I have an older 2012 Buick Enclave and it needed new cv joints; axels, struts and shocks as well as…read morenew brake pads and transmission fluid flush I got quoted over $3900 by a local repair shop here in West Chase to do the job and that didn't include the transmission flush Dave and his partner did the the whole job for under $2000 Plus he also put on new outside mirrors for me and changed the brake fluid as well He told me what to purchase on Amazon for the parts I got everything shipped out and I paid about $850 for labor charges He is very dedicated and made sure everything worked well and gave me a 30 day warranty I highly recommend him

I hired Dave short notice to help me with an issue I was having with my throttle cables and…read morehandlebar extenders and I'm very happy how everything went and with the extra help of cleaning throttle body and intake as well as resetting my rear break he went above and beyond. he's very well priced, knowledgeable and experienced and as a new rider its was nice that he talked me through step by step what he was doing, why he would do it and how I can do it myself. I would hire him for any bike, boat, or car work.

I called Precision tuning out of the clear blue, to see if they would help me refurbish a bike that…read morebelongs to an older guy that has little money. the bike needed two new tires, two mirrors, and a standard service with the oil change etc. Mitch did all that, and also did a quick valve job, and fixed some type of air leak. heck, they even washed the bike and made it look great out the door. I will gladly recommend Mitch and Precision Tuning to other folks that are in need of getting work done with out fear of getting ripped off by someone I knew, from the minute I met Mitch, that, we were going to be related well. Because of the valve work, the bike has increased power/tork. My buddy says the bike is better than ever. A. Ekstrom

When I have to use a shop I always prefer privately owned vs a big box shop. Mitch and team did a…read moregreat job handling all the needed work, kinks and gremlins in my bike. They do what's right to make sure you and your bike are taken care of. Great attention to detail, recommendations only when necessary and treats customers fairly. It took some work but they got everything working at a high level and I'm pleased with the results.

I was looking around for awhile for custom brat style motorcycle. I came across Steel Bent Customs…read more I paid my deposit and began researching what I wanted. The process was slow but I understood it would be exactly what I wanted. 3/4 though the design process I got in bad accident and didn't think a motorcycle was a good idea. I contacted Michael and he said I could only get 1000 or the 4000 I put down. He convinced me that I would be happy with my build and it would be worth it. So I went through with it. Many times throughout the process my questions were not answered. This should of been a red flag. I had the bike shipped from FL to CA. I so excited. The bike arrived and it wouldn't start. It was leaking oil from 3 different places and I could hear metal on metal on cylinder 5. He told me to try and few things still wouldn't start. He said take it to local shop to get it looked at. I assumed he would pay for repairs. He paid $250 maybe? I'm now $1000 in for repairs and the following things have been found. I fully rusted out tank. One of the compression on all cylinders is minimum 10psi under what it should be one is 20. The rear tire was put on backwards. It is still leaking from crank case. The headlight stopped working. I can get it started but will never hold idle even with choke fully on. I could go on and on but I won't. This is all your need to BUYER BEAWARE DO NOT BUY BUILDS FROM HIM. He does not stand behind his product. He won't even answer my messages anymore. I miss the old days when two men could fight out their differences. No I must resort to leaving reviews everywhere. His products aren't worth the money or headaches. Way better builders out there.

My experience with Steel Bent Customs and Michael Mundy was so bad that I have a complaint filed…read morewith the Attorney General of Florida, the Florida DMV, the FLHSMV, as well as BBB. Michael put together a motorcycle ("Ginger", a triumph) for me back in 2014. The title never made it to me (or was lost? I don't know), but more importantly, Michael never registered the motorcycle in his name, and couldn't get me a title. He committed what in most states (Florida as well, I believe) is a felony by "title jumping", perhaps to avoid tax? I don't know. The next problem is that the motorcycle has a lien on it, so Michael bought a motorcycle without doing a lien search. Now, I'm left with a motorcycle that's been a paperweight for years, and for years, I've tried to get Michael to help me out. He's unprofessional, doesn't believe that he has to confide by the dealership laws that are in place, simply because he hasn't registered as a dealer. Michael has failed to help, or try, despite me asking him to go to the DMV locally to discuss with him. Don't use SteelBent Customs is my suggestion. Shady practices, mediocre work, and the guy doesn't have a clue how to run a business. Otherwise, when Michael buys you a donor bike, you might not get a title, and you might be left with a bike that's been sitting in your garage for 5 years, a title with a lien on it, titled under a guy named "Eric", who Michael paid cash, who will ultimately always own your bike.

I took my 04 Yamaha FJR 1300 in for valve adjustment and cam chain tensioner service. I also had…read morethe throttle bodies cleaned and adjusted. They also changed the plugs ,air filter, and coolant. It runs so much better now I'm very pleased. The price was in line for this type of service as I had gotten quotes from others places. Oh plus the bike has 63 K miles.

Only place that I know that does work on KLR650 n don't hassle. Chris is always there guiding…read morepeople in the right direction. Definitely a forever customer for any problems I need done.

Zach did a great job of overhauling my son's Suzuki 650 SV. It hadn't been used in a while and…read moreneeded lots of TLC. We took the bike to two different shops, the first one didn't handle the problems and overcharged us. The second wanted to overcharge too, especially on a part that we found priced at a tenth of what they wanted to charge us. Zach worked with us, stayed in communication throughout the process and did an excellent job! We aren't taking the bike anywhere else. Karen T. Brooksville, FL

I'm never taking my bikes anywhere else! Zach is the most down to earth and personable guy I've met…read morein this industry. And plus he does great mechanic work! Thank you Zach for getting my dirt bike up and running like the first day I got her!

I've been using Garry's services for over 20 years. There is no one better to work on any of my…read moreMotorcycles, I recommend him to everyone I know who rides. I'm seeing the review that was posted earlier and I know for a fact this is a total lie. That guy has never met Garry or been to his shop, he's mad because he has a crappy shop of his own and tore apart a persons bike and Garry is working hard to fix it. Disgusting people in the world but Garry and Precision Motorsports isn't one!!

I gave the guy my bike to get it running properly and came back broken. He tied down my sissy bar…read morewith tie down straps and broke the sissy bar. He went and jb welded UT and he didn't do it. He said he acid washed my gas tank to get the rust out. I never saw so much rust in a tank. He said he got my bike running but stalled out in first gear. The guy shady and he ripped me off big time. I would recommend him to my worst enemy. This is scott thanks for ripping me off. Hope he doesn't do this to anyone else. I guess my bike was too much of a challenge. Now I have to sell it as parts. Thanks!

Everything I want a bike shop to be. First, open on Sundays, which is so convenient. Second, able…read moreto hear about what had gone wrong, and then able to diagnose correctly what was needed. Third - able to fix it right then! I also loved that they had a lot of bicycle merchandise, including riding clothing and hats. After having a rear flat tire on my bicycle, and having a local shop unable to fix the problem, I brought my bike here. The worker put it up on rack, showed me how the new tape I just paid for at the other shop was put on incorrectly, AND showed me that my tire had see through patches on it, and clearly needed to be replaced. My tape, tire and tube were replaced, the cost was reasonable, and I was in and out of the shop in under half an hour. This is my new bike repair shop.

I was extremely disappointed with my experience. I brought my e-bike in to have a tube replaced and…read moresupplied the replacement tube myself, which I had already purchased on Amazon. The bike was in the shop for less than an hour, yet I was charged $80 just for the labor. That price feels excessive for such a straightforward repair. I believe local businesses should charge fair, transparent rates, and this experience left me feeling taken advantage of. I prefer supporting local shops, but it's hard to justify coming back after this. The owner should take a closer look at their pricing because this kind of experience drives loyal customers away.

Update the little hiccup I had got fixed an I want to thank Mr nick waldell for taking the time out…read moreof his day to fix the situation thank you and you will always get my business

I've been a customer for a long time. thanks to Chuck who I have been working with for about 20…read moreyears. has sold me many bikes.love having cycle springs up here in the Palm Harbor area.

I'm an Insurance Adjuster and I was sort of in a pinch for time given the impeding hurricane. I…read moreneeded a modification but all of my welding tools were at home in Houston. I found Greg's Custom Cycle Works after doing a google search for welding. After trying 4 other people that clearly didn't answer out of state numbers, I spoke to one of Greg's employees. He told me to come down to the shop and that Greg would be able to look at it and possible get the job done today. Without hesitating, I drive 47 miles to his shop. While driving to the shop I was preparing myself for another person telling me how busy they are and that they can't get to it for weeks. I show up and see all of these amazing posters on the walls. I realize that I didn't just find a random dude with a welder, this guy is an artist. Anyways, I meet Greg and he comes out to see my issue and what the job entails. He explains to me that he doesn't have this size of metal in stock but it's down the road. As anyone would do in my position... I explained to Greg that I would gladly go pick up the metal and bring it back. Greg agrees and tells me that he can get it done today. ‍‍‍‍. First off, who stops what they are doing to help someone same day? Secondly, he could've easily taken advantage of a situation, he didn't. He charged me a price that was much lower than expected. Greg and his boys killed it! I plan on going back and getting some more work done and can't wait to see what they will do with a larger project. I can not explain how happy I am with this Greg's Custom Cycle Works.

Avoid these clowns, came in for a simple repair that could've been done cheaper, left paying one…read moreband. Didn't even do the repair properly, had to take it in to claim the warranty. Parts of the bike were zip tied together, even though I gave them the screws and bolts that came with the bike, they charged me for a new set anyway. If you want the job done properly, take it anywhere else. Twice the hassle, double the price.