My experience with seacoast is limited to their alpinestar techair vest service which has been…read morestellar. Dana was friendly, knowledgeable and kept me in the loop throughout the process with my first refill on my techair5 and the turnaround was incredibly quick. Unfortunately I needed a second refill a few months later and turnaround was also exceptionally fast. I'll likely purchase my upgrade there as well

I can't say that I've personally purchased a motorcycle from Seacoast, what I do have to offer is a…read morebit of advice. If you are looking for an easy, reputable/respectable transaction, I recommend going elsewhere. Upon entering the showroom and immediately walking up to a 2025 Ducati Panigale v4 by Lamborghini, I was rudely informed that the bike was in fact sold after wanting to purchase the bike outright in cash. Upon inspecting the bike, it had no slip recognizing that the bike had indeed been sold. The sales representatives were downright rude and blatantly unprofessional, during a previous walk-in an employee was openly expressing her political beliefs to me after I jokingly expressed my dislike for the tariffs which caused a change in price for their riding gear. Which made me quite uncomfortable considering the professionalism that goes into maintaining such a well known brand of Italian motorcycles, it was blatantly unprofessional. Not only that, every sales representative was watching me like a hawk from the moment I arrived, to the second I walked out the door. I felt I was being singled out, as if they thought I didn't have the means to purchase such a motorcycle. Even being told at one point that I should look at cheaper brands elsewhere as if I was broke. I've since purchased a Ducati Streetfighter V4 Lamborghini and a brand new Ducati Panigale V4 Lamborghini from Riverside Motorsports in Boston! If you are looking for a reliable dealer, I recommend Riverside Motorsports, the Ducati dealership of Boston!

I bought a car off of Mark. I got a great deal and I have had home work on another car and my…read moremotorcycle. So far it's all been a great experience.

Mark performed an affordable and thorough inspection for me today. I called this morning and he…read morewas able to squeeze me in immediately. Great service. I will definitely be back for my future automotive needs.

Mark and the crew do excellent work. I'm very selective as to who I let work on my vehicles, and…read morethey have my full trust. I left my vehicle off with them while I was away on vacation for a week to get some repair work done, with the need to pick up my vehicle on the way home to have it back for work. Mark texted me Friday afternoon to let me know it was all set, and where to find my key. When I picked it up, the vehicle was fully repaired to my high standards, and even the interior was detailed, a pleasant surprise! I can't recommend them enough, and will be my go to for any future body and paint work!

These guys got there game on! I have brought multiple vehicles to 603 and they can work miracles…read more They have a professional and courteous group of guys on board. State of the art spray booth and a nice clean shop to bring your vehicle in for work. I would highly suggest checking them out before any other auto body shop. 5 all the way.

We can not express how pleased we are with the service we have received at Motor Sport. Tony…read more(owner) is not only a nice guy but has gone above and beyond to help us with replacing the motor in our truck. He even went to bat for us with the motor company when they sent a defective motor and needed 1st new heads and then an entire new motor again! They have been fantastic working out all the "bugs" that come with replacing a motor and always treat us with kindness and respect. They even donated a gift basket for a charity event our Truck Club is doing. Top notch people doing great things for their customers and community. They have a lifetime customer in us. Thank you guys!

Used to bring my Dodge there, they replaced everything under the hood before they diagnosed the…read morereal problem, a blown head gasket. Wish they had been upfront with me to begin with. Later, after they charged me over $130 to replace a battery I stopped going there and have found more honest auto mechanics. I am a single female and the unfortunate reality is I have been taken advantage of many times. I have learned to do a lot of maintenance myself.

Matthew, my last name was changed due to an abusive father to myself, mother, and my sister. Not…read moresure how my name has anything to do with this matter other than it shows how petty you are. You also left out that I was offering to leave the bike on Sunday for you to work on it during the week. Your light staff on Sunday? You had a person there for a $25.00 sticker and treated me like I was a bother trying to continue to do business with you. The only person missing from your staff that day was the finance guy. Otherwise, it's always been you, the two older folks, and sometimes the finance guy. You state in your response you had no issue with continuing the business relationship but, are you not the one who handed me the tire and said to go elsewhere? Are you not the same person who told me this had nothing to do with you, yet here you are responding to this situation? Jason X... it's Marshall. Has been for 2 years. Brentwood NH court, 11/2016.

I am sad to write thie review. I've used Derry Cycle for years, repairing things on my kid's Honda…read moredirtbikes. I called ahead to have my kid's Honda Odyssey worked on (the buggy, not the car) - it needs tires and a pull cord for the starter, since it broke off. Easy fixes, they said on the phone. I get there, no one from service is there and the "manager" says they wouldn't work on it anyway, take it to a Honda dealer. Thanks for wasting my time. So dissapointing, since they were so awesome maintaining my kid's dirtbikes for years.

A friend told me about Nault's Powersports since I was was in need to a lawnmower. A check of the…read morewebsite showed several Honda lawnmowers available and even on sale!! Made one call to the shop and spoke with Zach, this kid was fantastic. We set up a time to come and see and pick up the mower, Zach then followed up with a text message to have the warranty and all paperwork done prior to my arrival. I came in the following day and the mower was next to his desk ready to go. In and out in less than 10 minutes. Highly recommend Zach and Nault's.

BE WARY of this business‼ I purchased a brand, New CF Moto 675 and paid cash for it. In less…read morethan 2 weeks it stopped running while I was driving and I had to have it towed to my home. I immediately phoned Naults and began working with Matt in the service department and Jeff one of the top managers. Jeff himself told me they would reimburse me for the tow which never happened.... after 37 day they were able to finally pick up bike from my house & determine that it was due to a factory default in which the clutch plates/discs were broken, due to them originally being assembled incorrectly (therefore, they had to replace the clutch). Matt did the replacement under warranty on behalf of CF Moto . they told me I would have to make my way New Hampshire to retrieve my bike, but due to me being persistent on them delivering my bag back to me it finally delivered. Less than 2 weeks later while driving I find my bike stops working again due to the same exact problem. This time it took them longer to come pick my bike up from my house and on top of that they had my bike for over 6 weeks and we're hesitant to do repairs even though I was under warranty from CF Moto-Matt in the service department was communicative when I initiated, but the main manager, Jeff changed his tune and never returned my calls. it was discovered by Matt in the service department that when the clutch was replaced, the first time it was tightened too much which caused. the cable to constantly pull on the clutch release mechanism. (even when the driver's hand is off the lever)-, this prevents the clutch plates from fully pressing together & spin against each other and slip. even though they did take the bike out for the test drive after fixing it-they should've picked up on the fact that it was too tight. once again, hesitant to deliver my bike back I had to finally a week later make my way from Massachusetts up to New Hampshire to retrieve my bike myself. I happen to run into Jeff by walking by and he told me that nothing was ever wrong with the bike. It was just a simple adjustment with. Obviously, he was unaware that Matt the service technician had informed me of much more detail and I have paperwork to show everything. I've stated so far. I asked Matt about the reimbursement on the original toe and he started to stumble with his words and then I just disregarded anything that came out of his mouth after that because obviously. and a con artist. needless to say, I still have my fully paid for bike, which I only purchased.6 months ago and it's been driven under 1000 miles and is not working order. please be aware of this location and especially this manager because I would really be upset to hear anything like this happened to someone else.

I have been taking my bike to EVO for several years now. A friend of mine in the neighborhood told…read moreme how their prices beat dealership prices, and how you were treated with respect, like you were the most important person on the planet. I needed a 5000k service, and thought I'd check it out. Troy treated my bike like it was his own, that to me was very important. Their 5000k service included everything from soup to nuts. In other words, more than any dealership. When I got the bill, I told Troy, I asked him if that was correct, as it seemed too low,...as I am an honest person and want to pay my fair share, he said that it was...sold...customer for life! Last winter I left my bike with Troy for another 5,000k service, to have the top end rebuilt, and to install a Ginz sissy bar with brackets and to have the brackets and fender supports powdercoated black. Quite a laundry list of things to do. When the bike was finished, it was mid winter, I told Troy that I wanted to ride it home, he said no problem, come and get it when you want to. There was one day in February when the weather was in the 50's. I told Troy that I wanted to come and pick it up, no problem. I thought that I would have to pay for storage at least while the bike was there, Troy said no. I was very pleased with the job that EVO did, and I could tell that Troy was too, as he told me how everyone in the shop enjoyed looking at the bike when it was finished. As a repeat customer, I want to say that I have been impressed with Troy and the quality service he and his staff at EVO Cycles provide in Derry, NH.

Our BMW 850 GS needed some care in the middle of multi month ride…read more The awesome folks at the Evo cycle took care of things for us, at a moments notice, though we all know how long it takes to get an appointment.

Dropped off another dirtbike seat and cover for him to install pretty much unannounced. Bill was…read moreable to install it in short order. Good communication, quality work, reasonable rates always an easy pleasant transaction.

I called Bill and told him about a couch that we had which had a ripped seam on one of the seats…read more He came right over and fixed it on the spot! You can't even notice it was ever ripped. We tried ourselves a few times before that, with no luck. He did a great job at a very fair price! I would recommend his services to anyone.

Very knowledgeable guy. Great machine work, quick turn around time. His method is superior against…read moreany other machine shop. Not to mention I locked my keys in my truck and he assisted me on his time to unlock my truck. 10/10 will be seeing him again.

From the owner: Advanced cylinder head resurfacing at affordable prices with fast turnaround. Flatness is key to…read moreproviding the optimal mating surface for both performance and reliability. Our typical flatness less than .001" over the ENTIRE surface of the cylinder head, end to end. This far exceeded OEM specs and traditional engine machine shops can't touch our tolerances. You want your cylinder head back in days, not weeks. With lapping, you never need to disassemble your head. Leave the valves, springs, plugs, cams & gears in place. Pull the head and bring it in. Trust the experts.