Been using Johnny Rackleys for 20 plus years. They are great and get the job done as promised…read more They move to a new location still on main just a bit further east. Go pay them a visit for your machining needs.

Mr. P is the one who went here, so forgive me for the uneducated "parts speak"!…read more By word of mouth, Mr. P was referred to Johnny Rackley's to mill his heads and block. He walks in and the record scratches. "Who sent you?", a gal bellows from the shop. In a small voice, Mr. P says that he had been referred here for his engine. "So, you've got work for me?", she replies. "Yes?" He notes that the gals are wearing bikinis and daisy dukes. The guys are dressed in normal shop shirts. In case you wondered. He brings his engine and discusses what he'd like done. Once it was determined that he was not a solicitor or with the IRS, his work was accepted. They were quite friendly after that. A great price for the work too...several hundred lower than a quote from another shop. They stayed in good contact with him, and let him know right away when the springs (?) he had ordered had one with an inner coil missing. They were patient as we ordered another set. Pickup was easy, and the cost was right on par with what was quoted. The only thing we weren't happy about was hitting our shiny metal with bead (abrasive bead blasting), so now it's a textured, flat surface. Doesn't everyone want a shiny motor? Overall, we would definitely come here again, and would just be more specific of our expectations at the end. The value is spectacular and the other work performed was top notch.

Worst experience I've had with a shop in a long time…read more I went out of my way to be as transparent and easy to work with as possible. I sent them a detailed message explaining EXACTLY what I wanted done to my Mustang -- full exhaust setup, how I wanted it mounted, clamps, O2 bungs, everything. I literally did their job for them and made it easy. All I asked for was a rough price range before driving OVER AN HOUR to their shop. Not an exact quote. Just a simple "around this much depending on fabrication." Any decent shop can give a ballpark estimate. Instead, they ignored most of my message, barely communicated, wouldn't answer straight, and kept pushing me to drive all the way over there just for them to look at the car for 10 minutes. I called multiple times and it felt like they genuinely did not care about wasting my time. Then they acted like what I was asking was unreasonable and basically said no shop in Arizona would do what I wanted. Funny enough, less than 10 minutes later I found another shop that actually knows how to communicate, gave me a price, and scheduled me immediately. What made it even worse was seeing them joke on Instagram stories about "if you're not a good customer we don't want to work with you." Meanwhile I was being EXTREMELY clear, respectful, transparent, and serious about spending over $1,000 with them. So if THIS is how they treat someone trying their best to be a straightforward customer, imagine how they'll treat everyone else. Communication was trash, customer service was trash, and they lost themselves an easy customer because of their ego.

I highly recommend this shop for exhaust, emissions issues, and any welding work. My experience…read morewith Rosco was phenomenal. He is highly professional, knows exactly what he's doing, and quickly pinpointed the real issue with my exhaust system. I had failed the emissions test with a P0420 code, which usually means the catalytic converter needs replacing. I went to several VVRP-authorized auto shops for quotes, and all of them told me I'd need to leave my car for 2-3 days, with repair estimates ranging from $2,500-$4,500. The problem? My car is only worth about $2,000! Rosco turned out to be a lifesaver. Using his diagnostic tools, he determined it was only a sensor issue. The part cost just $100, and he replaced it in about 5 minutes. After driving 75 miles on the highway, my car passed the emissions test without any problem. It's rare these days to find an honest and ethical mechanic, but Rosco is exactly that. Go here first--you'll get a clear, honest diagnosis and save yourself from breaking your wallet. Moreover , I am still hunting him down to pay for his services with many calls and text messages. He ignored to get paid A truly nice mechanic

We were assisted by Brannon and he provided Excellent service, communication, and was friendly and…read moreaccommodating for repairs for our sons jeep. He took the time to explain things to us and would HIGHLY recommend HMC off road.

The crew over at HMC were awesome! They were able to fit me in for a clock spring repair at half…read morethe price of the local dealership. These guys know their stuff and I highly recommend anybody and the East Valley/Far East Valley, check these guys out for future jeep repairs/modifications.

This company did an amazing job with good communication, quality craftsmanship and care in their…read moreworkmanship, as well as going above and beyond paying attention to the finer details. Don't hesitate to hire this family company to do quality work at a very fair price. Lots of options with different material and fabrication/colors. I got three estimates and they weren't the absolute lowest, but they were very, very competitive and communicated very well and worked tirelessly on a hot day to get the job done in one day. They also did a large larger RV gate in the same exact style and it turned out fantastic!

I can't recommend this contractor enough. Jordan went above and beyond to make sure my structure…read morecame out exactly right. You can tell they genuinely care about their work. If you're looking for someone who takes pride in what they build and won't cut corners, this is the team to call.

My mower of 14 years of faithful service decided not to start one morning. I've always made sure to…read morechange the oil, the air filter, and spark plug on my own. I figured it was a carburetor issue. I emailed one place and got nothing in return. Called Mow Power and the lady told me to bring it down and they would take a look at it. I walked into the store, and just felt like I was in the right place. I was greeted promptly, and the rep asked me for my info, and asked what was going on with the mower, all the while I felt like I was part of the family, a regular customer. He was up front and said it would be about a 2 week wait because they were starting to get backed up (spring time). I told him I understood. 4 days goes by and I get a text with an epic estimate. I agreed and an hour later got another text "Come get your mower! It's fixed!" Went in the same day, paid for the mower, joked around a little with the rep that helped me, as well as the one that took my payment. They had me meet them outside, and started the mower up 2 or 3 times, to make sure that it started. They even offered to load the mower into the trunk for me. This is a 5 star company here! they know how to do the job, and how to treat their customers. if you want a new company you can trust to fix your lawn equipment, go here. you WON'T be sorry!

In this day and age trying to find a business that still respects their customers is difficult but…read morethese guys are the real deal. I had some trouble with the Cub Cadet while buying equipment direct from the manufacture. They were giving me a bit of the run around with a back ordered item but Richard was on top of it and was in constant communication with me - even though technically it wasn't his problem. Any future items that I need for my mower I will be buying from this business. Can't recommend enough!

I have a big red tube that's towed behind a Boat and the…read moreloop that attaches to the ski rope or the tow rope broke and he sewed it back together and repaired it and it's great

Rex is awesome! He did a full interior replacement on our 2005 Tige and we couldn't be happier…read more It's like having a brand new boat. Pricing was very fair. Took a while, but good things come to those who wait. We'll be back to him for sure.

Brought my car in to have the headliner replaced. Unfortunately, the finished job does not look…read moregood. The edges along the plastic piping are torn and frayed. I told them I was not satisfied with the job. They said it turned out that way due to some wires that made it difficult to tuck the fabric under the piping. Not sure why they couldn't have just measured and cut more precisely. Frustrated to have spent $400 and to be stuck with unfinished work.

Great workmanship and service. And fast turnaround. Would go back and would recommendread more

Dropped off 2 mini bikes to get worked on. They had them done quick, affordable and did very good…read morework. Highly recommend SRS Engine shop

These guys are great. They were one of the few places that would work on a champion generator. They…read morealways keep our stuff working great. And do it fairly quick. I've used them for 2 seasons of generator work and have been 100% service. Fair prices and great work. These guys have great customer service. Will bring all my small motor equipment here from now on.