Thee most friendly staff and their work is always on time and to our exact specifications. Will…read morecontinue to come here.

When you enter, there is no greeting, no hospitality, like you would get in a restaurant, "welcome…read moreto. But M&M Cut o Matic, let's you know quickly,how welcome you are and how they appreciate customers, with yes we can attitude, the capabilities to precision cut 8" thick steel with their waters jets, yep you herd that right jets. Many companies have a water jet, mostly with a small table,they farm out the work that will not fit their table. Not M&M Cut O Matic, If it doesn't fit theirs and there's a better machine with a bigger table, they will probably buy it. I spoke to a operator and told him I used to sell against them in a past job. Now I send customers to them. I told him my niche objection with M&M, which I would use, in my sales pitch. "Here's what separates the men from the boys I say". "Not any more",He replied, "not any more" and shows off their new lazor cutting machine. Impressive. M & M Cut O Matic, they cut the impossible every day, with quality and appreciation for their customers in mind. Me, I am now their hydraulic repair guy. You know what they say "if you can't beat them join them". Welcome to M&M Cut O Matic, I highly recommend,M&M Cut-O-Matic for your thick precision steel,aluminum,rubber,plastic cutting.

Very specialized old school shop. Racecar and aircraft grade plumbing fittings and hardware.read more

Horrible experience with the counter guy Mitch. I will never go back there. At first he was kinda…read morecool but when I changed my mind. He got extremely upset and started raising his voice at me and acted like he was talking to a step child. His true colors showed. At no time should a current or potential future customer be talked to like this. He could've restrained his anger and been more polite. Do not let this man talk to you like this find another place to shop. For the record, I left upset but at no time did I act mad at him or display hostility as he did me.do not shop here

My machine now is back to life after Jesus made adjustments it was a great experience this shop…read moredefinitely I recommend to anyone he found exactly what is wrong with the machine and fixed He knows what is doing you are simple the best. I'm happy my machine works like new again.

I had a very small item that I needed to get milled, so I called MVM. Owner Jesus told me to come…read moreon over and he'd take care of it...and that he did. SUPER guy, and super service. Other places could not do the work for me, or would not w/o an appt weeks down the line, but Jesus did the job in a matter of minutes. And the work performed was spot on...exactly as I needed it. Great guy to talk with also...very personable. Highly recommended!

Homies Hydraulics installed my hydraulic setup and I couldn't be happier. Rudy helped me out every…read morestep of the way and I was in and out in less than 2 days. I was worried with other competitive companies because i didnt notice any protection in the cars when working. The quality and professionalism of homies hydraulics was just the best. My vision of how my setup came out awesome. Thanks Rudy!

Lagged. Took way over estimated time to complete job…read more Later changed my mind about having them finish the job. after agreeing that they would put it All back to stock, they Worked finished car without my approval. 1 week later 2 front bags ripped

Wow. These guys know their stuff! Just finished talking to them with my mechanic and we will get…read morenew heads from them. Needed my stock heads ported and rebuilt for the stage 4 we are putting together and discussed the build with them. They actually already have a set of heads in stock for the specific specs we need and we can buy them as a core exchange. Turnaround in a week- which is fantastic for custom work. Plus, they certainly seem to know what they are talking about and that gave me tremendous confidence

If you are a regular guy looking for machine shop / head work services, beware- this place does not…read moregive a hoot about you and has a very low level of ethics. Below is my experience if you'd like to read up on what I went through. And believe me, I am a patient and non-demanding person. The only thing I did wrong here was choose to use them. They are supposed to be one of the best places to have Harley head machining and porting work done, right? Maybe so- great reputation in that regard. But, I'll never know. I brought my heads there about a month ago and asked if they could do three simple things: 1. check valve to valve clearance 2. unshroud the valves 3. enlarge the chamber to hit my target CC once I figured that out I also said I'd pay cash and they have my permission to do whatever is needed, no rush. Ideal customer right? They said sure no problem- I said it would be a week or so until I had the numbers spec'd out so they could do the headwork, again no problem. I left the heads there with them. [Week 1] So I call a week later and talk to John Okeefe, I told him I have the correct numbers and info to have the heads done, explained what I needed (items #1,2,3 above) - he told me he'd also need the camshaft specs. I said I'd email him the info and told him to "do his thing" per his best judgment given the camshaft specs, type of bike, and intended riding. He told me "ok". I sent the info via email right after the call, and then called the next day to check if what I sent was ok. I was told yes all good. [Week 2] I waited a week, and then called to check in . Spoke with John and he told me he was going to do the work on the weekend and they would be ready by the following tues / wed. I passed this info on to my mechanic so he could plan things out time-wise with my bike at the shop. [Week 3] So I called this morning (Wednesday, the 'ready' date), and checked status with John. John told me "oh I forgot- I'm glad you called so I can now remember to do them". wtf. ok, hey it happens right? So I ask him how long he says "maybe I can do it today - but really busy". So I said I'd check with him next week. He says "ok". So I take it that all other jobs are more important than mine, even though I've been waiting. I called my mechanic and told him what's up- no ETA on heads. He said he'd call over there to Branch and see what he can do. I then get a text message from him a bit later telling me to go and pick up the heads / no go. I'm like wtf but I go down there (50 mile drive). I get to Branch and John's not there but some guy "Charlie" is. I said I was there to pick up my heads. He fished around for them (they were stuffed on the back of a desk in a box under a bunch of other "apparently more important" customer boxes.) He slaps my heads down on the desk counter and that's it. No comments, no 'hey thanks but sorry about that', nothing. I picked them up ready to leave and I said simply, "how about an apology for wasting my time". Man the dude turned a shade of red and got all ape-crazy attitude on me- Then has the nerve to tell me "I never told them what I needed done to the heads, so that is why they are not done". From what I can gather, John LIED about it and said he had no idea what was supposed to be done to my heads. And he knew full well what to do, and even gave me a delivery day (today). So this guy Charlie is thinking there is no work to be done because his own guy lied about it, my heads probably would have sat there until the cows come home, and I'm getting attitude from them for complaining. The work order attached to the heads was void of any work info as discussed and confirmed with John twice, and written in an email. In fact, the email I sent with the work instructions was conveniently missing- The only email attached was one that had cam specs and some other tech info John told me would be needed. In short, absolutely worst experience I have ever had with a specialized service provider. I mean the guy John totally blows it and then lies about it to cover his a$$, the service guy is an ego-centric peacock, and they have ZERO regard for anyone's time or hassle. If you deal with them, walk into it with a big expectation that you may have some problems. I have since found out today that this is not new behavior for this place so I'm probably just one of many "little guys" who have come in seeking top quality work and ended up grabbing ankle.

Disgusting and irresponsible conditions! If you care about your motorhome, steer clear of this…read moreplace. If I could give zero stars, I would. When I arrived, my motorhome was spotless, but when I left, it was scratched, the steps were damaged, and the services promised were not completed. Grease stains were everywhere inside. And to top it off, they blocked my attempts to leave a review, only showing positive feedback and hiding all the negative experiences. Do not, I repeat, do not trust the owner of this business.

I visited this shop to inquire about the cost of replacing the hydraulic brake pump and sway bar…read morebushings. Roxanne greeted me kindly and informed me that I would need to return later for Allen to inspect the RV. I provided her with the make and model of my RV and asked for a general price range for the services. About an hour later, Roxanne called back and said I would need to bring in the RV and leave it overnight for a $200 inspection. I explained that I am a full-time RV'er, and she scheduled me for an 8 AM appointment the next day. I agreed. Shortly after, Allen called me and said he could only provide an estimate after inspecting the vehicle. While I understood his approach, I simply asked if he could provide a general pricing structure for those specific replacements. His response? "Are you stupid?!" I was shocked by the unprofessionalism. I calmly replied, "Excuse me, sir, please show some respect. I haven't disrespected you; I am just asking for your standard pricing for this service." He then yelled, "You don't tell me how to run my business!" At that point, I decided to take my business elsewhere. If this is how he treats potential customers, I can only imagine the level of care and respect given to their vehicles. To inform others, I've attached the phone conversation as proof. After checking their Google reviews--where they hold a 3-star rating--I realized I should have done my research beforehand. To any future customers, I highly recommend checking reviews and researching businesses before entrusting them with your vehicle.

I had a pump dropped off for rebuild. After 2 weeks and numerous calls where they told me they…read morewould call back, nothing. I had a flight to come down and pick up the part. I called twice this week to verify the pump would be ready and explained the situation. Heading over there, I called again only to find out the mechanic was off on Friday and that the part wouldnt be ready until the following weds. Disappointing as I had done lots of due diligence making sure this was ready, as well as scheduling a mechanic for the install. Took 24 hours to get the pump back that was delivered in a open box in the back of the pickup truck. In all, cost me so much time and energy (and money) for nothing. After nearly 3 weeks, I still have a broken pump. To their credit, they seem nice on the phone. Zero stars for punctuality or communication

A really poorly run company, one employee Francisco argues with customers. I took a pump in on…read moreThursday morning, they said they needed a couple hours to tear it down and diagnose the issues. I called back at 11:30 and spoke with the owners son (Tony) he said he had to go to lunch and could I call back in a couple hours. I instead stopped by. The pump was dissembled and Tony told me he could not find any parts. Prior to this I had provided Tony with the manufacturers phone number, the part numbers, and the seal kit numbers, as well as two different suppliers on the West Coast. By 2:00 pm no parts were ordered for Friday and the East Coast suppliers were closed. Into Friday, same issues, by the afternoon I spoke again with Tony he told me the parts alone were $600 not including mark up and labor to rebuild the pump. I went over to Applied Materials (formerly King Bearing) in Long Beach, asking about parts, they recommended me to PTO Sales in La Mirada CA. I telephoned them as I was driving and within 40 minutes was at their location. Within 5 minutes PTO Sales had arranged for all the parts. I found out the costs given to me by Long Beach Hose were quite high. I called Tony from Long Beach Hose and told him to reassemble my pump and have it ready for me as I would be picking it up first thing. On Saturday morning I arrived at LBH at 8:05 requesting my pump. Immediately, an employee called Tony, who asked me if I could wait for 20 minutes. While speaking with Tony, Francisco began to laugh, which made me quite angry and I demanded my pump which was refused to me. After waiting for the better part of 40 minutes Tony arrives on his bicycle, telling me he was doing me a favor by coming in today to give me my pump. The pump was in a plastic box in pieces, nor reassembled as requested, Tony told me that I had called to late in the day and the mechanic had gone home. I questioned him about the pricing of the rebuild kits and he told me his father (Raul) told me "to overcharge him because he was so difficult". Not only were they not willing or able to rebuild a hydraulic pump in a timely manner they were going to overcharge me in the process. Raul called me later in the morning on Saturday and I expressed my frustration to him. Told him Francisco invited me to go somewhere else, (which I will). I expressed to Raul that his business will fail, as he has hired many family members that he cannot fire. Their efficiency and work ethics are lacking. I told him the hydraulics side of the business with repairs and sales ought to be the biggest money maker for him, and I said it looks like it is a money loser. The hose side sells parts, and makes and sells hoses and the margin of profit on a $9 fitting or a $500 repair on a pump are light years apart. It is unfortunate that a once thriving business has degraded into such a poor quality operation since the tenure of Raul the current owner. If I could give them zero stars I would.

Ron and his team are professionals. Expert fabricators, willing to discuss any project I've had in…read morethe past, even if it's a one off prototype or atypical build. I hope Ron continues to serve the engineering/builder community in socal with excellent service and skill for years to come.

A+ service, friendly down to earth people. They help me with any fabrication, welding, etc that I…read moreneeded. On the spot service I haven't had to wait yet. Mr. Ron has knowledge in different areas that helps get multiple jobs done! THANK YOU FAB METAL SHOP! A+++