Steve responded to our call immediately. He was able to fix our vandalized iron gate same day for…read morea reasonable fee. We recommend him highly for his expertise, professionalism and response.

Steve came out and repaired and adjusted 3 gates. They work like new! A couple of months later…read moreone had gotten uneven and he came out and corrected the problem. We highly recommend! Thank you Steve!

Paul is WONDERFUL to work with, Smart, Creative, has the tools and a willingness to help you out;…read more He has a Passion for what he does and always makes you feel welcome. I had a meat tray with a hook that had fallen off, it was not an easy fix, yet he was persistent with a cheerful heart and got it done for me with a PERFECT RESULT. He will try to solve your problem then and there if he is able, and I just can't say enough good things about him, his character, his work ethic and his resullt. Thank YOU PAUL!!!

Went looking for a quote for a quick job that would take 5 minutes. After a long discussion about…read morehow great he is, and what the proper way to do the job would be, he quoted me at $150. I went next door to another fab shop and they did the job for me in 5 minutes for $10. I would avoid this shop if you're looking for a quick welding job.

These guys are the best... they fabricated some roof crickets I needed for a huge apartment…read morecommunity in record time. They'll fabricate chimney caps I give them drawings and they'll have it right away... I need a scrap of metal they go out of their way to dig through their boneyard without any dickie attitudes are millennial smart ass remarks... They really are the best and I hope they last another 30+ years that I've been using them. another no BS review from J Bossco

PCH Sheet Metal is a top sheet metal shop in all of California. Highly recommend if in need of any…read moresheet metal needs. Never had a bad experience with them. Always quality work, efficient in fabrication, and just a great group of people to work with. I always get a quote in a timely manner. Thank you PCH Sheet Metal for all your help.

I had a small welding job located in tight confined space in the interior or my car. Anthony was…read morecommunicative, friendly, and got the job done quick. Scheduling was very straightforward and pricing the job was very fair. He did a lot of preparation work before the job to ensure none of the surrounding areas got damaged. Will definitely seek Anthony out again if any similar work is needed in the future!

Anthony worked with us to design and fabricate a simple metal handrail attached to the wall going…read moreup a flight of stairs. The work was completed quickly and installed to our satisfaction. The cost which inclueded a powder coated finish the same color as the wall the rail was attached to was very fair. We are very pleased with the end result and highly recommend Hack Fabrication.

Alex has fabricated a couple of specialty metal pieces for me. He is incredibly talented. Most…read morerecently he fabricated a mounting bracket for an airplane propeller I really love. The bracket allowed me to mount the propeller on my garage wall. Alex even painted it for me. Alex is my go to for metal work and his charges are very reasonable. I highly recommend Alex and his company PELTEK!

Got my charge pipe sensor location moved to work with my newer model bmw. Was done quick and great…read morecustomer service throughout the entire process. I know it's a small job but now I get to continue with my car modifications and tune! 100% recommendation to anyone else!

Jose did an incredible job on a pretty unique project. I have Speed Queen appliances but bought LG…read morepedestals and needed them properly retrofitted to fit and secure the washer and dryer. His attention to detail was outstanding. He noticed the factory brackets weren't even all the same, fabricated the correct pieces, and finished the final welding onsite to get everything perfectly aligned. The clearance and finished fit look factory. He was timely, professional, and treated the job like it was his own house. The value was excellent too. Having something custom-built from scratch could easily have been a $3,000+ project, and Jose found a much smarter way to get a finished, custom result. Highly recommend him for any fabrication work where precision matters.

I had a problem with a bent floor on my G35 and Jose and Lorenzo did a great job straightening and…read morereinforcing the floor before installing a heel plate for me, and Jose gave me a HUGE break on his typical labor rate. The rug around the plate didn't come out that great, but I did tell them that this is a track car (and that I'll probably be gutting the interior eventually), so I'll do what I can to clean the rug up a bit for now and reinstall the heel plate. I would've given them 5 stars but for that, because they do solid metal work as evidenced by my floor fix, and Jose showed me some of the custom industrial and automotive work he'd done previously.

Our experience with Prime Fabrication was exceptional. We had stainless steel posts fabricated and…read morethe quality and attention to detail exceeded our expectations. Every part of the transaction was smooth, communication was good, and the shop dog was very cute. Highly recommend when off-the-shelf won't do for your project. See my before and after pictures.

I've had my wheels powdercoated close to the specific shade of white which is championship white…read moreway back pre covid before Thanksgiving 2019 and I was absolutely satisfied when they matched them perfectly. Thanks to Donald of Coast Powdercoating for referring me Prime Fab. Then I went back a handful of times to have my under suspension and bracket powder coated and they never failed me. Great service and they open earlier than the rest. Friendly staff.

Carlos, the owner of Reyes Ornamental Iron Works, is truly an artist. This is not just a welding…read moreshop that happens to make iron fencing -- Carlos has a real eye for design and an incredible sense of how wrought iron should look and complement a home. He was extremely thorough from start to finish, taking careful measurements, thinking through every detail, and making sure everything fit properly for installation. Carlos built new wrought iron railings for our Juliet balcony and for our newly rebuilt deck, and the difference is amazing. The new railings completely transformed the look of both areas and added so much character to our home. Carlos and his team are also just great people to work with -- professional, dependable, talented, and clearly proud of their work. If you are looking for custom wrought iron rather than something basic or mass-produced, I highly recommend Reyes Ornamental Iron Works. This really is a boutique wrought iron company with true craftsmanship and artistry behind the work.

We called Reyes to do a front gate for us, we were so impressed with everything the fact that they…read morecame right out and install not to mention the quality! Thank you for such great service I will most definitely recommend to everyone

This review is long overdue. They built us a custom screen four years ago, and it's still holding…read morestrong -- no rattles, no warping, no shortcuts. Just clean welds and work that quietly does its job day after day. Elar Welding was a great find -- one of those local shops you're happy still exists. Jorge showed up when he said he would, communicated clearly, and got straight to work. No drama, no upsell, just solid craftsmanship. In a world of quick fixes and disposable everything, it's refreshing to find someone who builds things to last. Highly recommend.

We needed someone to help us with the alignment and possible hinge replacement on our metal gate…read morethat had started sagging. Jorge responded immediately, asked for pictures beforehand so he could be sure to bring the correct parts, and arrived exactly at the time he committed to. After inspecting the gate and determining the root cause of the issue, Jorge did not want to risk damaging the gate's powder coat finish by welding on new hinges. He helped me remove the gate, talked me through several possible solutions, and we ultimately decided it would be best for me to contact the original gate builder to see if some of the needed parts are still available. I really appreciated his knowledge, honesty, and suggestions. Jorge has a great attitude, is very professional, punctual, and fair with his pricing. I would definitely use him again and highly recommend him for any gate or metalworking needs.

This company was suggested to me by my Neighborer since i liked their new metal fence and gate…read more troy's was the lowest price and finished the work sooner than the schedule. They exceeded my expectation and i referred them to do some work for my brother house too.