If I could give zero stars I would... these people are absolute crooks. They charge twice what a…read morerepair costs. And then "claim" they personally worked on vehicles to account for tremendous labor charges when they have teenagers who certainly not certified and probably don't have a license work on vehicles. If they quote you $400 be repaired to pay $1,000. A whole family of Karen's run this place. The lady in the office will boldly lie directly to your face. It's idiots business like this that ruin peoples trust in humanity. It's a junk facility ran by junk people in a junkyard..

DO NOT USE THIS BUSINESS…read more I have had the most horrific dealings with this company. Business claims I was "cut a break", I disagree. I called this morning after a tow for a vehicle that my son was driving that had ran out of gas at mile marker 5 on highway 97. As you can see, vehicle was picked up and dropped off at the same location. I will say the vehicle was legitimately moved a few feet as it was across the fog line into the northbound lane. Vehicle was dropped after I paid and the driver was gone at 0130 yet I was billed until 3. In the call this morning to said company, I questioned the times billed. The lady I spoke with was instantly hostile and said that I was "cut a deal" and that she was going to now charge my card $800.00. I informed her that was illegal as the receipt clearly says one amount and she can not charge my card more and that if she did so I would dispute the amount with my credit card and press charges against her. She then explained the they bill by the hour from the time they are dispatched until they return. As the receipt shows, dispatch was at 1241. At 1249 I was called and notified that a tow truck was called. I drove to the location arriving at approximately 0120. I was told billing rate was $250 an hour but would be "cut a break" I paid and driver dropped vehicle and was gone within 10 minutes. I put gas in the vehicle from a gas can, spoke with the WSP trooper and drove into Goldendale and filled the car and the vehicle I was driving. I then stopped by my bank at 0200. If the call was dispatched at 1241, driver was gone by 0130 after having sat and waiting for me to arrive, there is no possible way he was out until 0300. I was then told the truck was out of Carson therefore accounting for the 0300 end time. 1. That is not true as clear by the dispatch time and the drop time. 2. Even if the truck went to Carson after dropping the vehicle, it is only a 1 hour drive. Make the math make sense. Even if I were charged the full rate and not "cut a break" I still paid more. The level of professionalism displayed by this business is non existent. The fact they are "the only tow company contracted with WSP" they feel that they are entitled to rip off private paying people. The company also told me that they should have towed the vehicle to their tow yard as I as the owner of the vehicle and the person paying for the tow has no right to say where the vehicle is towed. The receipts I have posted prove my claim of being over charged. I would never recommend this company for any business. If they cheat for their tow, imagine how much they overcharge for any other service they provide.

Willy is awesome! I was wanting a firewood holder and a few arbors for my backyard. I gave him an…read moreidea of what I was wanting. He drew up some plans plans and they were perfect for what I was wanting. The finished products are great, I am very pleased with the work he did.

Willy has done multiple projects for our company. He does a great job and has an innovative mind…read more I highly recommend him.

I got a call back right away from Shane and we conversed via text about my project. While the time…read moreline wasn't going to work out for us. I discovered there are other project Shane and this business is capable of in the RV market. His customer service "can do" attitude was appreciated and I would give this business my business we my need arises again. I am building an RV inspection business after the election season ('24) and I am going to add Shane to my list of recommendations for prompt response "can do" attitude.

From the owner: We work until the job gets done. Available 7 Days a weekread more

We had a metal balcony railing that needed to be welded back together. I started looking for metal…read morerailing fabricators but every one of them said they would only do the job if they could do the entire railing. I contacted Steve and he was able to get me into his schedule the following week. He even made a trip in advance to be sure he had the right materials and equipment for the job. Not only was his work excellent, but he really cared about the customer service. He called to confirm schedules, he called because he was going to be a bit late, and I always knew where I stood. Unlike many "professionals" who schedule times and you never hear from them again.

We engaged Steve Davis to fabricate a part for a broken appliance for which we were unable to find…read morea replacement (it had been discontinued). The fabrication required precise measurements and a specific material. Steve turned it around in the time promised, for a reasonable price. The part he fabricated fit perfectly, saving us thousands of dollars it would have cost to install a new appliance. He provided updates on the project and was very professional. He's also a really nice guy. If you are looking for a skilled, honest, local tradesman, look no further. Highly recommended.

We needed a cover for our pond so our grandkids and pets wouldn't fall into it. Mr. Harris came up…read morewith a great idea so it would be strong and safe but kept the beauty in tact. Very happy.

Tom not only did a great job welding some new metal plates on my brush hog (which is pretty ancient…read morebut still spins very well), but he even came to get my tractor (long story...let's just say he was really helpful); sharpened the blades; and greased the blade mechanism.

I have been working with NWT on my laser cutting projects for the past 7 years. They consistently…read moreprovide me with high quality products and problem solving solutions at a great price. I'm a small business with big demands and am always pleased with the service I get from them.

Wonderful experience. Quality work at a very reasonable price. I highly recommend Aaron's Custom…read moreMetal Fab.

Scott (of Aarons Custom Metal) made a beautiful new metal rail for our home. He was very…read moreresponsive with communication, the bid for the job was very low, and the results are great. I would recommend this business for all custom metal jobs.

I was having a hell of a time trying to find a metal liner for my firepit. The mass-produced…read moreliners online just didn't look great *or strong* and I couldn't find anything that was a good fit. I'm so glad I found Jim & Mighty Fab. He definitely went above and beyond for my small project. He came over for the estimate as promised and gave me a download on what he recommended for my project and we worked together on the details before landing on a final plan. He kept me updated along the build process and the liner turned out pretty sweet with a beautiful custom fit. Worth noting when comparing this custom liner vs the mass produced stuff online- Jim can create a welded one-piece unit that is structural vs. most online stuff is multiple pieces bolted together. Also, check out the seamless top lip- beautiful work! I don't think you'll find a more meticulous fabricator in town - Jim gets it done! Also, it's great to support a small business and an overall really nice guy. Thanks again for the great work Jim - very much appreciated!

This review is strictly for my Yelp communication with Mighty Fab when I inquired about purchasing…read morea sheet of 18-guage stainless steel or getting it cut to size if I provided the stock. Jim responded pretty much immediately with not only a thoughtful, friendly, and great explanation of what his capabilities are, but lots of suggestions of other reputable businesses to try since he couldn't quite do what I wanted. Jim continued to respond promptly and provide lots of great support and suggestions based on my responses. I particularly appreciated Jim's honesty and being so transparent and up-front about the results if he were to do the job with his equipment. Although Jim didn't have the capability to perform what I wanted, I was able to get the job done through following his recommendations. I'd definitely recommend contacting Mighty Fab if you need any metal work done, and I'll definitely keep Mighty Fab in mind for future needs.