My 2019 Forest River travel trailer developed a crack in the frame where the axle bracket is welded…read moreto the frame. I spent several months going through inspections with their authorized service center and had to wait while Forest River and the frame manufacturer developed a repair plan. In the end, the service center was unable to do the repair and my alternatives were to either drive my trailer to their plant in Indiana or find a local welder. Jeff at Furrion has great reviews and a friend also recommended him. He developed a plan similar to Forest Rivers' and repaired the cracks (he found a crack starting on the opposite axle weld as well) and welded 30 x 4-1/2 inch 1/4 inch plates on both sides of the frame, as well as some 2 x 2 angle iron to reinforce the frame both in front of and behind the axle welds. I am extremely happy with the results of the repair and will not hesitate to have Jeff do any future repairs or fabrication I might need. Forest River has also stepped up and agreed to reimburse me the cost of the repair as it met their plan specifications. I would add that another RV repair shop that does perform welding services refused to even attempt this job. Thanks again Jeff!

This review is strictly for the communication I had with Jeff based on my inquiry through Yelp…read moreabout getting some metal work done. Although Jeff didn't have the capability of doing the work I'd requested, his responses were very prompt, friendly, thorough, and VERY helpful! Jeff was able to give me some suggestions for places to check with, and I'd never have thought of doing that were it nor for his suggestion. If you need any metal work done, I'd recommend checking with Furion Fabrication.

I was looking for to do some work on my geo metro head. other shops were pricey, he got me quick!…read moredid outstanding work. And got the head back in no time. I couldn't have asked for better customer service. I will only be going through him from now on.

Today I had the pleasure of meeting Rob. First, I would like to say he is very personable and is…read moreextremely knowledgeable about cylinder heads. His shop is set up with all the modern equipment to do his work. This guy went ABOVE and BEYOND to help me. I would rate him with10 stars if I could and recommend him to do your cylinder head if you need. In my 80 plus years on this planet and being bamboozled by shady mechanics, this guy WILL Treat you RIGHT and do a Bang-up job. You Can't Go wrong with Louthan. Thanks ROB

I asked them if they could do an intricate water cut on stone - the answer "no problem"…read more Excellent people to deal with. Highly recommended.

An impressive facility to say the least. If you need metal…read morefabrication these are your guys

Our company was searching for a reliable machine shop and came across M&J Manufacturing. We were…read moreimmediately impressed by their professionalism and the quality of their work. We deal with very precise, complex parts, and many other shops were hesitant to take on the job after reviewing our drawings. M&J not only accepted the challenge but delivered excellent results. We highly recommend this shop.

They treated me so well! I had my 1969 Chevelle heads get worked on and it came out great! I have…read morenever had a manufacturing place do me as well as M&J did! I highly recommend them to work on any of your cars!

This is the best auto parts store around, one time I needed an electric fuel pump for my boat…read moremotor, it was a 1955 40 horse. Nobody had parts for the mechanical fuel pump they asked me what it was for. I told them and they got a pump that would work for me. I bypassed the old mechanical one every other shop wanted to know what vehicle it went into what year making and model and said oh, we can't help you. CAP Is the best. I've been going there for decades and they always seem to have what I need or at least they know how to get it or cross reference.

Clackamas Auto Parts is the best. Today my daughter went in to get new headlights for her car. They…read morehad the parts but also installed them for her! Seriously, you just can't beat that kind of service.

Chriss has a wealth of knowledge and experience as well as a very well equipped performance…read moreautomotive machine shop. Whatever you need for your project Chriss can get it done. Just visit his shop to get acquainted and discuss your needs. You will see the quality of work being done there and the friendly atmosphere and realize you have come to the right place. Chriss is super honest and will treat you right.

I needed a very small job done, just a metal tube that needed a thread cut into it in order to have…read morea ceiling light fit just right. I was amazed by how friendly the staff were, they jumped right up and acted like this was their biggest order of the year. They got it done the same day and for very little charge. I didn't know that this gem of a business (and a HUGE machine shop) was right in my own neighborhood. I couldn't recommend them any more highly - for any job big or small!

I needed a small job done and P & J Machine Works got right on it. They are so nice and…read moreprofessional and good pricing. I highly recommend this shop.

Very cool and helpful guys. I broke the rod on a hydraulic actuator on an older tractor's bucket,…read morebut these dudes got me sorted out.

This machine shop gets an A+ review from me. I had an out-of-the-ordinary request which they were…read morehappy to oblige. Char is friendly and helpful along with Jeff who tooled my axle. It fit perfect and ready in 24 hrs! Thanks!

I own a 1960 Chevy Belair. I knew it had a burnt valve when I bought it, but it was all original…read moreand in such great shape at such a superb deal, I couldn't pass it up. We just don't find these rare cream puffs much anymore! After the head was taken off by a mechanic, he found out it had a cracked piston below that burnt valve. So, I did a ton of research, and where it used to be you could find machine shops all over the city - NOT ANY MORE! One place had a 9 month waiting list! Whoa! I finally found James, at Independent Cylinder Head. He could work on my engine in about 2 weeks! And the quoted price was really reasonable too!! Super nice and helpful on the phone, and after talking to him for a while, I find out he has tons of experience at other machine shops. He went out on his own, and is the owner of this shop. Great! I picked up my engine from the mechanics shop, loaded it into my pickup, and dropped it off for James to work on. We decided to not do a rebuild, with keeping old parts that were still good, but do a re-manufacture with all new parts. The only old parts were the block, the head, and the crank...only because it wasn't available brand new. My engine will be essentially brand new after he finishes!!! It didn't take long at all and I was over picking up my new engine! I dropped it off at my mechanic, and waited for him to get to it. Not getting into all of that wait - Phew! He finally got it done but the mechanic I had chosen, couldn't get it timed right, and wasn't patient enough to work through it! I would barely run...and I certainly couldn't drive it as it was. I was outta there. This mechanic had no affiliation with James at Independent Cylinder Head. Since he had been so helpful and kind, I called James and asked his opinion on what to do. He said he had a mechanic buddy, that he used to work with for a long time, that had his own shop. He'd call him for me and see if he could do my timing/tune up. He called back soon, and I was in to his buddies shop in 2 weeks! He had a couple of jobs ahead of me. I had my car towed to his shop. The day after I dropped it off to the new mechanic, two hours into the day, he called and said my car was all fixed and was running great and I could pick it up! WOW! James came through for me again! What a quick and good mechanic friend he had. I went to pick up my car in Milwaukie, OR and drove it home to Beaverton, OR without an issue! I was doing 60mph on Hwy 217, with my little 6 cylinder 235cu.in. without effort! It was purring like a kitten! Just like I wanted!!!! :) Little did I know, the mechanic called his friend James, after finishing my car, and told him how it was doing. Then, a day later, James called me to make sure everything had gone well with his recommended mechanic friend! That was a surprise! ... What a nice man James is to care so much about his customers to call and find out how satisfied I was with his recommended mechanic friend. I told him I was super happy with the mechanic, the speed he fixed it in, and the low cost, and how happy I was to hear from him (James). I don't care if you've called 50 machine shops across the country and found one you figure you'll use. STOP! Call James, and TAKE YOUR ENGINE TO HIM! We just don't get this type of incredible service that James supplies anymore! I would think I was back in the 1960's and he was right down my street and gave me the neighborhood friendly service or something! I highly suggest this very nice and dependable machine shop owned by James. I'm gonna be 69 years old in 2 months, and I'm telling ya, we just don't get this lucky very often anymore to find this exemplary service from shops! If anything, we hear about how so & so shop charged so much and didn't do a good job after paying that much! Not so with James! He takes me back to when incredible service was THE MOST IMPORTANT THING in doing a job for a customer. James is a one of a kind GEM!

From the owner: Additional hours available by appointment! Proud to be Portland's newest* automotive machine shop…read morespecializing in cylinder head reconditioning/rebuilding automotive/marine/farm equipment and more. Competition/Performance & Custom/Classic Cars - all welcome! Additional services include: - Cylinder Head Surfacing while you wait - Crankshaft Balancing - Rod Resizing - Cylinder Boring - Engine Block Deck Resurfacing - Flywheel Resurfacing - Brake Drum & Rotor Resurfacing *AERA Member *ASE Certified Master Machinist *30+ years of experience

Pristine condition! I couldn't be happier with the service I received from Dan's Cylinder Head!…read moreAlvin is skilled, professional, and efficient. He took the time to understand my needs, provided great advice, and delivered high-quality work that exceeded my expectations. The turnaround time was impressive, and the pricing was very fair for the level of craftsmanship. Highly recommend!"

Good service, nice prices on service forth every single penny Todd was very nice to me, and did his…read morejob in one day. Very happy with my choice!