We have a metal/iron work business and sometimes our clients request powder coating. The work they…read moredo is very good, detailed and they have it done in a timely manner. We just had to drop off the item and pick up when complete. Twice they have matched what color the client wanted. So far no complaints and we've been using them almost 1 year now. The cost is in the middle. If item is not too large or a big amount, they will have it ready in a week, and they provide quotes in advance when requested.

Slow, damaged the metal and poor-quality power coat. I took two sheet metal cabinets to get powder…read morecoated. Told me there may be some warpage on the lid but they could do it in three weeks. Three weeks go by, I call and they say it will be another couple of weeks. Stated they had to strip it again because they powder coated the hinge shut. Six weeks from the beginning they call and say it is done. They showed me the now bent up warped and dented cabinets. I asked them if they were proud of the work? They said no. They blamed the sand blaster. Told them the cabinets were useless to me. They said there was no charge. Gee thanks now I'm out two custom metal cabinets from an antique RV. Not only did they bent the metal they also bend the flanges that hold the hinges and several double thickness edges. Then they powder coater over the bent-up metal. Bubbled up dirty powder coating looks like it was coated over sand paper it is so rough. Maybe they can coat a fence post but they should not try sheet metal.

Winter pot hole damaged my BMW 5 series front wheel. Could feel the unbalanced tire vibrate as I…read moredrove. Eurobeatwheels was able to take me in the day I called and professionally straighten the wheel using hydraulic presses and localized heat to safely reshape the alloy rim without compromising it's structural integrity. Took the car up to high speed following (Highway) and vibration is gone! Well done team! -CHRIS

I got a quote from Rob for bent wheel repair starting at $180…read more On March 27, 2025, I dropped off my wheel with Boris, who had reopened the shop. I emailed Rob on Monday, March 30, to let him know I had dropped it off. This was his response: "No problem, thanks for the heads up! It will be ready for pickup by tomorrow. Thanks." When I returned the next day, Rob's coworker rang me up for $300. I told him Rob had quoted me $180. Rob then told his coworker $200, and the price was lowered accordingly. However, I was also pressured to leave an online review. This was my experience dealing with this company, and it will be my last.

Got my coworkers sons KTM 50 frame and swing arm aswell as other pieces done in orange and black,…read moreexcellent quality and fair pricing. I will be bringing more bike frames soon for sure.

From the owner: Local powder coating shop with an eye for details. Message, email or call to set up a drop off…read moreappointment or quote today! Our services include: -chemical stripping -sandblasting -powdercoating -cerakoting -hydrographic dipping -wheel curb rash repair

I had my motorcycle parts powder coated and they were perfectly executed. Love this place and…read moreexcellent price for the work.

Recently brought an older wrought iron glass top table and 4 chairs to have sanded, painted and…read morepowder coated. Frank suggested we go with a cream colored finish and the results were phenomenal. When we picked it up, it looked amazing. From start to finish, it took less than 2 weeks to complete. Pricing was very reasonable. I have a small 2 person aluminum bench that is in very bad shape and I plan to bring it down next week for a similar makeover. I highly recommend this business to anyone who values keeping their older wrought iron patio furniture. It now looks better than the day it was new.

Wow! Amazing work by the guys at RC. Had a set of iron railings repaired and wanted to have them…read moresandblasted and painted. RC Hotcoats took a 20+ year old set of rails and made them look new with an amazing powder coat finish. They do the work the RIGHT way. I would recommended them to anyone looking to have restorative work done. Absolutely thrilled with the finished product.

From the owner: High quality, extreme durability industrial/commercial and custom powder coating with friendly…read morepricing and quick turn around

Rim Resurrection! After my wheel was massacred by a Maryland pothole that was hell-bent on murder,…read moreI brought the poor thing to Rim Renew. Sam looked at it and looked at me gravely, letting me know it was majorly cracked. He told me that they could get it the best they could, but it would never truly look the same. Sam reminded me of a surgeon telling an athlete that they would walk again, but they'd never play in the pros. Sam and I both acknowledged that they don't make these wheels anymore and I told Sam to do what he could to save her life. This was late Monday afternoon when Sam gave me my wheel's prognosis and by mid Tuesday he had fixed her up. I went and met my sure to be still mangled and scarred wheel today. Little did I know that Sam and the rest of the Rim Renew crew are brilliant plastic surgeons. It looks amazing! I gotta say, my wheels already had quite a few dings and blemishes, but as far as the pothole's attempted murder wounds...you can barely tell! Thanks Sam and crew :)

I thought this was a good place to to get tires until I dealt with the older African guy, missed…read moreout on some money because he tried to make me pay full price for a new tire instead of putting on the one that I had never come here bad for business

The best pros I've found in 20 years of looking for a good metal refinisher…read more The finishes in my Victorian house are bronze (door knobs, locks and hinges), and were in terrible condition. Two different metal refinishers attempted to restore them--one did so-so and one was terrible. The guys at Metal Magic brought them back to their original splendor and way exceeded by highest expectations. They understand that certain metals, like bronze, require different polishing processes than brass. They took enormous care regarding other details. For example, instead of just refinishing the visible part of the locks, they disassembled, cleaned and lubricated each lock mechanism which I now expect to work for another 140 years. I pointed out to them that my exterior door-set needed to be refinished every few years due to sun exposure and they suggested applying a clear ceramic coat to that one instead of the usual varnish--which should stand up for many more years. All this, and their prices are quite reasonable.

After years of neglect and sitting in our basement, we took a look at our Arabian brass table that…read morewas inherited from family. Unfortunately, everyone used a harsh chemical brass polish that had worn down the lacquer finish considerably; as well, from pet stains had damaged it through corrosion. We thought there was no chance in saving it. After talking with Dave, I dropped the table off at the antique store and got it back within two weeks, when he had estimated 3-4 weeks. As well, the final price was below the original quote! I appreciate being given an over-estimate. But most importantly, the finished piece was ABSOLUTELY FANTASTIC. I couldn't believe the improvement, from a tarnished, smoke and pet stain damaged piece. Dave is very talented and will save your things like he did ours!