If for some crazy reason you are thinking of doing business with Mario Marriotti and Middlessex…read morePowersports you best do your research (including calling the Chemlsford Police Dept.) and prepare to be ripped off. My experience with Middlesex Power Sports / Old Outboard Marina or what ever else Mario is calling himself now, was exactly the same as other reviews you will find on the web if not worse. Mario had my boat for no less than...wait for it...4 1/2 years (not months, years). During which time I stopped in many many times to check on its status. I had to stop in as Mario does not take or return calls. In fact most of the time you can't even leave a message as his message are full. Twice when I visited I found he had been evicted from his place and the boat along with most everything else was gone. Tracking him down to his new location was both time consuming and as anxiety packed as you can imagine. At one point he did have it finished (although not tested) and was delivering it too me only to have the back engine cover fly off on rt 495. Mario did not lock the cover down and it was caught by the wind and flew off. This was a truly rookie mistake that could have easily killed someone. This is a much longer story than I have time to write here but after all the pain, anguish and time, Mario ended stiffing me for $200....sigh. DO NOT LEAVE YOUR BOAT HERE AND ABSOLUTELY DO NOT PAY ANYTHING UP FRONT!

I wanted to trust Mario, but sadly he can best be described as a scam…read more He wanted 1/2 up front, fortunately I only gave him 1/4, because 6 months later I still have no engine back on my boat. He is great at providing excuses and stories of crazy circumstances. He will tell you that all the bad reviews are just crazy "liberal" customers that had unrealistic expectations. I read the other reviews and figured I'd give him a shot. Bad call. Don't make the same mistake.

Definitely hands down the worse place to get maintenance done. I dropped my jet ski off on a…read moreSaturday and picked it up on a Tuesday and looks like nothing was done to it. It was in the same spot where I dropped it off. I brought it home and had a buddy look at it and said the same thing. I do not recommend this place. Will definitely not go back.

More will be revealed!…read more Only halfway through the deal now. I have an appointment at 1pm. I'm hoping to ride this baby off of the lot today :) Also plan to handle registration & inspection myself (I am trying to upgrade from a Honda 250 to this Honda 600). So far, I've primarily dealt with Ellen at the front desk. First over the phone, and then in person. She has been very kind and helpful, and has been able to secure and offer me a good deal. Perhaps if I'm handling the registration & inspection myself I might be able to receive a further price deduction... or perhaps a voucher for their riding school instead? Who knows? Couldn't hurt to ask :) I'm a new rider and have my permit, and have been riding my little Honda Rebel CMX250 with some confidence for some time now. Not a great highway bike though. Took her on a couple times anyways. As a person who is always running late for everything, the power and ability to take the highway if I want or need to will be invaluable. Getting ready to head back over to the dealership. (I was also there last night.) Hopefully we can close and I can ride her off the lot today! My first purchase was private sale and ended up being more of a project bike than I had time or money for. I'm hoping this bike will be ready to go with no issues for the foreseeable future! More will be revealed :)

If I could give no stars I would. We bought a brand new tao tao moped from him. I was so excited,…read moreuntil I took it out for its first ride. It just keeping leaking has. The second ride I drove my 4.5 miles to work and parked it covered it and proceeded to work my shift. When I went to leave work the moped wouldn't start. After being up all night working, I know had to stay awake to call the company to get the moped picked up at work and find out what's wrong with it. I literally put 24klm before it left me stranded. I finally get a hold of the but around noon, he will pick it up from my work around 3. It took 5 days to get it back and two more phone calls. Apparently it was an assembly problem from the manufacturer. Ok so now fast forward two months. I go to leave for work and low and behold the moped won't start. I called the shop for five days trying to get it fixed. My sister called as well and told him it wasn't acceptable to not return calls. Thankfully my wonderful brother-in-law got it running when they got back from vacation. Five months after the purchase I'm leaving the hospital where I do clinical, start the moped with the kick start because that's what they told us to do, push the foot pedal in and it starts to make an ungodly loud grinding noise. I call them no answer. I call my brother and we get the moped home and wait for them to call back, but they never do. At this point I have decided to call xtreme toyz in dracut, and thank God I did cause I still haven't heard anything from monster toyz. We payed have of the purchase cost to fix it because the kick start is not designed to be used daily. Also replaced a back directional light cause it was defective. While xtreme toyz was fixing my moped they found that the gears were never oiled and the front tire wasn't assembled tightly and was about to fall off.. If you are looking to purchase a moped save yourself the headache and save money and go to xtreme toyz. They are so professional. I will never take the moped to monster toyz again and when I purchase my next moped it will not be from monster toyz.

I took a basic welding class to make a barn star at the Garrison Speed Shop in Mendon,…read moreMassachusetts. I have never welded before or used some of the tools and equipment required. The template pieces were all laid out, but that was it. Co-founder Luke had me read and sign all the releases first, and asked about my experience with welding etc. Being a Veteran myself, Luke as well, and the non-profit supporting Veterans and First Responders, he also made sure to ask me if loud noises or anything would bother me. Every step was explained and demonstrated before I was able to do it, and as nervous as I was at first, it quickly went away knowing he took my safety, the safety of others as well as their shop very seriously. Co-founder Ben also provided some muscle when I was unable to bend the metal myself. In just over 2 hours I had sanded, measured, re-measured, bent , hammered and welded together a really cool one of a kind 5-sided barn star. It was definitely something different to do and it was a really cool and fun experience. 5 stars !

From the owner: The Garrison Speed Shop is a 501(c)3 Non-Profit Organization that empowers Veterans & First…read moreResponders to focus on healing and positive living through Motorcycle Recreational & Vocational programs. We raise funds through fundraisers, corporate sponsorship, and through motorcycle maintenance/repair/performance work to the general public. What better than fixing your bike while helping someone who served our country that could use your help? Services we offer: -General Motorcycle Maintenance/repairs -Self-Service Station hourly rentals (free to Veterans & First Responders) -Media Blasting Services -Media Blasting hourly rentals -MIG & TIG Welding -Metal Fabrication/repair Programs we offer: -General Motorcycle Maintenance Clinics -Motorcycle Performance Clinics -MIG Welding Intro Clinics -Advanced MIG Welding Clinics -TIG Welding Intro Clinics -Advanced TIG Welding Clinics -Metal Fabrication Intro Clinics -Media Blasting Clinics Events at The Garrison Speed Shop -Special social events & fundraisers that support Veterans & First Responders -Special Veteran & First Responder Group Trips and events -Motorcycle fundraiser rides -Open House fundraiser events Check out our website, or better yet, stop by and see what we're about!

Very knowledgeable guy. Great machine work, quick turn around time. His method is superior against…read moreany other machine shop. Not to mention I locked my keys in my truck and he assisted me on his time to unlock my truck. 10/10 will be seeing him again.

From the owner: Advanced cylinder head resurfacing at affordable prices with fast turnaround. Flatness is key to…read moreproviding the optimal mating surface for both performance and reliability. Our typical flatness less than .001" over the ENTIRE surface of the cylinder head, end to end. This far exceeded OEM specs and traditional engine machine shops can't touch our tolerances. You want your cylinder head back in days, not weeks. With lapping, you never need to disassemble your head. Leave the valves, springs, plugs, cams & gears in place. Pull the head and bring it in. Trust the experts.

I can't thank matt smith at New EnglandTrim enough. First for the amazing job on the interior. But…read moremostly for correcting an issue that had nothing to do with his work. Matt being the guy he is went above and beyond to tape and protect the roll bar paint in my chevelle. But due to the cage not being prepped correctly the paint came off while I removed the tape. Matt could have told me to pound sand but instead told me to bring it to him and he would repaint the cage. It's really nice to work with people who care about your projects. This has been a dream of me and my dads for years and just as I thought things couldn't get any worse matt swooped in and saved the project. I honestly would never use anyone else but matt at New England Trim. Thank you again you don't know how much we appreciate what you did for us

I just had the headliner in my 2000 Jaguar XJR replaced by New England Trims, Inc. They were very…read moreprofessional and made the whole process very smooth. The windshield had to be removed and replaced after the installation of the liner. Lindsey coordinated with the glass company (Roy's) and they got the whole job done in less than 32 hours. They did an outstanding job on the headliner and thoroughly cleaned the interior. They were highly recommended to me by a local Body Shop. AND, I would highly recommend these people to anyone! The only downsides were waiting for an appointment (because they're in big demand), and my wife didn't like the smell of the adhesive after we picked it up. I should have waited a few days before taking her for a ride... All thumbs up!!!