Called up Bobs to get a quote on air conditioner duct cleaning and spoke with Stephanie. Not only…read moredid she give me an unbeatable price with military discount, she got me an appointment the following day! Next day, Brian and Jordan showed up on time ready to rock. They did an outstanding job! Really cool guys. The whole job took roughly 2.5-3.0 hours start to finish. If you need air duct cleaning don't hesitate to call Bob's Repair!

I tried to post this review on Google, and to respond directly to Bob's before posting a review but…read morethey don't have an easy way to give them feedback. They do have polite people and do decent work but I did not have a good experience with their repair business. An annual inspection turned up a couple of small problems - low refrigerant in a system and a nearly failed condenser fan in another. No argument with that conclusion so I said go ahead with fixes. Got the invoice and should have paid more attention - a price gouge of epic proportions. Here's what I sent them that got rejected by their system: PS - registered professional engineer who should have paid more attention. 'I was not here when this work was finished, and I have no issue at all with the technician and work performed. He was professional. I agreed to all of the work. But I regret now not doing additional homework on the cost. A one pound 410a add should cost more like $100 at the high end all in. Easy to find on google or Yelp), given you can get a 25 lb Jug in the range of $250. And yes, there is labor and overhead in that , but for for a 30 minute job $325 seems excessive. I also was able to source the replacement fan motor with an identical Lennox model# from a number of sources- from around $200. Again, that doesn't include labor. So if I'm generous, you got $300 in parts, add 20% for miscellaneous. And yes, I get that there is 'Bob's guarantee' and you have overhead, but an 1800+ bill for less than two labor hours of work, make it 3 with travel time and even at 150 per hour - and maybe 450 in parts and material -the total markup at 2x is to me excessive. Plus your billing is deficient in the level of detail so it's even hard to understand how you could add it up to that much. My wife paid the bill of course, but with these prices even though the service is good I won't be using or recommending Bobs for repairs in the future. I'll do my homework.' PS - last postscript. You may have noticed Bob's no longer responds to Yelp reviews. Must be too busy. Or they don't care. Neither one is a good sign.

I got three other competing quotes before choosing Robco Electric, and I'm really glad I went with…read morethem. Chelsey was my consultant and she was extremely helpful throughout the process. She provided lots of information, answered my questions clearly, and made everything feel straightforward instead of overwhelming. Armando and his crew did the installation and they were excellent -- the install was completed in just 2 days, and everything was done in a clean, professional, and organized way. The workmanship looked solid and they left everything neat when they finished. Overall, great experience from start to finish. I would absolutely recommend Robco Electric if you're considering solar.

Robco always treat me well. They installed my solar panel and pigeons guard close to 10yrs ago. I…read morecalled them last week about the pigeons problem. They came in yesterday with Preventivd Pest Control to clean, fix, and reinstalled the pigeons guard again. I call this a great customer service and great company. Hopefully, I can finally say "Bye Bye Pigeons".

Seriously the worst company out there! Do NOT use these guys. My house has been like this now for…read moreover a month and nobody will come and fix it.

Horrible ZERO STARS!!!! Do not use the company. They do not answer calls and don't care about their…read morebad reviews. Its all about making money and scamming customers.

The salesperson was very detailed and informative. I got 3 bids and this one was the medium pricing…read moreof the 3. I had windows and sliders replaced. They look phenomenal. The installers were great and cleaned up after they were done and it's very easy to contact them for anything.

I went to Beyond Energy to get a quote to replace my front security door. Nate arrived an hour late…read morefor our appointment. While he was there, I asked if he could also give me a quote for replacement windows. I explained I was just looking for pricing and not ready to make a purchase just yet. He assured me he was not pushy. He gave me a total price for the windows and door. After telling him 4 times I wanted time to think about the windows, he refused to take no for an answer. He called his boss, Hugo, who came right over. They offered me financing and we tried for 20 minutes to get my application to go through. I said I would look for my own funding and get back with them, but they still wouldn't give up. By now they had been at my house for three hours and I was tired and just wanted them to leave. I agreed to sign a contract for half the windows just to get them out of my house. The next day I cancelled my contract. That afternoon Nate showed up at my door wanting to know why I cancelled. Very unprofessional. Beyond Energy will not get future business with me.

My solar system was installed by LA Solar Group over 6 years ago, so I thought it would be nice to…read moreprovide new customers with a look ahead after investing in a costly project. My 7.54kW system used 29 - 260W LG panels split into 2 arrays and utilized both M215 and M250 Enphase microinverters. The reason I wanted to try 2 different microinverters was to compare the performance. In the end, it really didn't matter much. Bottom line, shading and weather were the dominate factors in power generation and all the crazy details I looked at were in the noise. It was still fun at the time. So 6+ years after having this system installed on my roof, I have had ZERO problems (kudos to LA Solar Group and the quality of the hardware). My system has produced over 72 MegaWatt-Hours of power and each and every solar panel and microinverter has reported data (input voltage/current, output voltgae/frequency, and power) from day one over that period of time. This telemetry allows me to see exactly what's going on in my system and if any one of the 29 panel/microinverters acts up, I will know. My system has already paid for itself based on my calculations, so I am a very happy customer. In addition, when I have questions for the LA Solar team, I still get answers. Highly recommended. With the cost of solar dropping in price over the years, it's really a no-brainer.

The 6.8 KW (peak) solar system that these folks installed for me really rocks! So if you are…read moreplanning to install a solar system, look no further and hire this company. I say this because I did my homework right and had obtained over six estimates, and this company beat all the other five not only on price and quality, but also on other (rather important) things as you can see below. 1. Price: This company beat all the others by nearly 20%, and all the other five estimates came very close to one another to the point where I was suspecting that there is some sort of illegal "price fixing" that is rampant industry-wide, but not for this company since it came far away (and below) all the others. 2. Equipment Quality: The system they installed was the most advanced compared to all the other bids. It used higher-end Panasonic panels, and Enphase micro-inverters and combiner. Others bid for lesser-quality no-name panels with one string inverter and a set of optimizers. After much research, I think a micro-inverter based system is superior to the string-inverter based system (so don't listen to the confusing information you find on the web, which portrays the two types of systems as being "equivalent"). So with a total of just 20 panels, my projected annual solar energy production should be about one and a half times my consumption. This should bring down my PG&E bill to the minimum $10/month, and should be able to provide all the electric energy needed for an extra electric car I may purchase in the future. 3. System design: This company had the most precise and realistic design, and that is very important because some of the bids I received were not realistic as they sketched more panels on my South-facing side of the roof than that side could possibly fit. This inflates the projected energy production, but is NOT realistic. In my case, the optimal design was to use the Southern-facing and Eastern-facing sides of the roof and to arrange the panels 50/50 on both sides. This company nailed the design right, but other bids like I said was either plain wrong, or were not realistic. With this design I was able to get a peak production of 6.2 KW, which is close to the theoretical 6.8 KW peak (the difference being mostly due to the orientation of my house). 4. Consumption and Net Monitoring: Most contractors let you monitor ONLY the energy production of your solar system, but this company gave me the ability to monitor the CONSUMPTION of energy by my house and the net energy exchanged between me and utility company on an instantaneous basis (actually every 15 minutes) and on the same Enlighten App as shown in the picture. This is really useful if you would like to do any energy planning in your house to see who/what is really consuming electricity. Granted that you can see the consumption on your utility website, but that data is one or two days delayed and does not show up in the same view as the production, and these two problems make the data from the utility company useless for that purpose. 5. Other: All the folks of the company I have dealt with are ethical in their dealing and are reasonable. The company installed the system in two days, which is very quick. Getting the consumption monitoring to work correctly took a while longer though.

Panda Solar was fantastic to work with. We had a roof leak…read moreand needed to have panels removed and replaced after leak repair was done. They even helped with arranging a solid company to do the roof repair. Also added critter guard, ridge spikes, and enabled direct monitoring for solar. All went without issue. Coree and Blaine are solid and were incredibly responsive throughout the whole process. Will be reaching out in the future for additional work when needed!

I had a Sunverge battery in the house attached to our solar system. Sunverge went out of business…read moreand I did not want a giant lithium battery sitting in our garage with no way to monitor its health or status. Tried calling many Solar companies and Panda responded right away. They came out and were able to remove the battery in under 3 hours and all the cables and other associated stuff with the Battery. They knew exactly what they were doing and returned my electrical system and solar to the original makeup. I highly recommend Panda because they responded quickly and were totally honest. They did not try to sell me anything as well. They came in and did the job they promised and as quoted. If you are looking for a solar company I would highly recommend Panda solar.

Unprofessional, made promises and did not come back to fulfill their promise. Took advantage of our…read morekindness to him. Should give zero stars due to bad service and unethical practices.

I have been calling for the last 2 month because my solar panels are not producing power. They…read morehaven't been since February. They have hired a 3rd party company to answer the calls. All of the operators say that they only send messages via a queue. They don't have direct numbers to anyone that actually works in the company. My sales rep, Caleb Roach, is also not responding. Horrible way of running a business.

Thank you to Alondra, Tommy and the whole T&K Electric team for responding very quickly to resolve…read morethe issue I was having with my solar system. Thank you so much, Don M.

These guys are extremely efficient. They got to my house around 6am, and that shows how motivated…read morethey are. Pedro, Brandon, Ignacio, and Ramon all hit the ground running with my solar panel install. The team installed over 30 panels in around 5.5 hrs. Quality checks were done at close, and the next steps were explained to me before they exited the project. I highly recommend them.