This is my go to place for propane refill. I have not rented tools, but they are always fast,…read morefriendly and knowledgeable with my propane questions regarding my recreational vehicle. Great prices too.

They overcharge for their propane. Almost double the price of what neighboring suppliers charge…read more Yesterday they were charging 3.70 per gallon when uhaul 5 mins away is charging 2.10. Way to take advantage in these tough times guys.

GREAT SERVICE I…read moredrove out of my way to this shop after too many abysmal experiences with my hometown Stihl dealer. Jim was fantastic. Very personable and spent 45 minutes with me explaining the different saws. Talk about integrity - he assessed my needs and ended up talking me out of a more expensive unit with unnecessary features. He then told me that Stihl "Dealer Day" sales were coming up, in case I wanted to hold out for the lower price in a few weeks. I was so impressed with his attitude and service that I bought it today from him at full price. His friendliness and honesty were worth it. He gassed it up, checked to make sure everything worked, walked me through the multi-stage choke (new to me) and adjusted, then re-adjusted the chain. All with some friendly conversation and a level of knowledge that I know he'll back what he sells. I'm glad to have a new place to take my gas powered tools for repair and a place where to buy my new Stihl products. Thanks Jim!

I just purchased a STIHL MS 251 WOOD BOSS chainsaw here and the service is phenomenal. Jim was…read moreextremely friendly and helpful in explaining all of the features of the saw as well as test running it and verifying all of the components worked properly. It runs like a top and starts with ease. With such helpful people both on the floor and behind the register, I will be coming back here for all of my outdoor power tools.

My 20 year old snowblower that had all sorts of problems now runs like new! It was repaired very…read morequickly, and at a very fair price. Highly recommended!

I believe in engineered obsolescence. Over the years I've learned to scoff at most for-profit…read morerepair services for appliances toys gadgets power tools and even some vehicles. We invested in a Miele Complete C3 years ago beyond memory. I pay more when I can afford more to get more quality better engineering etc. Our Miele was GREAT. Lasted for years and looked like it. We took it in to get cleaned up after a bag installation mistake that filled the compartment with filth. I was prepared to buy a new machine. They said they could put it right and for a few hundred bucks up charge they could make it "look and function like new." I told my wife no way. She told me to get out of the way and ordered the service upgrade. She was right. They made the vacuum look and function like new. It's been a few months and the vacuum is still like new. Thank you Loveland Vacuum for a little restoration of faith in honest folks doing honest work.

Serviced and cleaned my 1973 kenmore sewing machine. I have confidence in their skills and will…read morecontinue to use their services. Excellent job!

Brought in our family Vacuum cleaner and Megan helped us get it fixed in a quick manner. She was…read morekind and professional. They have good products there and the service was top notch. Affordable as well. Thanks! We will be back!!

This store is the real deal for vacuum repair. I thought my trusty vacuum would have to be…read morereplaced, but instead, they fixed it, saving my appliance and saving me lots of money. They got it working perfectly and stopped it from the crazy loud noise it was making. You can recognize a skilled person and this woman knew everything about vacuum repair. She was also so friendly and fun to chat with the whole way. This shop is full of truly good people who really care about their work. What a gem, it's a rare thing to find that nowadays. And they saved me so much money. Five stars all the way.

This locally owned hardware store always has firemen, helpful staff. They, can match paint, make…read morekeys or help you get the right stuff for every project from plumbing to bbq.

BEST ACE IN FORT LUPTON, great service, great employees, great supplies and awesome location.read more

They did an amazing job, friendly and we discovered my kids knew him from school. They are…read morereasonable

Had a stamped concrete slab done. Noticed several cracks as it cured. Called both owners and the…read moresaid they would come back. No show. Called again...they blocked my calls. Called 6 months later for them to return and seal the cement...part of the original contract. Mario said to call him back and schedule a time to do this...no show and blocking my calls again.

Sorry to see the negative reviews here - glad I wasn't persuaded by them before trying out this…read morecompany. I called Quality Sewing and another repair shop here in Longmont. My machine is a heavy Singer from the 1980's, and it had absolutely no tension. The *other* shop told me it would cost me over $100 for a cleaning and tune up, it would be a 2-week turn around, and they would let me know if they found anything that needed to be repaired, in which case I would need to pay even more. Then I called Quality Sewing. Deb invited me to bring the machine in, as their technician was in the store, and that he would be able to tell right away whether or not the machine was reparable. Said it would cost me for any service, and that maybe it would cost a marginal amount for diagnosis if it turned out they couldn't help me. I lugged my machine in and they changed out the bobbin and needle, set everything to "medium" settings, and sure enough saw that the tension was off. In trying to make a zigzag stitch, they were not familiar with the weird discs that my machine uses for decorative stitches, but I was able to help them identify and install the correct disc. I'm not put off by their unfamiliarity with the particular model that I have. It was partially my fault for having taken out the basic zigzag disc. ANYWAY - the technician took out the bobbin case, made a small adjustment to a screw, and my problem was solved. He then tested the machine with my own bobbins, and it still worked beautifully, so I know I have the right bobbins. I'm thrilled - now I can dial in a "4" tension instead of zero, and get a nice clean stitch! The charge for this 5-minute fix was $37.50, and they let me keep the new needle that they installed for the diagnostic. Maybe the simplicity of my issue makes this review irrelevant. More complicated repairs might not be as successful? Personally, I truly appreciate how fast they were able to help me, how inexpensive it was, and how I didn't have to pay for a cleaning which was not part of my issue (though I could see the dust inside when he removed the bobbin cover! I've already got machine oil and I'm going to google myself how to clean that out). Waiting 2 weeks just to have a small screw tightened up??? PLUS, now that I've watched him do it right in front of me, I have a sense of what to try if my machine ever starts acting up the same way again. After ringing me up, Deb and I chatted about classes they offer and what I am hoping to learn as a beginner. They seem to offer classes more geared towards crafts and quilting arts. I would like to learn more about using patterns to make clothes. She directed me to another woman who offers both kids and adult classes for learning what I want to learn. I appreciate that she was able to refer me to someone even though they themselves wouldn't be able to help me as much. Seeing as how I don't have one of those new fancy machines that are available, I am thankful to find an honest, fairly-priced place who can do on-site adjustments and repairs even on strange old models like mine.

Ed is a top rate technician. Somehow the knife blade for cutting he thread broke. He replaced the…read moreblade and cleaned my Baby Lock. The settings were cleared which was time consuming to reset, but it works very well now. The service fee was $179 which included the repair but it would have been that much without the repair. That's a bit high in my opinion, but if I only have to do this every 3 years or so, then I suppose it beats buying a new machine. I love my Baby Lock.