Have used them in the past and although it came out higher than expected, they were transparent,…read morehonest and cordial. Fast forward to this instance where I have a batch of rotors that I needed to be turned down 1mm each side. Call him, describe what I'm needing and ask if he has a rough estimate on price. He asks me to text pictures, I jot down his number and then send him pictures shortly after. Gave him an hr or so and called him back to see if he received the pictures. Doesnt reallt acknowledge it and is pushy to have me bring them in and that he can do it. I'm about 25ish mins away, but he insists that he'll be late at the shop and that it's no problem. I bring in 1 rotor to see if he can still give me an estimate and he suggests he can help me bring in the rest of the rotors, about 10 in total. As we're bringing them in, I ask him again how much he's thinking it's going to be and he mentions $50 each. At this point, it's beyond the threshold in which the supplier was going to reimburse me for so I ask if I can just machine 2 rotors for now and figure out what can be done with the supplier. The next week rolls around and days go where I dont hear anything. I text him and no response for a day or 2. I call later the following week and he gives me a response like the rotors have been done and that he's been waiting on me. I ask him texting is the best method of communication since he originally asked me to text and he said text is good. I ask him if he's been receiving my texts in which he responds with affirmation. I go to pick up the rotors and come to find out that he only did a single rotor in which I ask when the other side would be done and he says in about 1-2 business days. I say that's fine and then mention that I'll leave that single rotor behind and grab the rest. He then mentions that if I in doing just 2 rotors, that the price would be $100 each. At this point, I'm no longer feeling like this is about money and get the impression that he's just a shady crook now trying to take advantage of people. I'm a little shocked at the pricing at this point and ended up just taking all the rotors back and paid him his $100 to machine a single rotor. Ended up having another shop do the for $20 each

Great work and quality customer service from start to finish. Everything you need from a business.read more

The employees were very nice. The owner refused to drill a simple hole on a fly wheel.read more

After an aggravating search for a bolt that would fit an aftermarket motorcycle part, needed to…read morecustomize that SINGLE BOLT HEAD. Found this listing on Yelp, walked in, and The Boss Man immediately machined the bolt to fit my needs. Great, accommodating service...saved me! Thanks again!

Mitchell Bros machine shop is absolutely fantastic. There is no job too small for them. My…read moretelescope tri pod fell over and broke the mount. The metal wasn't your typical material it was more like pot metal. Mitchell bros didn't even flinch! They welded it back together, and its stronger than ever. Oh, and did I say it was a one day turnaround. Staff is very friendly and helpful. It feels like the old days where everything was done on a handshake.

We had some extremely stuck, broken bolts in a clamp for my bike's front fork. The shop was able to…read moreremove these and retap the threads within just a few hours. Everyone we interacted with was very friendly, and the price for the service was very reasonable. Would recommend!

Great and friendly staff. Price is reasonable too. The turn around took 2-3 days. I was amazed by…read moremy son's medal and how it turned out! They are also good with social media communication, my husband would inquire through text messages and emails and they were able to get back to him in a timely manner and answered every question he had.

AMAZING we had the best experience having a black kitchen pot rack turn to beautiful Nickel ! The…read moreservice was very friendly family run gave us in a timely manner I'm already taking off all my hardware in my new house everything Nicke.

I have a turbo downpipe that needed my recirculated dump tube length adjusted and cutting my…read moredownpipe in half to add a 2.5" vband before the bends. I called the shop and spoke to Joey and explained what I needed. He gave me quote over the phone and I decided to stop by. When I arrived I showed him the parts explaining what I wanted to do. Joey said he could get it done by next morning and gave me a final price, which was within quoted price over the phone so I agreed. Joey completed the work as stated and I am overall happy with the work. Will be back when I need more fab and welding done for my projects! Do note that this was labor only and I provided all parts. Pics show before and after.

Where to begin, Our family purchased our first Pop up tent…read moretrailer, a huge step up from our typical camping tent. We were excited to bring it home but noticed we couldn't get it into our driveway. The bumper was to low on the driveway and was getting stuck on the cement. I called around to all the RV stores and for some reason they all recommended ABC Welding in Anaheim. Well here comes ABC Welding to our rescue. Chuck was the nicest guy, very personalable and extremely honest, he told me to replace my hitch to a lower type hitch and that might solve my problem. He could of made a quick dollar off of me but chose not to . I replaced the hitch a week later and it still got stuck on my driveway so he suggested we add caster wheels to the lower bumper to clear the driveway so I brought it back to him and he did an amazing job! A few weeks later I brought back my trailer for a hitch attachment since he did such a great job on my caster wheels. He just didnt do a hitch attachment but a work of art, literally! He changed the spare wheel attachment point directly on to the bumper to accommodate the extra steel to placed to reinforce the bumper. It went from a 30lb. Bumper rating to well over a thousand pound gorrilla rating. This new setup can probably haul another trailer or a boat, that's how strong he built it. Again it's a thing of beauty and structurely superior to other bumper setups I've seen. I can't give enough accilades about this gentlemans skills and business practice. To simply say it, Chuck is Great!

Excellent service! Requested a quote for a few parts that need to be done. Received my quote with…read morein a few hours and the job was done by the next day. Parts fit great. Very good quality and will be back with more jobs.

They made my parts fast and very good quality and within .001 thousandths they do conventional work…read moreas well as cnc milling

Great local cnc and conventional machine shop. Fast turn turn around and precision work.read more

Had to stop using Embee after nearly 20 years…read more The last time I was there, I was quoted $2,500 for a job that I had done for $600 before. They dropped the price to $1,600, saying it was the best they could do because of tariffs and rising cost of business. I believed them and gave them the job. Afterwards, something still felt off, so I went to 3 other shops and was quoted $400-600 for the same thing. Yesterday, I noticed the coating Embee did that last time, is coming off after a couple 2x4's were strapped to the piece. After giving them thousands of dollars in business over the years and more in referrals, they pull this? Very disappointing

The person behind the counter that runs the powder coating was so friendly and so knowledgeable out…read moreof his way to make sure that I knew everything I needed to know and then some I would highly recommend this place. I've gotten several quotes from other places their prices were lower, but the quality was Exceptional.