I am a return customer. Robert at Kar quality upholstery in Sparks Nevada does excellent work he…read morerecovered front seats and rear seats for both my 68 firebird and 66 mustang I did provide the seat covers produced by TMI and the front foams he did all the rest even some repair work on the springs. Seats turned out perfect.

Took my C5 Corvette in to have driver side seat repaired. Robert advise it would be better just to…read moreorder replacement seat covers with foam for both driver& passengers side and have him install. It was well worth it, I ordered the seat covers and foam from a 3rd party,and Robert installed. They look great,just like new. Would highly recommend KAR for any type of upholstery work, you won't be disappointed, thanks Robert!

We needed to have two wingback chairs recovered. After doing some research, we contacted Uplift…read moreUpholstery. We sent them pictures of the chairs and they promptly responded with a quote and told us how many yards of fabric to get. The quote was very reasonable so we decided to use them. They did a home visit to look at the chairs, and, after looking at our fabric, told us how they thought the fabric should be placed on the chairs. We agreed with their recommendations so they took the chairs and the fabric to their shop. We got the chairs back in a timely fashion. They were delivered yesterday evening and they are absolutely stunning! We couldn't be happier with the craftsmanship and the look of the chairs. Additionally, their customer service throughout the entire process was flawless. If you need to have anything reupholstered, I highly suggest giving Uplift a call. You won't be disappointed!

HORRIBLE JOB! This…read morecompany doesn't have the know how to do upholstery! They are RUDE and SUPER DISRESPECTFUL . We were sorry we used them. They had done such a bad job they had to come in and redo it and just put a bandaid on the problem. Yep this is a company with out the know how and respect to do RIGHT by the customer!! BEWARE!!

We picked this shop because of the stellar reviews. I talked to the owner, agreed on a price and…read moretimeframe. A two week job turned out to be 2 months. When I finally got them back, the job was poorly done. I asked about the unacceptable job, he basically told me I didn't know what I was talking about. Prior to dropping off the seats I explained in detail what I needed. I had already purchased the frames, new foam, and sewn seat covers from corvette central. All he needed to do was to hog ring the covers to the frame. I would never recommend this shop.

I ripped my drivers seat in 2023 Tucson. Mark replaced the whole panel and did a great job! Highly…read morerecommend, does great work!

Had my dirt bike seat reworked for more of a comfort fit. I wanted it wider, firmer, and taller in…read morethe rear for better support on longer rides. Troy added about 2 inches under my butt, which made a world of difference. The original seat pan was reused, and I was given a few foam firmness options to choose from, which really helped dial it in to what I wanted. The seat looks great, has solid grip, and is a lot more comfortable than stock. I was also impressed with how quickly Troy got it done. Overall, couldn't be happier with how it came out and would definitely recommend him for this type of work.

I had a small job on an old harley trike. I tried to do it myself and failed completly…read more Ace's owner "Troy" responded quickly with an estimate and was able to complete the job quickly. The quality of work is excelent and I am very pleased. Would highly recommend.

I just got my 2001 Road king solo seat done and let me tell you. WOW WOW and WOW. Not only was the…read moreprice right but art it self is amazing and the owner Jeff is funny, awesome and a nice person. Thanks Jeff you rock.

This guy's is the biggest crook ever...o.paid him $350 to putting gel pads in your bike seat and…read morereupholster it. He instead put a simple light layer of foam. I didn't realize it for several months until after. Needless to say i would really stsrt to hurt like he'll when ever I took any long road trips.I took it to another shop and they said he had indeed had not done the work of paid him for.

Audie did a horrible job on the seats for my 58 Karmann Ghia. I told him I wanted the original…read moreseat covers duplicated and I pointed out details I wanted to retain, like the thin piping and not using any hog rings. Audie assured me he could make them exactly as original and he would make the piping from scratch, so it would match the original covers and he would hand sew all the side corners and bottom of the backs. I made an appointment with him and dropped off the restored seat frames and left him with the original seat covers to copy and sent him a few photos of the seats before the covers were removed so he could copy the hand stitched sections. I also provided him with special order vinyl from SMS farbics in Oregon to match the original vinyl. Audie said it would cost about $2k, so I dropped the seats off on October 6th and he told me they would be done by the end of the month. I called back in November and he said he was almost ready to work on them. I called back in early December and he told me he would get started on them. A week later he told me they were done. It looked like he had slapped them together in a week. He used fat off the roll piping and didn't make it from scratch. He used hog rings to hold the seat back on. He put a seam in the middle of the front panel and on the top of the back, these seams were not on the original covers. There was a lump around the top of the seat bottoms and wrinkles around the base of the seats. I don't think he looked too closely at the original covers. After all this he wanted to charge me $3,800! I showed him all my issues and he told me he would redo them. I called SMS and ordered more vinyl which cost $1k to replace and the dye lot was slightly different and I already had door panels made using the original vinly. At this point I couldn't trust that he would do the job right and I couldn't loose another $1k in vinyl. I told him I wanted my $2k back that I had already paid him and I would eat the cost of the vinyl. He told me if I removed the covers and brought them back he would refund me. I removed the covers and brought them back and he told me he didn't have the money, but would in two weeks. I went back to his shop every two weeks for three months and he never had the money and wouldn't refund my money. I told him he could even pay me back in installments. Nothing. Now I'm out $3k and still need to get the seats covered. You might say that the seats looks ok, but they are not what I asked for. I was completely up front with what I wanted and I provided original seat covers to duplicate and he promised that he could do the job right. In the end all he did was a quick slap it together job to get it done and wanted to charge me double for poor work.

They were great, my '89 Corvette top wouldn't go up and they fixed it right away and at a…read morereasonable price. Super service.

Champion Upholstery performed outstanding work. Excellent service and very professional. The owner…read moreDick rebuilt my car seats front and back for my 1961 buick lesabre. Worked with me to develop and redesign the door panels. Hands down the best work and service I have seen in Reno, highly recommend. Checkout the photos, custom design, hand crafted top notch work. I have a one of kind design made by Dick at Champion Upholstery. "5 stars all day". Thomas

Awful, just awful! Extremely Rude! Don't suggest dealing with this place. I have no idea how this…read moreplace is in business with how rude they are!

Just completed work on my 1968 Camaro Z28. B&T was recommended to me by Steve's Upholstery…read more Vehicle was a nut and bolt restoration that came out of Wyoming/Elko Nevada in 2017. I knew there were some issues with the vehicle when I purchased it. Steve's Upholstery took care of the majority of interior issues when I first got it. After putting some miles on the vehicle over three years, I took it to B&T for front brakes, emergency brake work, divorce choke install, install tach, speedo fix, and extend seat slides. They completed this work and had some observations/recommendations which follow. Next stage was to fix head gaskets, header gaskets, timing chain gasket, rear seal, and differential leaks. Did a pressure charge on the cooling system prior to work to confirm leaks. Tore down the engine, and inspected oil pan. Discovered paint residue and metallics in pan. Main Main bearings were scored, so authorized replacement. During reassembly they upgraded minor components they thought should be done (oil pressure switch, fuel pump push rod). During one of my inspections during work, we noted that there were some exhaust leaks at the muffler welds and other points. They dissasembeled, cleaned, and rewelded at a number of areas, repainting after the work. Mason and Leighton were very communicative through the whole process, and requoted work when items were added. Took care to use correct components to retain originality of car. Great shop!

Was employed there for one year and eight months. Have never worked for a family run organization…read morethat was so corrupt. Best way is to let the customers tell it...check out the Better Business Bureau's website for B&T Custom in Sparks Nevada. Right now there are 4 1-star ratings? Those customers descriptions of what has happened to them, as well as the way that this family treats their employees, in my opinion is the tip of the iceberg. Dangerous and illegal workmanship is being pushed out the door. My refusal to go along with it, led to my termination on a Trumped up Complaint that is nothing short of an outright lie... one of dozens upon dozens. Do business at your own risk with these people.