Needed a whole new hybrid unit, inside and outside. John was exceptional. The old unit left in the…read morecondo was horrible and there were so many things wrong that we didn't realize until it finally stopped working. John, James and Kyle went above and beyond the original scope of the work to do a proper install. Needless to say we now have an amazing unit done correctly. He and his crew are meticulous, neat (cleanup looks like no one was working there) and his recommendations were spot on. A real pleasure to have found him. Hopefully I won't need his services in the future but if I do he'll be my first call. Thanks again.

Unreliable! No showed on my first appointment, no follow up or apology offered. Finally came out…read moreand No follow up on the work that is needed. Air conditioning was working prior to Viktor coming out after he left it didn't work again. No response from them via phone message, text message or email sent.

A perfect job from estimate to turning the final screw. Hampton's Air is a great team to invest…read moreyour hard-earned money with. You will not be disappointed.

Great and accurate service. My transformer on an air handler died from age, and 4 hours after…read morecalling Hamptons Air - my AC was fixed!! (On a weekend, too!) Excellent communication, timely, and experienced. Thank you for your help - 5 stars.

Moldbusters is one of the best vendors that i have ever hired. they cleaned up the mold in my…read morebasement that seemed to come from nowhere and grew very quickly. they educated me to the sources of the problem, helped to insure that mold would not reoccur under normal circumstances, and did not charge me a fortune. they were kind, friendly, and efficient. it's a family business. they obviously take great pride in what they do and in helping their clients. if you have moisture or mold, you cannot go wrong by hiring them.

I had a large issue with mold in my basement and really didn't know where to look. I asked around…read moreand a friend recomended moldbusters.com. Upon calling Moldbusters they had someone at my home within an hour of the phone call. They were profesional and corteous. Within a week my problem was gone and I was stress free. I strongly recomend Moldbusters to anyone with mold issues in the Long Island and New York areas! You can find them at moldbusters.com.

Flanders installed a new air conditioning unit at my house two years ago. My wife activated the…read moredehumidifier mode last week, only to find that a mildew like smell was being emitted from the unit. I called Flanders and they walked me through a simple adjustment that was an oversight on MY part, and saved me the expense of a service call. Fast Forward two days later, and they actually called back to ensure that the system was still functioning properly. Outstanding service complimented with follow up. Reminds me of the old days.!

Would give zero stars if an option. Enjoyed great service from Flanders for year, now it's an…read moreoff-shore call center, long waits on hold, appointments where nobody shows up. Awful, will be looking at a different LOCAL company to service my home.

I renovated my home and decided I didn't want a steam boiler and individual large air conditioners…read morealong with steam radiators for heat but still needed both Heat and Cooling. I contacted Amerikhomes and made an appointment for Leon to swing by to get an opinion on a new system. He came on time and recommended a mini split system as the solution which would be my primary source for both heating and cooling. We agreed on a system and moved forward with the installation. He ran the piping/wiring and drainage for the units in each room but didn't mount the units until the sheetrock was up. Once the sheetrock was up, he mounted the units and brazed the piping. He advised fittings was not the way to go because as time passes, it may produce a leak and because all the piping is inside the wall, it'll be very difficult to get to whereas brazing is more a permanent connection so he sealed each location via brazing. This was not a 1 time visit. The installation required a multitude of visits to complete. Once everything was installed and ready to be powered on, we went ahead and briefly tested it. The A/C was blowing ice cold and the Heat was nice and warm. No issues during the summer with the A/C but when winter came, a serious problem started to occur. In heat mode, the defrost came on which in itself is not unusual but what was is the fact that it would not turn off. The defrost cycle continued to run to the point where the inside units would start building up frost and ice and the only way for the unit to start heating up again was if you turned off all the indoor units and turned them back on. I contacted Leon to inform him and he couldn't find any issues with his work and that it has to be the unit. Justifiably, he will have to charge me to troubleshoot the unit to pinpoint the problem. For months, Leon and the vendor went back and fourth pointing out the possible causes for the issue but the vendor continued blaming Leon's work and Leon kept explaining that the issue was with the unit so they would not pay him to troubleshoot the unit itself. At this point, we were at the "tail end" of winter and ended up putting up with powering down all the units and powering them back on when the defrost issue started. It took months back and fourth with the vendor and manufacturer that winter had already passed and heat was no longer needed. Towards the end of summer I decided to take matters into my own hands and go based on what Leon mentioned to me being possible causes. he told me that it could be one of 3 things. Either a bad thermistor, a bad controller board or not enough Freon. Well, I know the charge was good because Leon had tested the unit countless times in front of me and the PSI was the same each time. I started with the cheapest item which was to purchase 3 thermistors. Tested each new thermistor and swapped them out. Upon testing the old ones, I found them to be functioning correctly but decided to leave the new ones in place anyways. Well... If the Thermistors were good and the PSI was within range, then the only other item according to Leon is the Controller board but would have to pay out of pocket since the manufacturer would not take responsibility and would charge me $678.00 for the controller. Keep in mind that i already spent thousands on the unit and the installation just to spend spend loads more on an expensive part for a brand new unit less than 1 year old. I refuse to further fund the manufacturer and decided to get the part on my own. I found a controller board from china for less than half the cost the manufacturer charged me. The part arrived ~ 3 weeks after I purchased it and went ahead that same day to swap it out. I took pictures of each part to make sure I put everything in the right place once disassembled. Long story short, I completed the swap. Also had to "de-bug" the system for it to recognize the indoor units. The whole process took me a good 3 hours. It was not cold enough to test because the temps outside were in the mid 60's so I had to wait until it got colder to turn the heat on. 3 weeks have passed where the heat needed to be used and finally started using the heater. After crossing my fingers, the unit, after 4 hours of being ran went into defrost (as it should) but came out of it as it supposed to do. It has been 3 months and not a single time did the defrost get stuck. LEON WAS RIGHT! Despite not charging me for the work/advice, he gave me the information to figure out what the problems could be. I have to say Leon was excessively patient during this whole headache and charged me not a penny more than the cost for the installation. Most installers would have said "everything on my end is good. Good luck dealing with the manufacturer" but Leon stuck around through the rough patches. He is fair on price, knowledgeable and patient. I will always use him for future reference anything HVAC related... I advise/recommend you to do the same.

Excellent service. He was the only one that message back with pricing and time availability. When I…read morecalled to schedule, I explained what was wrong with my boiler and again explained to me his pricing and he said he should be able to fix it in a reasonable amount of time. He asked if I had any heat and I said "no" and he said he would be able to come later in the evening which was beyond his business hours. He said he would call when he was on his way and once he got here he went straight to work. Very knowledgeable and has a pleasant demeanor as well as decent pricing.

Have been using Charlie for a couple years now. He is local small business owner that is there when…read moreyou need him in an emergency situation... Does honest work and uses quality parts. Unlike those guys who get parts from a guys trunk in a Home Depot parking lot

From the owner: Full service HVAC Heating…read more Boilers Steam Oil Gas Electric Hot Water Heating Systems Tankless Hot Water Heaters Radiant Systems Humidification Systems Wi-Fi Smart Thermostats A/C service, repair and install Chillers Rooftops Industrial Sized Units Dehumidification Systems Plumbing Steam Pipes Custom Manifolds Residential (Suffolk County) and commercial service (Suffolk, Nassau, & Queens), install and custom maintenance contracts in your area. We work with brand names, such as- Carrier, Lennox, Mitsubishi, Rheem, RUUD, American Standard, Comfort Maker, Goodman, Trane, Biasi, Bryant, Honeywell, and so many more.

We had a GREAT experience with this company. We needed a…read morenew boiler on Shelter Island. Within a week, we received a written estimate and a date for installation. The manager, Steve Cummings, took time to explain the size of boiler needed for five zones, plumbing work and new water heater. He answered many questions and did not rush us off phone. They removed and installed everything within a week from the estimate. They completed the job as promised, within two days. The were very neat and protected floors. Just a great job.

So I called Hardy Plumbing and made an appointment. Jonathan…read morearrived a bit early and serviced my very temperamental Navien boiler. He descaled both parts of the boiler and replaced the in-line filter and the igniter. He checked all was well and I was extremely pleased. Hardy Plumbing is NOT CHEAP, but if you want the job done right call them. P.S. They fixed my hot water problem after 7 other plumber failed!!