Took my Remmington wingmaster 870 pump shotgun with a ribbed barrel to him to have it shortened to…read morebe more tactical. I was nervous because of the high-quality rib barrel. I've heard nightmares When you try to shorten it to tactical length. He did an outstanding job! Looks so good!! He even put a bead site on the rib barrel!! I highly recommend Craig as you can tell he loves his craft and is an excellent tradesmen who is also Very reasonably priced!!

Update, I finally pick up my 1911 after almost 3 months of waiting... the trigger felt great…read morealthough he made the safety stiff as hell. Worst yet, he lost my magazine!! He shuffled around looking for it, but I said forget it I just want to go. I talked the price down a little but it's still not worth it. I've never written a critical review however I cannot in my good judgement recommend this guy.

Super fast, super friendly, super professional. And goes above and beyond with service and knowledgeread more

The instructor definitely knows his stuff, is really informed and is great at explaining a lot to…read moreyou. That part of it was really good, and if that's all that there was to say it would be a higher rating. But... here's where the stars start to go down. 1st up, this is not a class room environment so know that going in. It's in his home, in his living room on a couch. Which isn't terrible except that you're sitting on a couch for 5+ hours which is super uncomfortable. 2nd up, they bring in a salesman that will pitch you lawyer insurance essentially and that took up over an hour of time (which made us go an hour over time) Lastly, I would say they could have handled the admin/fingerprinting part a little better. They waited until the last 20 minutes of the supposed class time to start this process for 10+ people which as you can tell, took forever. I think if they just focused on getting a better environment for the class, getting rid of the salesman, and being a little better with time management they could increase the stars.

Excellent service. They've always been professional and fair. We had them tune up our snowblower…read more When I picked it up I thought I was getting the wrong machine. It looked completely new (about six winters old). Croft straightened all the blades, made the secondary propeller hum once again (or whatever the thing is that shoots the snow up through the tube). And, the coup de grace -- the beaten and worn scraper was beautifully finished with a new, perfectly straight blade. They've provided the same great attention to our chainsaws. Plus, they are always upfront about something being worthy (or not) of repair. Great shop.

On November,13 2025 I called Paul's All Right (Wrong) Sales & Services about repairing my…read moresnowblower. I mentioned that I had my snowblower repaired last year and thought it was $25.00 for pickup and delivery because they said it would be $35.00 now. And I remember they use to do it for free probably because they were hard up for business. Robbie started to get a little irritated at me. We talked about what was wrong withe machine. He said it would need the cable and probably the dashboard too and it would cost $90 for labor $67.00 for parts and $35.00 for pickup and delivery total $192.00 plus tax about $200. So I said just come and pick it up, they said okay it will probably be tomorrow. They called me a couple hours later and said can they pick it up now? I said sure. The very next day they called me and said we will need to order the parts from a different place because Husqvarna is out until March of 2026. I will cost $20.00 more. He also said that I should also get these things fix the Auger is bent and the Scraper blade all need to be replaced. Total charge would be $550.00, I said I will get back to you. I went down to to the shop and Talked to Emily I told her I could get all the parts for $67.00 the dashboard and cable through Amazon. Emily said we don't buy through Amazon. I said how much it will be she said $240.00 I said including tax? Then I took a business card and wrote down $240 she didn't say anything, then I left. Emily called me up November 24 at 2.36 pm and said your snow blower is ready and its $252 and you need to pay for it and we will bring it up. I immediately said we agreed on $240.00 including tax she said there's $12.00 shipping. We argued and I think I said why are being such a bitch. Anyway we continued argue about the extra $12.00 then she hung up on me. I called her back and said I will give you a credit card but I will back charge the extra $12.00 she said I need cash then. I called a few days later I have cashiers check they said they will not take it only cash and you have been a pain in the ass speaking real loud yelling at me. Then they said I have 30 days to pick it up. If you look around on the internet you will see all the negative comments about them including the Better Business Bureau. Their customer service is horrible mainly with Emily. Some of the other complaint is how they find other problems with your machine other than what you wanted fix. They also told people that their machine was a piece of sh*t. They have also told customers to get the F**K off their property. This company should not be in business please do not do business with them you will probably regret it. My name Paul Guymon I have lived in Bountiful for 35 years and have been treated this bad by any business. When I called Paul's to pay for my snow blower repair they told me that Croft doesn't want my business. I went to Croft on last Friday to talk about their Honda snow blower and maybe buy one. I told one salesman about my problem with Paul's he must have called them and they told their side of the story. If its true that an employee said that Croft doesn't want my business. That employee needs be taught that all customers are important. I don't think Croft is anything like Paul's they try their best to treat customers with the best respect. If you look at the comment about Paul's company on yelp, BBB and others you can read they treat some of their customer like crap. They use foul language and threaten them.

They always take care of me. I have been coming here for years. Bought a blower, trimmer, and…read morechain saw. Always tuned me up and show me how to keep them lasting a long time. Only came in for one break down, had it back quick. Everything has lasted a long time. They didn't up sale, they put me into equipment for my needs. I love my equipment they sold me. I get made fun of for driving a Ford though. Still, I give them 5 stars.

Began using this business when I decided to purchase a zero turn lawn mower for our residence…read more Fantastic purchase, great employees, extremely customer service oriented. Glad I decided on the purchase from this local family business!!! They've since serviced it several times. I can't say enough great things about them. Thank you.

Poor customer service. Sold me 2 defective knives, and would not give me full refund.read more

Very friendly staff. Answered all my questions and seemed eager to help out. Offered to show me a…read morevariety of knives and I didn't feel rushed to make a selection.

The carpet installers for a local retailer broke several pieces of furniture. The retailer found…read moreClassic Furniture Service to manage the repairs. Classic was terrific! They came to the house and assessed both pieces and worked with me on a convenient time for them to come pick them up. There was a dresser with two broken legs and a cedar chest with a broken leg. The dresser had other damage underneath as well. They completed the repairs and returned the items in about a week. I couldn't be happier with the service and care they took with my furniture. The price was reasonable, especially considering we would have had to replace the dresser if we couldn't have it repaired.

I love how this small shop restored my chair... broken arm. It is reasonably priced (just get…read morequote). They are not fast but the quality is worth the time it takes. I highly recommend them!

I found Amann through a Google search while looking for help with my Tin Lizzy longarm machine, and…read moreI only wish I had found him sooner! My machine had been experiencing some serious issues. After two in-home service visits from two different technicians and spending four and a half months with a repair shop in Michigan, the problem still wasn't resolved. Amann was the one who quickly identified the real issue with the machine. His diagnosis was prompt, his pricing was very fair, and he took the time to patiently explain what needed to be done. He also gave me thoughtful options to either repair or replace the machine, without any pressure. To top it off, he went above and beyond by sourcing a replacement motor for me. My previous experiences with out-of-state repair vendors had been far from ideal, so working with Amann was a refreshing change. If you're looking for someone who truly knows Tin Lizzy machines and provides honest, knowledgeable, and reliable service, I highly recommend Amann.

Floyd's is our go to for all our sewing machines! They do a great job and are reasonably price.read more

I have be doing business with Affordable Furniture for at least 20 years…read more Dave and his Crew do it all, if you need a spare part, or appliance they will try and fulfill your needs and deliver. Everything they sell has been cleaned and tested for functionality. Great deals...

They had a decent amount to choose from and the staff was friendly. Definitely not a bad place the…read moremiddle of a pandemic