Had an excellent bike fit experience with Ed Sassler. In addition to adjusting my cleats and bike…read moreso everything fits correctly and I'm using the right muscles, he explained a lot about the relevant biomechanics, which was both interesting and helped me know what to keep an eye out for in the future. The bike fit also included in-depth pedaling instruction and Ed picked up some bad habits I had and helped me learn what it feels like to have my center of mass in the right place. I came in experiencing shoulder pain during long rides and after the fit session that's almost completely gone away from the combination of adjustments and instruction. Definitely recommend getting a bike fit with Ed for cyclists of any level.

My road bike fit with Ed Sassler was superb. I'm return to cycling after a ski crash, and he was…read morevery thorough in problem solving how to accommodate my torn hip labrum and many asymmetries. I'm now cycling within my range of motion and training far more comfortably. He's also a phenomenal educator -- I left the session a better cyclist.

I don't know anything about Trek-brand bicycles, but they service other brands of non-electric…read morebikes here and the service is great. They seem to pretty reliably get your bike back within 24 hours, and they diagnosed a tricky problem and came up with a very reasonable solution. They definitely seemed to know what they were doing. It didn't feel like they were trying to get the work or the cost up. They used parts I brought in. Parking is obviously easy in the huge shopping center lot.

By far the best service at a bike shop I've gotten in the Boston area so far. Prior to this, I had…read morebeen going to Belmont Wheelworks and being demoralized each time by the lack of acknowledgement or help (guess I'm not their target demographic). Seriously considering taking my (non-Trek) bike here in the future for any repairs or maintenance. We were heading back home when I got a flat right in front of Trader Joe's across the street. Thankfully my husband remembered there was a Trek in the nearby plaza. The guys in the store couldn't be nicer! My tire was fixed, my pressure was upped, and I was back in business in less than half an hour. Addison in particular was really kind and didn't make me feel dumb for asking a question. Superb customer service, not enough good things to say. Also, if you're any sort of trail nerd, the store itself is pretty cool with photos on the walls of nearby trails laying out the distance and route.

I'd caution anyone against buying a bike here…read more I went in fully intending to leave with a mountain bike. I had narrowed it down to two models, and the sales associate (Eric) was great. He helped me find the exact bikes for my needs and offered to build my top choice so I could test it out (it was a difference size than what they had on the floor). Everything was great until the owner, Charles, came over. He totally tanked the sale. He forbid his employee from taking the bike out of the box and told me I had to drop $1,000 to buy it before I could even sit on it. Unbelievable way to do business. Charles didn't just lose a sale, he lost a local customer who was planning to bring three bikes (including an e-bike) there for service. After meeting the owner I wouldn't trust them not to rip me off. We went to Landry's instead and had a much better experience. Avoid Casa/Amped.

Just ordered my e-bike at Casa Bikes and want to do a shout out to Daisy. She was extremely helpful…read moreand knowledgeable about the e-bikes. Highly recommend this shop.

Came in with a service problem, needed a bar to be bent back in place. The onsite technician,…read moreBrian, had me out the door in under 3 minutes. Couldn't be happier with their professionalism and ability to solve my challenge in no time. Thank you!

Wonderful local bike shop with a great vibe. Jim and the crew are really friendly and helpful. Bike…read morerepairs are fairly priced and they really know what they are doing. Jim really took the time to find out what I wanted and needed repaired and upgraded. He was very communicative during the process, letting me know when there were issues encountered that were unexpected. It gave me the sense that they cared a lot about the work and their customers. Plus they sell some lesser known and smaller bike brands (along with well known ones) that is a nice change of pace from the big brands often seen at other shops.

There's a lot of old negative reviews, so I'm feeling the need to add my 2 cents. The team here…read moreworks so hard to help you find the right bike for your kiddo. They size them and have a test lot out back to ensure comfort and fit for their needs. Their pricing is probably higher or on par with other spots, but it's the price you pay for the level of focused customer service. With that said, a few notes to be aware of: - they do not carry Trek (space limitations) - it will take time. I figured we'd be in and out, but it's a smaller space so it takes a bit of patience to maneuver within - budget an hour or so if you have a confident rider and know what you want, more if tentative - the folks all seemed like they were working their darnedest to keep everyone happy and taken care of - you don't get that every where nowadays. There were 2-3 families each time we dropped by, so it's a hidden local gem. Help keep our communities local and visit spots like this instead of the big box retailers.

At Wheelworks you never know what you are going to get…read more I have had the best, friendliest, most knowledgeable people help me with purchases, fittings, and service. But they completely messed up shipping my bike to California for a long distance trip (I gave specific directions for the date it needed to arrive - they let my bike sit in the shop for three days and then shipped it the slowest possible way - it did NOT ARRIVE IN TIME FOR MY TRIP!!) They took NO responsibility for any of this. Sometimes they act as if you count for nothing if you are not a "serious" cyclist. I've been ignored, demeaned, talked down to, walked away from. You never know what you are going to get!

blah. i've been here three times and had a lackluster experience each time. either ignored or…read moregrumped at. Brought my bike in to the owner to get a minor fix and they did a quick bad job charged me a lot then did not address it when i brought it back. most importantly as a community bike shop i didn't feel like they cared much about the community. what's the point then? bummer. I tend to go out of my way to not go to this place. check it out you may have a better experience.

When Choosing the right bike shop,you should be looking for direct customer attention,reasonable…read moreprices,quality of product and many more things. With Quad Cycles,you get everything you deserve and nothing false about that! I'll never need to visit another bike shop! thanks to Rustem and Rodell

Would have given them 6 stars if possible. These wonderful people ROCKED! We were just two confused…read moregirls who are new to biking and the staff at Wheelworks brought their A game, honestly show stopping. We recommend everyone bringing their questions and bikes to this establishment. We WILL be back.

Used to frequent this store years ago. Then went with Hubway/Blue Bikes for a decade. Now have my…read moreown bike again. Needed a new chain, old one felt worn and loose, measurement confirmed it was. Now, I have a Shimano internally geared drivetrain. It looks they choose to install a (1/2 x) 1/8th KMC chain. This is something one can question - the situation seems to be this: multi (derailleur) gear drivetrains, like 6, 7 or 8 speed drivetrains use a 3/32th chain - single speed bikes often use a beefier 1/8th drivetrain with thicker sprockets/chainwheels. Now, Shimano uses 3/32th sprockets for their internally geared hubs. Now, one could pair a 1/8th chainwheel designed for single speed or one of those stylish BMX chainwheels to pair it, that are thicker 1/8th. If one does that, one wants to use a 1/8th chain. However, my bike, like most that was designed for internally geared Shimano hubs, uses a regular 3/32th wide chainwheel that would be compatible with derailleur geared setups as well - Shimano designed it that way, probably to make logistics simple, makes sense to me - go Shimano. Now, why it was decided to install a 1/8th chain - no idea. Reading up says one can install a 1/8th chain on a 3/32th sprocket/chainwheel setup. One can expect a little more wear over the long run on chainwheel and sprocket as it doesn't fit as well in width, maybe also slightly more "noise" (not a problem - if there is, nothing I'd notice) etc.. Ok, so maybe not optimal and I'd expect a store like this to put a "proper" chain on it - it's not that difficult, is it? I suspect money might be a reason, the KMC 1/8th chain is inexpensive, goes for 5.99 on the KMC website, whereas 3/32th chain seem a bit more expensive, maybe because they are longer as they usually come for derailleur setups. I paid the same price ($25 for chain plus approx $20 for installing it) though as a derailleur bike would have been. All of this - may that be as it is, wouldn't necessarily have been a big deal. BUT there was a problem - they didn't use the right "magic"/"missing" link to join/close the chain. I had constant trouble, the chain dropped frequently, originally maybe once a month/3-weeks. I went back to the store and reported - this didn't happen before. They blamed "maybe" the control wire or housing needed replacement causing this. I asked how would that possible have an such an effect? blahblah... 7 month later the chain broke - and it was not the chain itself, it was the missing link - and it broke as in the rivetted axle part broke out of the side piece - it was not that the link came apart at the removable/undone-able side, the link was destroyed. I went back to the store to buy another link as I figured the chain itself seems ok - if I just replace the link I should be good. So I went in and the associated said they don't carry missing links for KMC 1/8th chains. I stated but I had this done here. He responded yes, they sometimes use KMC 1/8th chain, but they don't carry the KMC (or any generic) 1/8th "missing link" joining thing. So I had to buzz off without accomplishing my goal - but I wondered - how is this possible/ They install a chain on my bike that they say they don't have the proper joining thingee for. So I walked to the next bike store (Bike Boom). I went in and asked for a KMC 1/8th missing link - and they had it. Looked completely different from the one that was on my chain. The pin length was different as well - when you take a half of the magic link I had and the double pin portion of the "missing link" and hold them together. I went back into the store and asked - are you sure this is right - this looks completely different from what I had. i had the chain in my bike basked outside the store. The associate came out with me, looked at what I had and said - you have a multi-speed (derailleur) 3/32th link on your chain - that is not the right one. The one I gave you is the right one! Turns out he was right. I installed the chain with the new link he had given me - and all the problems I had before seem to have disappeared. No chain drops anymore. No funny noises/"klonck"s. No (extreme) sensitivity of chain tension apparently related to chain drops anymore - now apparently trouble free operation. This also explains why the link failed and the way it failed and the answer of the attended of not having such a link. So they use the chain and then use a different link for different chain types that kind of initially kind of fits as in it seems to join the chain together, but then causes a lot of operational trouble and prematurely fails. The combined time I wasted with dealing with these failures like chain drops over this 7 month period is probably a day's worth - including the time I went back to the store and reported that something doesn't seem right; I now frequently have problems I didn't have before. To get a bullshit answer and would have incurred additional cost for "bogus" follow ups if I had gone for it.

10 STARS!!!! I spoke to Owen, who helped me diagnose and repair an issue on my daughter's Schwinn…read moreAdmiral, and I couldn't have asked for a better experience! I couldn't recommend this place more highly. This is everything you look for in a local bike shop - staff who are helpful, approachable, look to work with bike owners and enable them to do basic maintenance at home, while remaining available for the maintenance and repairs at the shop!!!! This is an absolutely stellar shop. Very few of these are still left, unfortunately.

I had my eye on a bike for a week or so, before deciding to go ahead and order it online on Monday…read more. Said "in stock" and available for pick up in Danvers Tuesday morning or seabrook Wednesday morning. (Danvers was closed Monday). I chose to pick up in seabrook Wednesday since we are in NH and couldn't get down to Danvers Tuesday anyway. My confirmation email said "ships from western cycle" to seabrook location. My receipt was from the Danvers location. I got a call Tuesday at 5:30pm from seabrook saying that they didn't have the bike I ordered in stock at either location. I explained what my confirmation email said and the very sympathetic employee from seabrook said he would call Danvers so see if they had put the bike aside without his knowledge. Danvers was already closed for the day so he offered to call and get back to me in the morning. 10:15 Wednesday I get a call from the owner, with a big attitude, telling me that they don't have the bike. Zero sympathy or compassion for me, the customer. He claims it was in seabrook and must have sold right before I ordered but doesn't know when. I was obviously upset, having ordered Monday and only finding out two days later that they sold me a bike they didn't have. The owner acted annoyed that he even had to call me and said "I don't know what to tell ya". He offered to cancel the order or order the bike (which would come in 7-10 business days), but we are leaving on vacation and needed a bike sooner. He said "sorry" like he was forced to, and was just overall not nice to me. I would recommend Buchika or Philbrick's for your bike needs. Philbricks went above and beyond and legit built a bike for us same day (normally a 2-4 day turn around) so we'd have it for vacation.

Was in the market recently for a Yakima part that happened to be discontinued, and had a very short…read moreperiod of time to find one before leaving for a few days. Evan found the part for me after calling his colleagues in East Providence and asked them to hold it for me. The part was waiting for me when I walked into the RI store the following day. Appreciate Evan's effort, his attention to detail, and their communication. Great job all around. Highly recommend both stores....awesome staffs and great teamwork!!

They were my go to supplier for bike parts, however, they are in decline. The display no longer has…read morethe pegboard of various small items like chain links, chains various hardware, tubes. you have to ask then it is iffy. They are mostly into selling bikes. Seen better days. I now have to go to ordering parts online.