Here goes. To put simply. This place sucks! Took in two Echo…read moreCS370's because I couldn't get them to run correctly after changing spark plug etc myself. Told them I didn't want to spend more than $200 total but was ok spending that much if both saws ran like near new again. They verbally said total should be around $125 unless something was really bad. So 3 weeks after they said they should be done they said one was finished. It's total was $98. Then I'm told they could work on the other saw because the handle was broke so I agreed to let them fix it. No biggie as handle is under $35. When that saw was done it was $132. Here's where it gets good. The one saw is missing the oiler screw that I thought they were going to fix. Nope. The pull rope doesn't go all the way back in. Didn't look at that either. So WTF did they do? They "looked" over the entire saw and changed the spark plug and gas filter. That's it. So for not $125 but for $230 I basically got a new handle. I can change the spark plug in 2 minutes myself. And how the crap does a chainsaw repair shop NOT see the oiler screw completely missing, do they not test the saws for proper lubrication? I for sure thought they changed a carburetor (or both). Or at minimum had to adjust the carbs. Not sure how one can charge that much to change 2 spark plugs and 2 gas filters on a freaking chainsaw with a straight face.

I wish I would have read comments even though old. Was pushed ahead after 3 weeks was told fixed…read more(30in scag walk behind) tried using 3 times then would not start. Took back since not fixed. Anther 5 weeks told had to replace carburetor, just tried using again after 2-3 times doing same damn thing. Over it 8 weeks money out and still not running

No matter my issue, the experience is always top rate. When its an emergency, they find me whatever…read moreI need whether large or small. If its service I need, someone is here in a matter of minutes. Employees always make me feel I am their their best customer. I love doing business with Tri-City and tell my friends. They all know so much.

They were able to find a great washer, fair price, honest, delivered timely and installed next day.read more

I initially came to Cashway Ace to have a new car key made (yes, they do that!)…read more They ordered my new key and it took a little less than a week to come in, I spent about 20 minutes finding new tools I couldn't seem to live without while they programmed my new key. The price was very reasonable and the customer service was magnificent. They have a large and awesome variety of tools and materials. This is definitely the place to go first for supplies if you have a project that needs doing. I've since been in for AC Compressor coil cleaner. They were less expensive than Amazon AND I was able to clean my compressor coils today. There is even lively and interesting political discourse you can participate in going on behind the counter. Thanks guys (and at least one gal) for all of your help! I'll see you soon!

Needed to replace a busted toilet seat, and the boys working the desk were very helpful and…read morefriendly. Got me squared away and even helped me and my toddler find a lost shoe in the aisles. This is a great small business that really makes you feel like you live in a good town.

The service was excellent. Laura at the front desk helped me figure out exactly what I wanted. Jake…read morewas also really nice and helpful. I really appreciated their services.

I walked in yesterday with a pretty simple need to have some modifications done to a table footing…read more Jake knew exactly what i wanted with minimal explanation, was quick, friendly and took care of me on the spot. Overall it was a great experience.

So very affordable and helpful! Went in there on a busy day she was with another customer dropped…read morewhat she was doing showed me the part I needed and I was on my way.

They fixed and cleaned my Dyson ball vacuum quickly and reasonably priced…read more If I need any other services I'll definitely be back.

I contacted a number of people to get a quote on installing a vent hood that needed to be vented to…read morethe outside. One outfit was going to send someone over but would charge $75 for the estimate but would roll that $75 into the job if I chose to use them. Pro Fit didn't play these games. They said they would come over to give a quote on the price. Don showed up EXACTLY when he said he would. He gave me the price for the job and I agreed on the spot. We scheduled the job and Don showed up 15 minutes earlier than scheduled and did the job with his brother Ron in the exact amount of time estimated. They cleaned up after themselves and did a 5 star job on the install. Just a word of warning Pro Fit only takes cash or checks.

Thank you, Don, Ron and Mike of Pro Fit Installation for taking care of us. We appreciate your…read moreservice and professionalism regarding a somewhat small and quirky installation situation. Our old electric 30" cook top conked out a week ago, so we decided to order a newer model. It arrived, and it was quickly discovered that the new 30" unit would not fit into the existing 30" cut drop-in hole. So we needed some cutting in addition to the hook-up. Now, mind you, this is a vintage (ca. early 80s) Formica counter-top we're dealing with -- easy to scratch and crack -- so we were leery of taking on this job ourselves. Called around, had some people come out (they very honestly said they wouldn't touch the project), but only after having Don's team of Ron and Mike come out that we got the issue resolved. They had no angst about cutting and matching the dimensions of the counter-top to match the cook top's. Measured, cut, sawed -- TA-DAH! They dropped the unit in, got it hooked up, and voila: we are once again happy with our home. All at a very reasonable price. Don did come from the referral of a contractor who came out and wasn't able to help us, and that's perfectly all right -- this particular contractor was honest about it, and I appreciated his candor. He personally put me on the phone with Don, got all the specs taken care of, and we went from there. Also, while Don himself was not available to show up for the job, his crew did show up as promised (earlier, in fact), and stayed on point (project, amount of time, price) the whole time. They took one look at the project and said, "We can get this done." And they did. All in all, less than an hour from start to finish. And plus-plus points -- they cleaned up not just their own mess but a mess made by others before them. Icing: Don called me after-hours today to ask how things went. What a pro! I loves me some follow-up. Those, to me, are excellent CS skills at their best. So, thank you Don, Ron and Mike. We really appreciate your service and your quick turnaround, especially at this time of year. You're in our phone contact list now.

I had these guys make some custom parts for an aircraft tug, and they knocked it out of the park. I…read morewasn't sure if I'd be able to use the tug again, as the parts are so specialized. But these guys made it happen.

I design and build analytical testing laboratories through the US so know quality fabrication and…read morewelding work. I brought a project to Astro Mechanics and was very impressed with their service and work. Jeff worked through the design with me, sent me drawings, made some changes, and then built it. The welding was top notch, choice of materials (thickness of wall, etc.) was spot on, and everything was perfectly straight. Nothing but good to say. Use them.

These guys were great! Husband and wife operation. I was mowing my lawn with my riding mower and…read moreran into a curb which dented my deck and wouldn't allow the blades to spin. I tried hammering it out but had no luck. They came the next morning and got the dent out and helped me reinstall the deck as well. I was skeptical because they only had 1 review but I had a great experience!

Came to me. Fixed problem quickly and for a good price. Excellent service and would call again.read more