It's always a pleasure working with Sunrise, our technician Alan was super quick and helpful as…read morewell as efficient and professional. He gave a thorough explanation on what was wrong with our lift and took time to acknowledge our concerns. Very good communication skills definitely recommend !

Excellent experience. Rented a forklift to unload a trailer. Forklift delivery was a bit expensive,…read morebut was perfectly on time. Strongly recommend.

We rented a power washer surface scrubber from them. Their customer service is amazing. I contacted…read morethem initially to find out if they had what I needed, they were helpful and informative. When we came to pick it up, they showed us how to use it. We had a minor issue when we got home and called them. They couldn't solve the issue on the call, so Roger came out right away to the house and fixed it! It's an employee owned company and it shows. They have great service and truly care about their customers. Highly recommend them.

They rent you equipment with pre existing damage, when it breaks on you they make up many excuses…read moreto blame you for the damage. They'll keep your daily charge plus deposit without even think it through that they might have made a mistake. I rather go else where.

Mr Avery is the Man! I've had my Honda HRN216 For about 6…read moreyears and recently noticed a weird high/low pitch noise. Additionally, would shutdown after a few seconds of mowing. I reached out to Mr Avery and diagnosed the issue and it needed a new carburetor. Problem solved! Feels like brand new and can get back to mowing again. I appreciate ya Mr Avery!

I had this gentleman fix my lawnmower today. He was right on time and quickly set up to repair my…read moreold mower in my driveway. Not only did he fix it, as he repaired my mower, he explained what he was doing and showed me how to troubleshoot any further issues. I had replaced my air filter and spark plug and I thought my carburetor was the issue. It was not. My mower typically took 10-12 pulls to get it started. After it was fixed, it took a low effort pull to get it started. He also sharpened my blades for me. He is very friendly, knowledgeable and a joy to talk to. I highly recommend him if you need any small engine repair or service.

They gave me great recommendations on purchasing a new lawnmower and even recycled my old lawn…read moremower. I love businesses like this. Locally run and super honest and friendly. Thank you.

This is a first class old school business. I have used these guys for tiller service, mower parts…read moreand recently purchased a string mower/weed wacker. I do shop to get the best price when purchasing a name brand machine. I noticed that the yard machine prices are the same here at Schaa's as the big box stores. With that being said, I made that weed wacker purchase today. It wasn't that big of a deal until the owner brought me outside and showed me not only how to use the machine, but restring it as well. The guarantee for the machine is outstanding. The machine was started to guarantee it was working when I got it home. I'm really impressed with these guys. Give them a shot!

These people know equipment and have really good mechanics. They've adapted to the new California…read moreelectric landscape well. If you need something new or have something old that needs servicing, their prices are in line, and their staff is knowledgeable. The one thing keeping them from a 5th star is their ridiculous 30% restocking fee. If you buy something and want to return it unused, that's a pretty raw deal. So, before you buy something from them, make dang sure you need it. Other than that, this is a great shop.

I've lived in Campbell my whole life and had no idea this place existed until my fiancé asked me to…read morego with him to pick up his Honda lawnmower that needed to be serviced. Who knew lawnmowers needed to be serviced?! Apparently, this is the only location in the Bay Area that services lawn equipment. We lucked out with parking right out front, but this place gets busy so you may need to park on the street. Minus 1-star for each of the following: All-in we paid $299 for the service (parts and labor) which I honestly thought was kind of expensive given that you could buy a brand new lawnmower for a few hundred bucks more, but who am I to say as I'm not the one actually mowing our front lawn. Service is EXTREMELY SLOW. We walked in and took a number right away and the 2 cashiers were already helping customers. I saw ~6 employees walk throughout the store while I was waiting to be called up. An older Hispanic gentleman actually cut the line and went straight to the cashier without having a number. What is the point of having a number ticketing system if you're not going to enforce it?!

I couldn't ask for more. I contacted Ryobi direct and they just told me to contact A&M who was very…read morehelpful in getting my broken warrantied items replaced or repaired. It was going to cost a lot to ship them so I drove them to the repair center 80 miles away but they allowed me to send all my serial numbers in ahead of time so when I got there I could just swap my broken tools for repair or replacement. I was very happy. I would highly recommend them for any tools warranty repair.

Left my belt sander with this company on April 8 and have not been able to retrieve. I called,…read moretext and left numerus messages. First that they had moved in later April, than they were looking for it after the move. Next they said that they would locate it over the weekend. After several broken promises to get back to me in June and early July. I have no other recourse. July 21, 2026 WARNING - Do not leave tools here for repair. You may never get them back and they will not respond to you

I have been going to Jan and Deily for the past year and a half, for various company projects, as…read morewell as my side-projects for my house and cars. So it has been due time for me to write a review for him. Before I do, I have to say it is funny to read other reviews on Yelp, like the one about pressing car bushings (which truly not even specialized car shops would do). I have to go back to Jan for that, because I did not know he did such things. I had given up on replacing bushings on my car, after being turned down by so many local auto shops and mechanics. Now for that reviewer that rated them badly for a four week lead time... what sort of expectation was that? A poorly-run machine shop has downtime to let anyone cut in. By all means go to those shops instead or pay an arm and a leg, if that is the expectation... however, Optima Precision operates like all properly run, established machine shops do... schedule your work into their operation or work an expedite out with Jan and Deily... We are even lucky they are open to our side-projects. Bottom line, talk it out with them. They are very open to making things happen! Anyways, just to give a little background, I formerly worked as a design engineer for Zodiac Aerospace's oxygen system division, that made a lot of pneumatic components such as valves and manifolds. I can certainly attest that Jan and Optima Precision has the expertise and capabilities to machine top-notch quality parts. Whether you are dealing with extruded, cold-pressed, tempered aluminum, steel or etc., or softer brittle plastics like plexiglass or acrylic, up to something like 6 feet by 4 feet (double check with him), he and his crew can take care of that. I originally went to Optima Precision because Jan and Deily were the more responsive, local machine shop. They are very approachable and easy to communicate with (their English is solid). Most importantly, their pricing and lead times were very competitive, compared to the other shops in the area. Easiest way to describe them is that they are flexible and understanding like the old machinists but they operate with the newer CNC mills (even though they have Bridgeports off to the side). In other words, they are not like other new machinists that refuse small orders and cannot think other than what their CNC machine tells them they can or cannot do. What do I mean by an old machinist? Jan did not just go off my engineering drawings, but he verified my design intent to make sure my parts would fit and functioned well in my application. He was more concerned with what I wanted my part to turn out as, rather than what his machines could or could not do. To affirm other reviews, Jan and Deily are truly open to make small quantities (even one or two pieces like other reviews stated) and, of course, scaling to large production quantities. If you have worked with machine shops enough, you would understand that Optima Precision is a no brainer to have your parts, at least, quoted there each time. Long review, but hope that helps you all when considering!

I approached Optima Precision to machine 2 simple holes in an automotive part. I explained exactly…read morewhat needed to happen and what the part was for. I mentioned I was not in a hurry and could leave it for the weekend. Before I could finish explaining and before price was even discussed I was interrupted and told the wait would be 4 weeks. To machine 2 holes? Shouldn't take a competent machinist more than 10 minutes. No thanks. I dropped the part off at another machine shop and had it back minutes later machined perfectly to specification.

Stopped by to get a custom metal cube for a special client of mine. Joe, the owner, heard me…read moreasking for it and personally did the job for us on the spot. Outstanding service and help. Thanks!

Thanks for the custom welding on the Ford 9" Rearend. After paint and install of all the components…read moreit looks great.