1/2 a bicycle frame: $82.50. At Leon's Sandblasting on 49th St it cost me just $40 for the same frame. read more

Myers Sandblasting - $82.50 for 1/2 a bicycle frame - Sandblasting Near Me - Oakland, California

See all

I'm always pleasantly surprised when I get over the top down home service but when the quality of the work is excellent AND the price is competitive I'm on cloud 9! You just don't find this kind of service anywhere anymore ! So here is MY story. I called around and Meyers gave me by far the best ballpark estimate for sandblasting my wrought iron 4 piece patio set. It's been in my family since childhood and I wanted to be sure to restore it properly. When I arrived with my furniture Ric unloaded it for me, quoted me an even cheaper price for the sandblasting than I was expecting and then procured several bids from other business to have them painted. I thought that was going above and beyond until he then offered to deliver the furniture to the painter, pick it up and then hold it for me until I could pick it up (I was going out of town). I couldn't be happier with the results and am so pleased to give my business to such a great guy! read more

Myers Sandblasting - Sandblasting Near Me - Oakland, California

Took my Mustang there to blast. Work was really good. Super helpful to load and unload the car off my trailer. Price was very reasonable and he came in at the low side of his estimate. That never happens this days. I found this shop on Google, I was a little worried at first. But in the end it was a perfect experience. read more

See all

I hate to write bad reviews but the experience I had in trying to contact someone at Myers warrants it. First, I sent an email about getting a quote for sand/bead blasting with no return for over a week. I then tried to call when a woman answered the phone and was exceptionally rude. She stated she did not "think" they did bead blasting on doors anymore. I then said, okay, multiple other places I contacted suggested I reach out because you do which then prompted her to be even ruder. read more

Found this hidden gem while trying to find someone to remove paint from an aluminum boat part. Super friendly and offered to test a small area to see how hard it would be to remove factory coatings. About 20 minutes later worker comes back and says "it come off easy" and whole part is cleaned, no paint or residue whatsoever. Total cost $60, what a deal. Only downside is huge homeless presence on their street. No on street parking available but they do have a yard for you to pull into. I will keep their card for future projects. Good job guys! read more

Prompt, friendly professional service. They did my entire 57 Chevy, not a bit of old finish or rust !! The crew was helpful in unloading and loading all my parts and body. The price was reasonable, lower than other quotes I got. read more

This place was great. I went here to get a cast iron grill plate cleaned up. I walked in to a friendly greeting and hung out for 30 min and got my plate back. The price was right and met Ric, I believe was the manager or owner. Great work good people. read more

I was recommended to call Rick at Myers by Melrose blasting down the street because they dont do full cars so I called in and he was more than helpful. First I left a message in the morning and never heard back but when i called in he estimated me without seeing the car and was more than helpful and willing to give his contact information. For my 69 chevelle to be media/sanblasting bc they do both he estimated it to be $550-800. He currently has a few chevelles of a similar year that he was working on in his shop as well for blasting. However, they do not leave it in primer for you as they are restricted by the city of Oakland. Great people though and willing to help. One of few media blasting i found and contacted in the area that would do it. Im located in Moraga/Walnut Creek area and it was hard to find anyone to do this work. read more

This review is a little late....about two years I have been doing a lot of research of local bay area media blasters that can handle an entire car. There are a lot of blasters that can do smaller items, but not an entire car. I brought my '65 Mustang to Myers and got the entire car (interior, exterior underside and engine compartment) and could not be any happier. The entire process took about a week which worked out in my favor because at the time it had rained (2012) When I first saw the car I was amazed on how thorough of a job that was done and really wasn't expecting to see what I did. At the time my drivers side front fender was not salvageable based on the heavy body filler job that was carried out at some point of its lift. Turns out they had one blasted and ready for my to buy...which I did. The only drawback with Myers is that you have to arrange for a place to prep and prime the car, which in my case I ended up doing it myself since they do not have a spray booth. Actually let me rephrase that. The city of Oakland will not allow/approve a permit for them to perform that type of work. The estimated price at the time was what I paid with the exception of the fender which I bought from them. read more

Amazing job bead blasting a $$$ Titanium bicycle frame. Came out so clean- better than MOOTS finish if you ask me !!!! Such an incredible value as well. read more

Just a plain old throw back shop! I've been coming to "Myers Sandblasting" since the 70's, 40 years baby and still going strong! My latest deal I dropped off my part at 8:00am and told it would be ready for pick up by 12:00pm. Four hours later and $25.00 I was down the road! Couldn't be less painfull and true to his word. I was totally satisfied. Thank's Rick, you guy's Rock...... read more

Just plain awesome. Reasonable pricing, excellent work, and always on time. Just doesn't get much better.

Always great to see a family owned business that knows the trade and treats people fairly. Rick spent time with me on the phone answering questions and ultimately took a very rusty truck in for some TLC. If you have a project/classic and want to see what metal is left in it, you need to go see Meyers before you get ahead of yourself. read more

After searching for a reputable shop to do some media blasting on body panels from a 1971 240Z, I went with Myers. Not sure if they have a lot of experience with media blasting larger size panels that can warp from the process. I was told that there should not be a problem with media blasting the hood as long as I have not cut a hole in the original hood. Well after getting back the hood, doors, quarters and rear hatch, I noticed the rear hatch and hood were badly warped. After trying a few body shops they all declined to fix the warped panels. After speaking with Ric at Myers, he said if I could find a shop to repair the panels, they would help with the cost. He also stated that he would update there web site to let customers know that this could happen. I found a body guy that did the work to fix the panels, after emailing Ric three time over a 4 week time frame, he has not responding at all. To me this is poor customer service, at least he could respond sorry we can not help with the cost. Pete read more

I just got back from picking up my cast iron skillet. This poor pan sat in the elements for over a year. It is for sure not the same pan I brought in. It's amazingly perfect! Great price, great timeline and super nice people. Cute dogs, too. read more

I recently used Myers sandblasting for a few jobs I had and I must say I could not be any happier or satisfied at the results I got . They did a wonderful job on my truck frame and some misc parts I highly recommend this shop . I have been to several other for previous work and no one. I mean no one comes close to there professionalism . I guarantee you I will be back. Thanks a bunch Ric and company! read more