I bought one of the early model Bushmaster BA-50s. If you haven't had the displeasure of pulling the trigger on one, I'll tell you what it's like: STIFF! It's almost impossible to press the trigger without moving the rifle off target. ( the gun weighs 32 pounds and sits on a bipod! ) Needless to say, I was very disappointed that I paid $5000 for a rife totally capable of 1000 yard accuracy, but with a trigger that made it impossible. I emailed Bill, he responded within a few hours with : Sure I can set you up, I get to about 3.5lbs with a nice smooth crisp break, price is $59. I need your trigger, hammer, and their springs. Price includes return shipping, cash or check is fine. Now, I know what you are thinking.... $60? there is no way that's legit. He's going to ruin my trigger. ( I thought the same thing. ) After doing some reading and research, I risked it. I sent him my trigger and a few days later it was back in my mailbox. Insanely fast! I reinstalled it, held my breath and pulled the trigger. It caught me totally of guard. Its unbelievable. No take-up, no creep, just a sudden, smooth crisp break. I literally laughed out loud. Mine came in it at right around 5 pounds on the gauge, but it feels much, much lighter to my finger. (i'm not sure how accurate either are) Honestly, I wouldn't want it to be any less. I was a little worried about safety, so I did the very scientific "slam the butt of the stock into the ground really hard" test. It passed. The hammer didn't jump the sear. Now I can really try and see how far the gun can reach out. Thank you Bill! TLDR: Bill is a master at trigger work. He turned my unshootable rifle into a tack driver. He really should charge more ;) read more

Did a paddle mag conversion on my C-93, great job. He also did the trigger on it and on an AP-53. Both are excellent.

Bill performed his trigger upgrade on my PTR91, added a paddle mag release and a heavy duty buffer as well. Good communication, quick turnaround and I'm pleased with the results. Recommended. read more

Browning BL-22 New it came with a 7~8 pound trigger. Bill said 3~4 pound trigger no problem. It was. Came back from him with a 6~7 pound trigger. I sent it back to him. Second attempt returned with a 5~6 pound trigger AND frequent failure to fires. He won't see it again. read more

Excellent communication, amazing work and fast turn around... Thank you Mr Springfield!!

Sent my cz p01 for trigger work the gun came back identified as full auto semt the gun back 3 times without any improvement. Now cz customs says the sear was destroyed with a file. Search not available brand new gun not safe. No help from Bill at all. Maybe In the past he was good but my experience is horrible read more

Had 2 trigger group from Bill, It was just amazing what he can do for a PTR-91. The service and shipping time was excellent. The money you spend on his work is worth it. read more

Bill knows his stuff. And the turn around is stupid fast. He's worked on PTR 91, HK USP, HK SL5 and a G36 clone for me. He's great!

I found Bill on a comment from a YouTube video talking about how great his work is on M&P Compact 22. I picked up one in December and liked everything about it except the trigger. Bill was easy to contact by email and I asked him to lighten the trigger pull as much as he believed would be safe. The turnaround was unbelievable quick and the trigger pull weight was reduced to over half as the original amount (just over 6lbs to 2.5lbs). I tell everyone I meet at the range or in line waiting to buy ammo about Bill's work. There is no reason to get used to a bad trigger when Bill can work his magic. read more

Bill Springfield Trigger Work - M&P Compact 22 - Local Services Near Me - Colorado Springs, Colorado

Honest, fast, dependable work. Excellent work on my FAL trigger. Smooth, no grit. Clean break at 5 lbs. Highly recommended.

Overall, super knowledgeable and excellent work. HIGHLY RECOMMENDED!!! I sent in my USC trigger group for an action tune and trigger work and received it back in just over a week. Upon initial dry fires the take up was greatly reduced over stock, the break like glass, and reset short. I can't wait to take it out to the range. He is a gunsmith wizard and his prices are more than reasonable (so much so, I felt like I was ripping him off). I will send all my future HK work to Bill. read more

Bill has worked on three of my guns, and done outstanding work on all three. He has a great turnaround time, with great packaging for your firearms to keep them safe. I would not hesitate to have him work on my next firearm in need of a trigger job. Thanks Bill Springfield! read more

Bill did an absolutely amazing job on my USP. He took the reset from terrible to amazing and had it back to me in a week. I highly recommend Bill for any job you may have. He is reasonably priced and does great work. read more

Did an absolutely great job on a TommyBuilt G36 clone trigger. Before, the trigger was so heavy it would leave marks on my finger and it was so unpleasant. Got into contact with Bill, and he was very straight forward. Told me to ship it to him, what the cost was (very reasonable price) and his turnaround was very quick. The pull is noticeably lighter, I mean it's night and day. I actually enjoy taking it to the range now, I couldn't be happier! read more

I Received a tigger Pack from from Bill. I couldn't ask for anything better. It far exceeded my expectations. No Creep, Crisp, Light. It is very nice. Bill is a true artist. I sent him an email he called me back. I told him what I was looking for and he sent me exactly what I asked for. I am thinking of another HK project I would like him to do for me. Bill is a consummate professional every one of our interactions were enjoyable and helpful. read more

Bill did an excellent trigger job on my Walther PPS M2. It went from creepy and heavy to buttery smooth with a clean crisp break and reset. He was easy to reach by phone. One week turnaround at a reasonable price. Highly recommend! read more

I have an S&W M&P 22 Compact which I bought to economically emulate the feel and function my larger caliber S&W M&P pistols at the range. With ammunition prices being what they remain to be, I wanted to use the pistol at the range more often than before ammo prices skyrocketed however the trigger, while functional, was not nearly as crisp as the upgraded triggers on my other M&Ps. I could not find a trigger upgrade for the S&W M&P 22 Compact anywhere so I turned to Bill to work on my trigger. The results are phenomenal. Crisp and clean break at reduced pull weight have made this pistol a pleasure to fire. Low cost, quick turnaround and professional quality make Bill's work a package I would recommend to anyone. read more

Had a ptr trigger pack worked on years ago and the result was fantastic. Crisp 3ish lb single stage. Night and day improvement

If you're going to get your Remington shotgun trigger worked on he's the man to see.. dropped my pull down by half. Clean and crisp trigger pull couldn't ask for better! read more

Bill does amazing work, I have sent 3 projects to him and all came out really nice, I highly recommend his services!

Bill installed a SRT kit and trigger job on my Sig P239. It had a 5 pound trigger pull in single action and Bill got it down to 3 pounds 12 ounces. This improved my accuracy by about 70%. Very fast turn around. I shipped to him last Thursday and got it back today (Wednesday), less than a week. I highly recommend him. read more

Recently dropped of my Century Arms C308 for trigger work , new buffer, and recoil spring. Trigger pull is now 111.5 to 12.5 lbs. (using a Lyman electronic scale). Multiple calls and emails and no reply. Spent $270 for this- not a good deal. read more

Sent him two guns. He ruined the triggers on both. A Rock River AR with the RR 2 stage NM trigger, and a 10/22. The RR trigger he left in a state that I had to finish the work on it he started when he sent it back. It wouldn't even fire. Onthe 10/22 he lightened the trigger and also did something to it that made it fire when you took it off of safe. He should not be doing trigger work. He has an array of mixed reviews. Maybe you have to catch him at the right time for things to work out. read more

Excellent work on my beretta neos trigger, shooting the highest scores I've ever gotten.