Excellent coffee and great ambiance. The pour over offerings looked excellent but I went the…read moreseasonal blueberry espresso tonic instead - shout out to the barista for helping me make up my mind between them.

a solid spot to hang out or get some work done (albeit not very spacious), and the service is super…read morefriendly. i got their seasonal strawberry malt latte and it was really smooth and strong. i do wish the strawberry flavor came through more, since it was heavier on the chocolatey sweetness, but it was still enjoyable. i also really liked their house-made almond milk and love that there's no upcharge for it :) the pastry selection was a bit limited when we went, and the lemon poppy loaf was slightly dry. i'd love to come back and try their food items and more coffee tho!

Pastries are pre-packaged and stale! $5 for a slice of lemon poppy loaf, dried and hard. I can…read moreget better quality at any convenience store and they don't ask for a tip. Their coffee choices are limited and I don't dare try their lunches.

I need a rusted out stair to be replaced. Jorge did the work without any issues, stair looks great…read moreand the quality is very good. Jorge is very professional and I would definitely use him again for all my welding needs

These guys are great to work with! Jorge was the most responsive of the welders who we invited to…read morebid on our project - to custom make a steel raised bed for the back yard of our newly-built house. He came up with multiple ideas of what aesthetics would look good for our project, and came up with a great design that matched the look of our newly-built house. Throughout the process he was communicative and I always knew when the end product would be delivered. The bed looks GREAT! And the project was finished when Jorge said it would be and for a reasonable price. I would strongly recommend Jorge to anyone looking to improve their home with custom-designed metal!

I could not be more pleased with the work Jorge and his team did on installing the driveway and…read morefootpath gates as well as a new gate opener. The quality of materials they used is outstanding. Everything looks clean and sharp! Most importantly, It looks like this all appeared miraculously overnight. My neighbors are impressed as well! The workmanship, professionalism and attention to detail is outstanding! The price was very reasonable. I will definitely recommend Sanchez Access to anyone and everyone!

Installed an electric swing gate at our home. Affordable, easy to work with, and did a great job on…read morethe installation! Highly recommend Sanchez Access for your gate/fence needs.

Metal Craft worked with us to provide a solution for a truck loading problem for our nonprofit…read moreorganization. We wound up with exactly what we needed.

From the owner: Metal Craft: Houston's Custom Metal Fabrication & Electrical Enclosure Experts…read moreFor over 40 years, Metal Craft (Partners Metalfab LP) has been Houston's trusted B2B (Business to Business) partner for precision metal fabrication. We serve major electrical companies, distributors, and diverse industries, committed to quality and on-time delivery. We specialize in electrical enclosures, offering a full range of UL-listed options: N4: General-purpose. N4X: Weatherproof/watertight. N12: Dust/oil-tight for indoor use. We also fabricate reliable non-UL boxes: N1: General-purpose indoor. N3: Dust/oil-tight for limited hazards. Our services include expert sheet metal fabrication (cutting, bending, forming, shearing), skilled welding (MIG, TIG, Stick), and structural steel fabrication for platforms, skids, racks, and many other custom projects For finishing, we provide robust industrial powder coating, using only commercial colors for superior durability and aesthetics. While primarily B2B, we sometimes work directly with walk-ins for projects that fit our criteria and are brought to our shop. Contact Metal Craft today for your custom metalwork needs!

They have done excellent job fixing the damaged anchor attachment of my iron fence. Their…read morecommunication was very responsive and thorough. Highly recommended.

After having about 11 people come by to provide bids I started looking for company to help rebuild…read morea fence that can do both wood and metal because I wanted a half metal half wood fence. I decided to go with them because their bid was the lowest but looking back there were a lot of red flags from the beginning of the communication process with this company that I should have considered. For example the owner sent me a side message saying if he were to respond to my message it would cost him $70; and just based on what I dealt with they do not seem to be a established business based on communication, the amount of nickeling and diming done and the final product. For the whole fence, I provided him with a picture of what I wanted specifically for the gates and some images circled and let him know I wanted it to be as long and continuous as possible with only metal cut offs where they needed to be and any extra support can go in the back. He also provided me a picture that had a lot of metal around the edges and I didn't not like that and stated it was too much metal and again provided him with my photo. This was the only conversation we had about the gate and when it was constructed it looked like the photo he sent vs what I sent. And instead of acknowledging his error he was rude and combative and his brother had to step it. That was the begging of a whole lot of other issues especially them nickeling and diming me for all of their errors that were a result of terrible communication from him. They charged me a flat fee to build the fence "professionally" and it looks a mess, there is nothing professional about it and also tried to hit me with fees for stuff that was included already in the price to rebuild so that is why I know they are a new business. The slide gate is not sturdy and they had to cut a whole in my other wood to make it functional, that I did not know about. They also installed the sensor wires on the outside which could easily be cut even though I expressed safety concerns throughout the whole process. When they were installing the sensors I was outside because they were 2 hours late and it was getting dark so I had my car headlights on and he never asked me anything about it and when I spoke to him about the placement he said it would delay the project and he needed to do what was best for him. After the wood sat in the sun for like 3 days the slide gate stopped closing because the sensors shifted and sounded an alarm with an error code of 71 every time you tried to close it. The only way to close it was to hold and after contacting him he blamed it on me after not responding for 2 days (see attached convo). I had lift master come out to fix it and it turns out they were a lot of issues like not installing all of the wires correctly etc. one of his friends did the install so I am not sure they were fully authorized to do it. The walk-in gate looks awful it was not measured correctly and it is not fully functional. He also agreed that the gate/fence does not look right which is also my fault according to him because I purchased my own wood (see attached convo). He also told me that it was "hard to install gates" and that he would have had to do extra stuff to make it even which was like what do you mean that's what you were getting paid for! For every complaint I had his response was, it's going to cost you to fix it. They just left me with whatever and now I have to deal with it. Now that the wood has been rained on and has settled the walk-in gate no longer stays closed at all and randomly opens. I provided them with the lock well beforehand and it's not operational. They screwed the key frame into the slots that the other wood is screwed into so the nails do not stay in place and a part of it has cracked off due to the gate slamming when it opens by itself. The metal part that is supposed to latch does not fit so it just does not stay closed. They also did not add support beams to the back of the fence so the fence bubbles out and caves in and is wobbly in certain places, especially places where the metal posts are because there are no screws there. Overall the did an awful job and they left me with a mess that killed my grass and and did not not finish painting. There are sooo many other things that I can highlight but this review is long enough and I can only add 10 pictures! 10/10 do not recommend!

Hal did some welding and fab work on one of my race bikes. His work was clean and my bike came out…read morebad ass. Can not recommend this shop enough. His attention to detail, quick turnaround time and fair pricing can not be beat in the Houston area. I will definitely be a repeat customer....

Hal has repaired multiple cars and trucks for me. Although motorcycle racing(Harley's) are his…read morespecialty, I've always had good results here. Fast too.

We contacted Roberto to build baby gates for our staircase. Roberto provided a fantastic solution…read morefor us that looked great. The gate is sturdy and removable when needed while also matching the style of the stairs. It looks as if it were a part of our home. Roberto is incredibly kind and was a pleasure to work with. The communication was fantastic and overall, you could really tell there was a high level of pride in his work.

The first job Roberto did for us was to take the standard ironwork on our front door, create an…read moreiron frame, and put it on hinges. This turned what used to be knuckle busting work to clean the glass into an easy chore! I absolutely love it! A few weeks ago I contacted Roberto and asked him to build a baby gate for us. With 3 grandkids under the age of 2, this was a huge concern for my husband and me. Roberto was able to match the design we had on our staircase, and the best part is we can remove the gate when the babies aren't visiting! Roberto is wonderful to work with. He is a family man and takes such pride in his work and is so quick to respond to any questions. He also is so good at keeping you posted throughout the process.