Knowledgeable and professional staff, great place to do FFL transfers…read more Large selection of new and used items to browse for.

they tried to give me less than $100 for a brand new mossberg 270 they will buy a gun for $300 and…read moresell it for double the price the bought it for. worst place to sell you're weapons

Mike is great. I had a small issue with the wrong part and he brought it up immediately. Would…read moredefinitely do business with again. Great price for the work requested

Great gunsmith! My Colt 1911 was in need of overhaul/restoration and Mike came through huge. Very…read moreeasy to contact and work with too. Highly recommend.

I brought my gun to Victor to take a look at it, he was very knowledgeable, willing to help and…read morefixed my gun in 2 min! I am really impressed with professionalism in this shop and specially Victor who is professional, respectful and generous!

I like it here, called on a Friday and he was able to inspect and service my shotgun Saturday…read moremorning. Went above and beyond, thanks!

I used to come here with my Dad as a boy and then later as a young man. The selection of rental…read moreguns was always sufficient as was the ammo and paper target selection. Pricing is market standard and therefore fair. The staff was always helpful and courteous. I now have my own family and live an hour north of Bullet Trap in Plano, so we typically go to another range up there. But whenever I'm visiting my Mom and brother in Garland, we go to Bullet Trap and always have an enjoyable experience.

I have attempted to take their Intro to Handguns class on 2 different occasions (within 3 weeks…read moretime). The first class was cancelled and the only way I found out was that I called to confirm. They had my phone number and never / didn't call to inform me of the cancellation. STRIKE 1 I rescheduled for today (08/14/26). I arrived 15 minutes early only to find out there was not even a class scheduled for today!! STRIKE 2 In this situation they are not getting a 3rd chance. I will NEVER do business with them and will share my experience with everyone I know

Had a great introductory class about gun safety and handling, looking forward to going to the range…read morefor the next step!

From the owner: We offer special order guns, bulk ammo, accessories. We also offer gunsmithing. We do not currently…read morehave an active store front so orders and gunsmithing drop offs are by appointment only.

Great organization! Really enjoy patronizing this business. Facility is modern, clean, well…read moredesigned. Customer Service is excellent. Have shot there several times and also used their gunsmith on two occasions. The owners are also very friendly and listen to their customers concerns. Can't say enough good about this business

Not a good experience. The whole place is shrouded in arrogance and condescension. Matt is a real…read morepiece of work. One and done. I hope others have the good sense to go elsewhere. Better take the drive to Sherman to BPS. It's worth the drive.

About a week ago, I was in need of some relatively minor gunsmithing. I had attempted to remove a…read moreflash hider that was really torqued on and believed I had loosened my barrel. Knowing that there can be issues if barrel/bolt face headspace gets off by too much, I decided it best to have a gunsmith re-torque everything to specs. I submitted a quote request via Yelp* and within a few hours I received three replies. The first came in at $40 for the fix, the second - which was Barnestormers - quoted $75, and the third just said gimme a call and we can talk about it. Riiiiight... Because Chuck of Barnestormers mentioned the possibility of my having sheered off the barrel index pin, I decided to go with Barnestormers. I figured that if I had sheered off the pin, I would at least be in good hands, thinking that Chuck is going to do a thorough check to make sure everything is as it should be. Chuck is friendly enough. He conducts his gunsmithing operations out of his garage which, as I shared with Chuck, reminds me of my own garage, wherein I place something and then can never find it! Chuck did find everything he was looking for when I was there and, while I could criticize his operation and seemingly disorganized workspace, I was grateful that he was cool with my being present while he worked on my AR. Foremost, let me say that Chuck completed the work on my AR in relatively short order and I am happy with the end result. That said, I was disappointed that as Chuck attempted to remove my barrel nut and delta ring, he damaged the barrel nut significantly by breaking off a tooth or two; really making it an ugly mess! The teeth on the barrel nut were damaged because Chuck lost control of the barrel nut wrench when attempting to loosen the nut. In his defense, the nut was seriously tight, but I think with a bit more care, he would have been able to remove the nut without actually damaging it. And, it probably wouldn't even have phased me, and I likely wouldn't even mention it here had he had a nut on hand (new or otherwise) to use as a replacement for the one he damaged. Or, since he did not have a barrel nut on hand - just in case... that he would comp some aspect of the parts and/or labor on my repair work. Instead, Chuck produced a complete new handguard with barrel nut included as a prospective solution, the acceptance of which would result in somewhat of a configuration change on my AR annnd an increase in costs. Because I did not want the damaged barrel nut put back on, only to end up feeling the need to replace it and incur further costs in the future, I opted for the new "furniture" and to have the issue solved while attention was being given and money being spent. Chuck quoted me $90 for the new, 10" UTG free float handguard, which I trusted and now know was a decent price. The main issue I take with my experience and the main reason for the less than stellar review here of Barnestormers is that, I calculated $75 for the labor and $90 for the new handguard. So, $165 out the door. And, while I did not specifically ask for it, I did make mention of being a disabled veteran and kinda hoped Chuck would feel compelled to offer a nominal price break for my military service to our country. But, when I asked for a total, Chuck said $200. Now, because I am the type of person who chooses not demean another man's worth, I paid the $200. I just felt that there was a bit of a bait and switch of sorts and that, if anything, there should have been a discount off that quoted for my being captively motivated to accept the new handguard and consequences of what I perceived to be Chuck's carelessness. In the end, each of us weighs different aspects of business differently and you very well may disagree with me on this one, but if you decide to go with Barnestormers Armory for your gunsmithing needs, consider yourself informed! I know for myself, I personally will shop elsewhere next time. Live well. Be well. Cheers!

I needed the services of a good gunsmith to rebuild a Browning SA22 for me. I had taken the rifle…read moreapart wrong & had lost a couple of the parts. I ordered the parts myself, but I wanted someone with more experience than me to put the rifle back together. Chuck got the rifle back together in record time. It came apart while he was demonstrating the repair & he had to reassemble the gun again. He accomplished this while I was there & made sure it was working correctly before I left. He did a good job, he was competent & friendly. I recommend his services & will use his service in the future.

I recently took my rifle to the gunsmith at Frisco Gun Club and had an outstanding experience…read moreworking with Donovan. From start to finish, the communication was top-notch; he provided clear updates at every stage of the work, so I was never left wondering about the status of my gear. Beyond the technical skill, Donovan's expertise is evident. He suggested a specific change in the grain of ammunition I was using, and he was absolutely spot on--the performance difference was immediate and impressive. It's rare to find a gunsmith who is as communicative as they are capable. Donovan is a great asset to Frisco Gun Club, and I'll definitely be back for any future maintenance or builds.

Came in expecting a professional and welcoming experience, but the front desk made things…read moreuncomfortable almost immediately. I was asked multiple times if I knew how to use my firearm, even after already answering the question. I understand safety is important, but repeating it over and over came across as condescending and unnecessary. The staff overall seemed more focused on making assumptions than treating customers respectfully. A little professionalism and better communication would go a long way.