Kilo Guns has always exceeded my expectations. Wyatt and Rob are masters at their craft and are…read morewilling to do nearly any task to fulfill your vision. They have helped me with many of my dream guns, parts, and cerakoting and are always open to call and talk about progress & recommendations. Their pricing is fair and their work/knowledge is top tier. Wyatt, Rob & the rest of the team will find a way to get it done!!

One of the WORST gun shop in town. EXTREMELY RUDE and UNPROFESSIONAL. Terrible customer service…read more Folks stay away from this shop.

OPTIC CUT/SLIDE MILLING BEWARE!!!…read more I took my gen 5 Glock 26 slide to Glockmeister for their optic cut service. I brought my optic in to ensure that the correct cut would be made and it would fit before dropping it off for service. I received a call exactly a week after I dropped off my slide letting me know that it was ready for pickup. I also had a compensator installed at the time of pickup as well as the optic being attached without being shown the actual work done. I was so focused on the compensator and over all look of the build as a whole, that I did not notice the big gap between the slide and the optic until I had gotten home and noticed you could see the screw as well as the blue loctite in a picture I had taken. I immediately drove back to the store and informed the employee of the issue, to which he instantly got upset and started raising his voice. He began trying to gaslight me into thinking there was nothing wrong with the cut at all and that "sometimes that happens with custom work". When I brought up the fact that the gap is bigger on one side and the optic is crooked, he claimed it was not crooked and there was nothing wrong with it as he installed it himself and didn't see anything, refusing to acknowledge or address the issue. I walked out at that point and decided to get a second opinion from Southwest Precision Arms the next day after being referred to them by a friend. They removed the optic for me and were able to show and explain just how bad the work done by Glockmeister actually was. According to them, it was the worst cut they had seen in the past 10 years of the business and that my slide was ruined. The cut was made way too deep, causing the screw hole nearest the extractor to only have maybe a thread and a half at most before actually hitting the extractor. There was also a strip of even more material removed than the already too deep cut itself in the very back, causing the optic to never be able to make full contact/sit flush even if it did fit correctly. Upon receiving this information I drove straight back to Glockmeister to see if I could get in touch with the owner about the situation. I was met with the same employee who claimed that there was no way to get in touch with the owner as he is camping deep in the woods. I began explaining the ruined slide situation again as calm and collected as possible and was met with more aggressive behavior and complete denial or acknowledgement of anything being wrong with my slide or the cut at all. After some back and forth I was offered "like $75", then finally offered a refund if I was not happy with the work. Still no acknowledgement of any wrong doing at all. I denied the refund as this is beyond just not being happy with the work. I am now writing this review in the hopes that I can somehow get in contact with the owner to make the situation right as well as to warn others if they are thinking of getting their slide milled for an optic at Glockmeister.

Every time I do business with the guys at this store I'm treated respectfully and attentively! Gary…read moreand Adam are always courteous and helpful, whether I'm buying, selling or having work done on any of my Glock pistols! They typically have a nice selection of a variety of pistols, both new and used, that are fairly priced. Stop in and check them out.

Recently stopped in at refiners firearms after being recommended to them by someone else in the…read morefirearms industry. I was looking to buy either a 365 or a hellcat and could not find either in almost any gunstore in the great phoenix area. Not only did Jonathan at refiners have both, he had several models of both to choose from. Jonathan, a firearms instructor, spent the better part of an hour with me helping me decide which gun would fit me best without being pushy or assertive. I learned a few things buying this gun from him and had a good time doing it, and intend on coming back for his firearms training classes in the future.

Train with Jon! I used Jon for a few FFL transactions and he…read morewas very helpful. He had mentioned at that time he did training as well, and after looking into both group lessons and individual training, I decided that for something so important, an individual one-on-one training was going to be best. I can say with certainly the extra cost and time training with Jon was totally worth it. He took care of the reservations at a private range, and started from scratch to intro me to handgun shooting. I left feeling significantly more confident, knowing i wasn't going to pick up bad habits, and was able to put down nice groups downrange by the end of the training. The training was so good in fact, that I plan to take another training for rifle marksmanship.

I bought an inexpensive doublestack 1911 and after about a 1000 rounds realized it needed serious…read morework. Gunsmithing was excellent. Looks awesome, trigger job is nice and crisp, and it now locks back with empty magazines. Highly recommend.

Awesome provider for firearm services they do everything. Engraving Cerakote, trigger jobs, scope…read morezeroing ( with some serious expensive looking devices) I always feel like my scope is canted well not anymore! good attitudes and prices are fair. Since they are an actual manufacturer which is likely why they have things you cant find anywhere else. The optics line they import (exclusively if I'm not mistaken)amazing Billet Aluminum alloy! and they have night vision laser/ ir set ups better and smaller than anyone else somehow for less and the awesome pop up optic! so durable they were seriously dropping it on the ground just to show it could withstand abuse! I saw it with multiple customers. The online store has more inventory than the actual gunsmithing / storefront but I come in to see the consignments they have since thats not online. a whole wall of mauser world war 2 rifles from 5 different countries and a 1911 thats chambered for 357 mag! Even actual Joe foss owned Guns used in the war by Joe foss himself. I have a go fund me if anyone wants to help a financially challenged student get a Reaper pop up red dot optic on my 2011!! Im looking to be one of the first civilians to own a Di optic Reaper pop up! in the Marine corps they used one on the .50 not a reaper but a DI optic unit (much larger I saw one in the display) it was the only red dot that did not succumb to SIDS! you know sudden infant death syndrome! it really shakes the hell out of em!

It's easy to like a gun shop when things are going good; it's the difficult times that determine…read morethe quality of the business. I had a warranty issue when a firearm I purchased from MMP malfunctioned. Byron and Henry handled the issue in a timely manner and made sure to achieve a resolution. Good prices too. I would shop here again.

Great ammo, and friendly and knowledgeable staff…read more I no longer load for major matches. I use Scorpion's USPSA Certified ammo, and don't notice any difference in felt recoil from my handloads. However, I do believe it is more accurate. I won my category at Factory Gun Nats this year with Scorpion. I'm a customer for life!

I recommend THIS ammo! Great prices & the ammo shoots well. Great customer service! I will be…read moreshopping here for all my ammunition from now on! SC

Great guy. People will try and leave a bad review because hes a home based ffl but hes always been…read moreconsistent and genuine. If you do business with him , make sure your documents are in order and dont be late to your appointment. Will be back to do more business. God bless

Very friendly and professional ffl transfer. Everything went smooth. Great to deal with..Thanksread more

Good local shop, run by good, helpful people. Great local, reach out and support this store.read more

Just came across this great store a few week's ago! Kyle the owner was awesome! Store has a great…read moreselection of all Things that go bang, and lots of ammo!