changed. He told me he did not at that point I did not want to pay him any extra money because I felt like he had already charged me way too much and informed him. I was gonna go to the bank and get change. Once arriving at the bank, the lines were too long and he was waiting outside with my car. So I just went ahead and gave him the money. So we both could be done with the trandaction. All in all, I really feel like because I was a woman he did take advantage and overcharged me and up charged me. I told him as I was giving him the money that I just wanted it to be done with. He agreed took the cash and then left. In all honesty, outside of him over charcharging me he got the work done.

Awful, awful, awful. Had a technician come out to inspect our forklift for some various leaks and…read moreafter paying a ridiculous fee for the inspection was told it would cost $1900 to fix it. Technician came out again to fix it, was very rushed, made comments about not having the proper tools and left. Long story short, my forklift still leaks, now smokes while running and is worse shape than before. Fix-all did me a favor and sent another tech out to diagnose (for free, thanks) the new problems and I got a $4k estimate to fix it again. Wait, why wouldn't that be in my first estimate so I could make a better decision on what to do? Seems odd to me. Don't trust them, don't use them, use anybody else there are a handful of companies that do the same work.

From the owner: FixAll Equipment services and repairs all makes and models…read moreof forklifts, conveyor belts, wrapping machines, pick carts and material handling equipment in the Central Valley, in the warehouse or on the job site. We specialize in immediate solutions to all your operational equipment service needs, getting a technician onsite quickly to assess your project and get to work. No breakdown is too big!