I ride an older bike, over the years, it has gotten to the point where the carburation is so bad as…read moreto be unrideable. I took it to bayley's and, after giving the me the requisite headache about it not looking brand *ing new (every motorcycle mechanic does it. If your parts are not brand new they will b*** and blame you. It happens, but then you don't ride to please them, do you?) he took the job, which is a relief, because half of the reason it looks poor is because of other motorcycle mechanics. Anyway, guy gets the bike done in the scheduled timeframe but then tries to weasel out of taking responsibility for it running correctly. Says "put real gas- no ethanol in it." So I do. Runs just like new! Problem: there is only ONE station within 100 miles which sells ethanol-free gas. A motorcycle has about 100 miles in a tank. So I had to fill it up at a gas station which sells regular 91. It now runs exactly the same as when I brought it to him. I got ONE tank out of it, because if you are chained to a 50 mile radius (100mi /2) of that station which sells specialty fuel its NOT FIXED. Mechanic blames "bad gas." One tank of standard 91, from a high volume station, as the manual calls for, doesn't destroy correctly done work. Brad is friendly and timely to be sure, but, really, if a guy's work only runs on specialty gas, then its NOT DONE CORRECTLY Caveat emptor

My 1995 Honda ST1100 had a coolant tube leak. I had disassembled it as much as possible when I…read morerealized that completing the repair was beyond my capabilities. I looked for a place that could fix and reassemble the Honda. I found Bayley's Repair and checked recommendations on Yelp. I am so glad that I brought the motorcycle to him. It was a great choice. I brought all the bits and pieces to Brad Bayley. He was not upset that it was disassembled. I gave him a description of the problem as well as a short list of other things to do like change the oil. I told him that I wasn't in a rush. Brad called about a week or so later and said it was ready. The bike ran like it was new even though it had 146K on it. All the repairs were done. Brad showed me the coolant hose and location where the leak occurred. The explanation and answers to a few other questions were concise and clear. Brad has a small shop that is mostly filled with motorcycles. It was exceptionally neat and well organized. The bill was quite reasonable. I remain pleased and highly recommend Bayley's Repair.

Incredible service and work on my 1968 Honda 90! They picked it up and brought it back. I got a new…read moreback tire (in stock) and charged me what the big store wanted to charge for just putting the tire on the rim. I highly recommend Allen's family owed local shop!

Fantastic Customer Service and very helpful Got a Honest…read moreopinion on what we should do with the dirt bike situation after having it checked out. They also have really great merchandise. We will definitely be back Thanks for Everything!

Big 4 built out my 2021 Yamaha YZ450 into the baddest Yeti snowbike around! Chaun and the team at…read moreBig 4 are the most knowledgeable service and sales team in the area when it comes to snow bikes and dirt bikes. I have used other shops but their personal first hand advice and consultation when building a snowbike or outfitting your dirt bike is 2nd to none. If you are looking for excellent local service and the job done right then you should use Big 4 Motorsports. I also love the fact that they are family owned and operated. Can't wait to get my new machine on the snow this winter.

Adventure Outdoors was such a positive experience! David and Sam are so friendly, and extremely…read morehelpful. They have a nice variety of machines to chose from, and I was surprised to discover how family friendly this experience can be. They have helmets for the little ones, and for adults, as well as other gear. The location is convenient for driving from the shop to Canfield Mountain. They also offer a trailer if you would like to take them camping for the night, or an entire week! Thank you guys for making this such a great experience!

He's a total rip-off I gave him $300 up front for parts. I had filled my jet ski up with a $100…read moreworth of premium gas before. I brought it to him make a long story short. I picked it up without nothing being done to it. And all my gas was stolen. I gave him many chances to make things right?And he never did.

Gus was honest, good price and great service! Winterized sea-doos. Looking forward to using his…read morebusiness in the future.

I thought KMR was great to work with. They were very knowledgeable and professional to work with…read moreand really took the time to go through my bike and get it perfect.

I am very disappointed in the service I received from this shop. Initially I bought handlebars…read morefrom them and found them to be friendly and informative. So, when I took my bike in with questions about my clutch and it needing carburetor adjustments, I was told I needed my steering head bearings replaced and that nothing with the clutch was needing to be fixed. So, for the sake of safety, I made an appointment. Now, I made this appointment a month in advance to ensure I would be able to get my bike fixed efficiently. I also said to replace the valve cover gasket since it was leaking. I dropped off my bike on July 6 and the bike was not ready until August 8. I was forced to sign something that stated vintage bikes could take longer, but I had no idea it meant over a month! When I had taken my bike to a different shop, they had the service done the same day. I thought that was the whole point in making an appointment to begin with. Also, I had to be the one to contact them for updates. The only time I heard from them was to inform me that I would have to pay additional money for a part that they broke by torquing it too much. And, the part would be used since it was no longer carried. This alone made me very unhappy, but I wanted my bike back. I told them if there was any other service to be done, please do it since I did not want to wait another month if I ever brought it back in. However, when I went to pick up my bike, they only had fixed the steering head bearings and rather than the original $200 I was quoted, I was forced to pay $400! I do not understand why they take any more customers if they are so overloaded (tons of bikes are always lined up out front). I also am incensed that they recommended I have carburetor adjustments done, the FT Master Cylinder rebuilt, and the valve cover gasket replaced when these were things I was told didn't need to be done or would be done too. This is some of the worst service I have ever had in the mechanical history of my cars, mopeds, and motorcycles. I do not plan to return nor do I think others should give them business. I feel ripped off and do not feel like this business is operating with good ethics or integrity. On top of it, when I voiced my dissatisfaction, I was smiled at in return. I do not think this is a funny situation and hope others do not fall for the long winded rhetoric they give.

Great place to get your Dirtbike parts. Locally owned and family operated. they seem eager to help.read more

This is the best motorcycle shop in the area ! Great selection and matches prices. Very…read moreknowledgeable and the owner rides more than I do so he's got all the knowledge abs experience you could ask for. And they just relocated to a bigger brand new shop! Go check em out!

Found my Motorcycle Mechanic/Shop! Worked with Metrics Speed Shop to find the appropriate…read moreaftermarket exhaust "Bassani 2into1" for my 2020 HD Iron XL1200 Sportster, and thorough tune to accommodate the upgrades. The process was informative, the ordering and Install was quick and clean! And the price point for the complete job was appreciated And the Tune Metrics Speed Shop installed... was a complete night and day difference! Couldn't ask for a better Mechanic/ Shop.

Contacted Metrics Speed Shop to replace my stock exhaust with upgraded true power duals and then…read moretune the bike. Brandon was great to work with. He was able to get me in and get the work done quickly. Not only that but saying my bike was dirty when I dropped it off is an understatement. When I arrived to pick-up the bike it was clean. Brandon went above and beyond. He is great to work with. He guarantees his work, and his prices were exactly what he quoted. I highly recommend Brandon and Metrics Speed Shop and will be back soon for more upgrades!