Had my transmission rebuilt in mid December. Ran fine. Recently drove to Sarasota and back…read more Transmission worked great. I definitely recommend this place.

We have personally used them a couple of times and they did a good honest job each timeread more

I had my car towed there to get world on they never looked at my car after more than a whole week…read more So when I called to say I would be have my car towed back to my house they hung up on me so I called back and said did the phone get disconnected he said no I heard you. I said I was would never recommend them!!!!

If I could give them a -10 I would, my guy took his Ford F-150 to them to get the transmission…read morerebuilt over 7 weeks ago, they just started on it last week. They called him yesterday to say the transmission was done and BY THE WAY, did you know that your Catalytic Converters are missing? WTF they were not missing 7 weeks ago when I gave you my truck and $1000 deposit. He hung up phone to make a few calls and calm down and when he called back they would not answer. DO NOT GO HERE, I wish I would have read these reviews before he went. But a friend of his that USED to do business with them YEARS ago gave him a recommendation.

Hey these guys no wat they or doing got my car in one day and got it out the same day very…read moreprofessional

Took for engine install was told it would take 2 weeks, took 3 months now I found out why it took…read moreso long. The wrong engine was put into my car. So now I have to pay someone else to reinstall because they claim it is the right size but I took my car to the dealer and the had a mo par expert figure out why my car would not stay on. Dont take your car there they have no idea what they are doing and Im currently suing for a refund. Wish I didnt pay cash or I could dispute with bank

First of all this place shouldn't even be in business I came Saturday to get a tire cost me $79,…read morebut I'm not going to argue about the price, the tire was flat by 3:00 a.m. the following day so I had to wait to certain stores were open to go and get the tools to remove the tire because the jerk that changed the tire decided to torque them completely down, so I had to spend just as much money as it cost to get the tire to change the tire because I couldn't do it by hand. But don't worry I'll be back to get a refund. And if I can't get a refund I'll be making enough phone calls to get one.

If I could give zero stars, I would. Moe does not treat women well. Didn't finish the job just to…read moreget me to come back and pay more money. Very inappropriately hitting on me.

I was pleased with my experience with kings auto repair. I feel like my concerns were addressed and…read morethe service was high quality and well worth the cost. I recommend this repair shop.

Great Service, I appreciate the customer service and compassion you show the residents in the…read morecommunity.

Hayes still says he's Engine Management. He's not. Maybe he used to be. I've been taking my car to…read morethem for 18 yrs - I have a beautiful 2004 Dodge Stratus. My engine squealed for over 4 yrs. (off and on) He could never find the problem "he says". The last time he said I was losing antifreeze through the reservoir. OK. He ordered the part and installed it. The next day all the antifreeze was running out fast. Upset, I took it back and he had an attitude and gave me the address of another mechanic because I needed and water pump and he doesn't do that type of work. As a trusted mechanic he should have known my pump was bad in the first place. Luckily I found wonder mechanic at Columbia Auto Repair. No my car run smoothly with power. They even repaired an item that Hayes says he did earlier. Doing inspections is all he's good for now.

I waz told a good Inspection would cost $36 and something else would cost $60. I'd no issues to…read moreprevent a good Inspection. However, the owner found a slight issue with the wipers and wax ready to charge me the $60. I pointed out the non issue with the blades and that they were on delay. He reluctantly passed me for the $36. Here's where injury waz added to insult--right before i handed my truck to him to pull n2 one of the bays, i stutter-stepped to grab my bag of weed from the door. My were on my weed az i switched him pozition. He clozed the door and drove n2 a bay. I waited maybe 20 min for him to finish up. When he gave me my vehicle, the weed waz gone. I confronted him immediately because I'd just watched my bag role n2 the bay with him 20min prior. No mistaken "where'd i put my weed???" type $#!t. I watched him sit next to it. But he denied taking it. What waz i to do? I drove away partially . I'da given hiz bogus ass a blunt on GP. I ain't caught up.

I took them a bare 6.0 block to just be bored and honed and hot tanked....I told them I wanted all…read morethe bearings,pistons, rods and crank installed and told him what my budget was ...he agreed and said it would be ready in a week...6 weeks later he said it was ready when I got there he gave me a bare block that looked horrible had surface rust all over it and a box with some cheap bearings and parts...he gave me the wrong crank ...and my cam wouldn't fit...I will never use these people...and he went almost $1000 over...so he didn't do shit and charged me more ..when I asked for a detailed receipt he told me no. ...DO NOT USE THIS PLACE

Absolutely the most TRASH customer service I have ever seen before in my life. They listed a LY6…read more6.0 GM block for sale that was bored .020" over. Said it was hot tanked, cleaned, painted and brush honed. Pictures on their listing looked like a freshly machined and cleaned block. After trying to pay them for a week they finally took my money. I finally found .020' over pistons since they are rare for these blocks. The block showed up 3 weeks later and was absolute garbage. It was absolutely not hot tanked, cleaned and inspected. There is old dirty oil leaking out of the mains, old gasket material hanging off everywhere, and to top it all off it was still a standard bore block! It literally looks like they pulled a motor out of a junk yard, tore it down and lazily pressure washed it, rattle canned it black and sent it off on a dilapidated pallet missing legs. Rusted, corroded cylinder bores, I mean seriously it is horrible. Absolutely nowhere near what the listing stated. The whole thing is just a marketing scam on their ebay page. I should've known better when they wouldn't even let me pay using paypal or ebay. I called and they said if I sent it back they would refund the money. So now that I waited a month for this motor to build, I now have to pay $300 to ship it back to them and wait for them to maybe refund my money (but not the 1/3 of the price it costs to ship it back)! How in God's name is that customer service?!?! I had to call my bank and file a dispute and got the money for the block back but am now told if I still don't pay to ship it back to them that the money will be taken back out of my account. So all in all I will be out $300 for absolutely NOTHING! This company is trash, if they offered me free engines for life I would refuse and pay someone with good customer service double. And throughout the entire process I was nothing but patient and nice while being ignored and given the run around. So I call back to tell them that it is still sitting here and they need to set up shipping to come pick it up. Even offered to pay half of the shipping at their rate since they get discounted rates and it's only $175 for them to ship it and they refused. I asked to speak to the owner and am told no. And to top it all off when I asked how it makes sense to send someone something they didn't even order (wrong product not at all what is described) she tells me that she sent me something better because it's a standard bore! I don't care how you feel about it being better or not, it is absolutely not what was in the product description. I had asked when ordering how much they would charge to bore it to .030" over and it was too much and I didn't really trust them to do it right. So after telling her that I had ordered the 020" over pistons and was going to use them since that's what the bore of the block was supposed to be she said I wouldn't have been able to use them anyways because the block would've still needed to be bored. Why in the world would you need to bore a block that is 4.020" even more to use pistons that are 4.020". you would need to finish hone it to the manufacturer specs of the pistons which some are made to go directly in a 4.020" bore (like the ones i ordered. Product description said it was honed already, but was told that it was in no way ready to be assembled coming from her machine shop. How is that even possible?!!? Literally all i want is to have them come pick it up and take it back and give me my money back but basically they sent me whatever they wanted and I should be happy with it because to them "I sent you something better". NO, YOU SENT ME TRASH! I could've gotten something this crappy out of a local junk yard for $2-300! this cost $899 plus $175 shipping. Stay as far away from this place as possible if you are looking for any type of quality anything. regardless of what they come on here and respond with, they send nothing near what they advertised and will not make it right by simply paying the return freight with their discounted rate. This is not my fault! Attached is pictures of their listing and description and of the part i actually received.