I had a 6 inch lift kit installed on my RV by WeldTec Designs, and the difference has been night and day. Before the upgrade, I constantly scraped the bottom of my RV trying to get into my side access driveway, even with 12 pieces of 2x4 laid out to ease the angle. On the road, especially when big rigs passed me or on windy days, the RV would sway so much it felt like I had to fight to keep it straight. Every bump or turn meant gripping the wheel tight and bracing for the sway. Driving my RV had become more of a chore than the fun, relaxing experience it was supposed to be. It added stress to what should have been family time. After the lift was installed, I noticed an immediate improvement. On my drive home, it was windy and big rigs passed me just like before, but I barely noticed. It's amazing how used to white knuckle driving I had become. Now, I feel much more stable and in control. Best of all, I cleared my driveway without needing to lay down a single piece of wood. While some people use their lifted rigs for rough off road adventures, I'm more of a beach day and family campsite kind of RV owner. But even for that kind of use, this lift kit has made a huge difference. What used to feel like a stressful chore is now something I actually look forward to again. Shoutout to Patrick, who was awesome through the whole process. He was knowledgeable, helpful, and great to work with. WeldTec Designs exceeded my expectations. read more

WeldTec Designs - Before and after pics - Auto Customization Near Me - El Cajon, California

See all

We watched Jeremy on YouTube for 3 months before taking (JACKIE-the van) to get lifted. Jeremy & Alyssa were a pleasure to work with. Really nice, down to earth people. They answered all the questions & made clear recommendations. The service that we requested was completed in a week tops. We are confident with the quality of work and recommend them to anyone wanting to take on the journey of van living. read more

See all

I bought a 3" cast spindle lift kit for my 2004 Chevy Express. Upon receiving the shipment, both left and right cast spindles had porosity in the casting. The bearing bolts even sunk into the casting when torqued down. This is extremely concerning and very un-safe if the casting broke on the road. Buyer beware! I do not trust WeldTechs quality control to let an obvious problem like this ship out on BOTH spindles. Also, the bearing bolts supplied with the casting were obviously milled down Grade-8 bolts and even still did not fit in the spindle. Generally WeldTec has very low build quality and in my case, unsafe products. After a long back and forth with WeldTech they did eventually refund the spindles. If you choose to purchase from WeldTec, double/triple check everything before installation. If you pay them to install, check your vehicle. I would not use WeldTec products if they were free. read more

See all

I got my 2024 Thor Axis motorhome stock crappy suspension swapped out with a new WeldTec Designs 4" lift adventurer suspension along with a new stiffer steering stabilizer. It is such a great upgrade for the ride and steering stability and also a quieter ride since the interior items don't get bounced around as violently in the cabinets. The motorhome tracks down the highway so much better now and the new alignment is straight as a arrow. These Class A motorhomes are built on a Ford E-series Class C chassis and have a pretty low ride height so the 4" lift is very welcome and helps get over high speed bumps and steep street dips and I don't hit the curbs with the body any longer. I got the suspension in Mid April 2024 and just got back from a two week 4,700 mile trip from San Diego to Nashville and back home and it performed fantastic the whole trip and I had no issues. If you have a Ford Chassis Class C or a Thor Axis or Vegas, I highly recommend WeldTec suspensions to get them up out of the weeds and to enjoy your RV driving experience a lot more. It's not cheap buts it is worth the cost if you have the finances to swing it and hate your current driving experience and ground clearance. I found WeldTec on YouTube and since he was local to me it made perfect since to get the upgrade. I love my Axis MH so much more now and can't wait to take another long road trip in it. read more

See all

First off, Alyssa knows her stuff!! Let me get that out of the way!! This shop is super busy with van and motor home mods going off the charts! Down to business. I ordered a kit for my van in March, was told the wait was substantial. No prob.. They called when it was available and arranged for pickup and bracket welding.. I made several trips into the office to ask Alyssa questions about stuff and she was extremely helpful.. Understand that this is a small business that's got GLOBAL reach demands. If you're on any van forums, you know this.. They will take good care of you, and the value of what you get is worth every penny and worth the wait.. Hi read more

WeldTec Designs - Weldtec doing their thing!! - Auto Customization Near Me - El Cajon, California

I'll start by saying the components are pretty dialed in and after making a bunch of adjustments the ride is amazing, I used there 6 in suspension system, just to be fair I'm a professional builder so I'm very particularly on how my equipment performs. The provided fox shocks that are NOT the proper shocks ( sorry guys) they are made for sprinter Van's and not valved correctly. There a proprietary shock from Weldtec supplier. I ended up using a off the shelf fox 2.0 tes LCD shock and valved it to my weight both front and rear I also changed the front lower mounts for a longer shock. I don't want to say anything bad because WT was easy to work with and supportive. I'm just very particularly. This class c 29 foot drives amazing and would definitely recommend there kits. read more

WeldTec Designs - 29' class C with weldtec suspension and tweaks - Auto Customization Near Me - El Cajon, California

See all

This is an outstanding owner operated small business. Jeremy and Alyssa were a pleasure to deal with answering all my questions and promptly sending me all quotes for service. These guys are excellent at what they do and have your best interest in mind. I will be returning for more service and I look forward to more of their innovations for Chevy Vans. read more

WeldTec Designs - Lift, wheels and tires installed by the guys at Weldtec Designs. - Auto Customization Near Me - El Cajon, California

I had Weldtec install their Baja Grocery Getter complete package on my 2012 Ford E350. I also added bumpers, rails, and a winch. Alyssa was super helpful and very responsive when I had questions. I can't thank her enough. I knew it would come out nice after watching all the YouTube videos of the work that Jeremy and the crew had done. However, I was kind of in shock when I saw the final product. It was so awesome I couldn't believe it was the same van. I was slightly anxious about how it would ride on long trips. Especially what my wife and 2 kids would think. We drove 9 hours home and it did not drive like a "lifted van". It was so smooth and comfortable. I would highly recommend Weldtec Designs . Jeremy has a passion for what he does and the end product shows it! Ron B read more

They'll sell their products with no instructions and install price is shown with the products

OUTSTANDING! I'm really pleased with the work and how much better my motor home handles. I was definitely interested in getting it lifted to avoid scraping the leveling jacks (And losing Snap Pads), but I had no idea on the positive change in the handling. I highly recommend Weldrec Designs. Jeremy and his team help insure I will not lose another Sap Pad by bolting them on. Excellent work! Thank you! read more

After one month of research I decided to be safe and purchase the weldtech kit because I wasn't going to install cheap products in my 15,000 miles V10. I went to other places full of those pick ups and jeep that everyone has and they don't even know how to lift a van. At weldtech they answered all my question straight and with no bullshit, so I paid for the kit online. Following week I drove to San Diego and they installed it. During the process they found some missing TPMS and they replaced it for free, also gave me a military discount and I saved over $200 of alignment and the sensors. read more

See all

I bought a van that had WeldTec suspension that was in the traffic accident and I need to just one side they accommodated me to the best of their abilities and help me save some money Jeremy and his team were very very helpful and took care of me every step of the way be patient as They get very busy but I am very very pleased with my parts very standup guy and took the time out of filming to answer all my questions and not once did I seem or feel rushed class act thanks again bud. read more

Weldtec worked with me to truely tune their complete performance package to fit my specific needs. My E350 rides smoother, looks amazing and tows my travel trailer as well as it did before the lift. Cant wait to do some adventuring in this thing. read more

WeldTec Designs - Before the complete performance package - Auto Customization Near Me - El Cajon, California

See all

Great experience with my Roadtrek! I am super pleased with the 5" lift on my 2012 Chevy 3500 extended Roadtrek (2013) camper van. The kit was shipped to and installed by a local off-road shop (Essentially Off-Road, Murfreesboro TN, also great!) Alyssa and Jeremy answered all my questions and made sure I got the right match for my vehicle. I opted for the progressive leaf springs, and the ride quality has been excellent. I highly recommend this upgrade from Weldtec to Roadtrek owners. If you are familiar with the Chevy Roadtreks, you know they are pretty low to the ground. In fact one of the underside tanks had scraped the road previously. If you own a Chevy or Ford based class B RV, take a good look at Weldtec. Superb customer service, and they will make sure you get what you need. Highly recommended!! read more

alyssa is not knowledgeable about nor does she seem interested in the products they sell and ignores phone calls and emails, if she doesnt know anything maybe she should let someone who actually knows about cars do her job. their stuff is expensive and i dont mind paying but not everyone is a suspension and lift kit expert and it seems like they lose their patience quickly when a customer needs guidance and advice. if im gonna drop 8 grand on stuff that costs them maybe a grand to make they better give me some decent customer service. theyre downright rude and arrogant people, wont get my business read more

I ordered an Ocotillo Cruiser kit for my Ford E-Series. At first I loved it, but I've been through four alignments with two shops and everyone is telling me that the radius arm is improperly sized causing a pull. Cannot fix with alignment cams. Weldtech told me and my alignment shop separately that they do not use jigs or templates to build their kits so there is natural variation. Straight out of Jeremy's mouth to my ears. I am not willing to accept a constant pull in my vehicle due to their inconsistent workmanship. While they were communicative at first on install questions, they have ignored my last calls and emails and are not cooperating to help resolve my issues. I strongly recommend against buying their E-Series lift kits considering how inconsistent they are. I have two friends with the same issue and have since read multiple reviews of the same issue. Do not buy into their fancy YouTube videos and marketing like I did. They do not support their products or respond when you have problems. read more

I highly recommend Weldtec Designs for quality affordable fab work. Jeremy is always great to deal with and an absolute master of his craft. I've had him work on several of my vehicles and he always does an excellent job. Most everyone I've talked to locally speaks highly of his metal-working skills and have nothing but good experiences to share. The few mixed reviews I've seen out there are from people not sure about what they want, or half-assing it when it comes to budget and/or design (or they just enjoy shop-bashing and trolling). Jeremy is great at working with your budget and getting you the most for your money. Weldtec Designs is the place to go if you want to actually FINISH your project! read more

They've done 2 small repair jobs for us. One was an aluminum weld and another was a steel weld. Both were done quick and the repairs were done on the same day I brought them in. read more

I recently purchased a class c motorhome and quickly found that it was too low for driveways and some places I like to camp at. I found Weldtecdesighs on YouTube and became extremely curious. I contacted them and was given so much positive information that I scheduled an appointment to get the kit installed. Everything went smooth and completed on time as promised. Jeremy and I went for a test drive and I was blown away at how well this motorhome handled. No more issues with hitting the Jacks or wishy-washy handling. Great product, great company, great people. Would highly recommend Weldtecdesighs. read more

So I have been carefully doing my research over a year on the few kits available for a Ford 2wd van, spoke with Jeremy many times over the year. Finally took the 4hr drive to see his facility and kit, to put a long story short I ended up getting a rental, leaving my van on a Monday, Thursday comes and I'm in my van WOW!!! I did the 6in kit and amazing!!!! I couldn't be happier with the kit, installation, and drive. I will be back for more work. Weldtec Designs I couldn't be happier thank you Jeremy and everyone at the shop read more

Beware of this guy! The owner, Jeremy, is a liar and a crook! He quoted a job for me at $1,500, and after it was complete he handed me a bill for over $3,200. I understand $200, $500, maybe even $700 more for unforeseen costs, but more than double the original quote!? For a guy that has over 20 years experience you would think he knows how to estimate the price accurately. He lied about his hourly rate, lied about how many hours he spent "grinding," and LIED about having to borrow a trailer that he already had to try and make it sound like I was getting a deal. Horrible business ethics. Steer clear of Weldtec Designs! read more

An absolutely abysmal company. No sense of customer courtesy. Do NOT purchase anything from this company. I have requested a refund($500) over two weeks ago on a product that I no longer needed because it was taking way to long to make, I have yet to receive my refund. Currently in the process of going through my bank to have this issue resolved. Save yourself the headache and find a better company! read more

I have dealt with Jeremy and his crew a few times in the past and have always felt like I was treated fairly with price and time of completion. He not only did some custom work for me but also some repairs on a stock vehicle also. If you need any type of custom fabrication done or just something fixed quickly, this is the place to go. Remember you get what you pay for. read more

Jeremy is a pleasure to work with. It was great to know that he is here locally in San Diego making my van lift easy, convenient, and the best quality. I just got my van back after getting the rocksliders put on the van. It really looks great. He delivers some of the highest quality products available for any of your off-road needs. read more

Jeremy has been super helpful with aiding me in the purchase my 1st van today . I reached out to other business and would never get returned calls or emails . I contacted Jeremy twice and I was talking to him in the matter of a few minutes . Once I get my van in a few weeks. I plan on buying what I need for Weldtec . Thanks again Jeremy for your help ! read more

Great team. Worked on my Ford Econoline van, got the Baja 6 inch lift with the leafs and had it installed. They did a great job, very friendly, and communicated well! Cant wait to work with them more. Thanks!! read more

I purchased a kit from Jeremy in January of 2015, It's now May 17th 2015 and I will be taking them to court to get my money. Jeremy will string you along for as long as you will let him. He is a crook and hides behind his voicemail once he knows your phone number. DO NOT GIVE THIS GUY MONEY_ HE IS A CON ARTIST. read more

I had my van get a 6" lift from Jeremy. I couldn't be happier! The quality is top class and the van looks amazing now. So much more affordable than other companies. I've already taken it to Joshua Tree and Baja and it handled so amazing on the dirt. Highly recommended and will definitely be getting some other parts for the van fabricated by Weldtec. read more

They have done two very nice custom jobs for me. One a very nice roll cage and another a rear bumper. Everything came out flawless and exactly what I wanted. If you need custom fabrication or basic work done this is the go to shop! read more

Purchased their 4 inch lift and Fox shocks/ steering dampner for my E350 van last month. Ridiculous improvement over stock, very happy with the product. I had them do the install too as I was short on time and they got it done at the time it was promised so no complaints. I worked in the offroad fab industry for 5 years and this has been my best experience with a shop to date. read more

I was on the proverbial fence to add 4wd to my 06 E350 for 2 years.Then had a dream ! A E350 has to have "limitations" (right) due to size! Van was then Named "WAR" = WIDE ASS RHINO-So pursued research on a 2wd Lift.I received More phone/text information and Time from Jeremy Then any others called.No return call/email from Agile offroad at all. Answered all my questions and giggled at a few I had.So short story,drove 3 hours from Apple Valley Ca to El Cajon and ran late.He waited patiently. Jeremy again was patient, answered ,texted me progress to the point I also stepped for front and rear bumpers!!! :0 Went back up and road-tested Gurrrrreat.Jermy has kept his word,did a few extras and I believe went the extra mile.! small hiccup, but I know Jeremy is a Man of his word and will rectify ASAP. Could/Can not find any flaws in his fabrication/ Welding skills.I own an automotive repair shop so you know it came back and next AM up in the Air she went,lifted her skirt and Just amazed at his component's/Design. Took it off-road 3 times 1 evening as Sons friends came over and the SMILING faces through the desert washboards had all these young Men Envying my WIDE ASS RHINO.Now the Wife said she has no hesitation driving the van anytime(not soon).I appreciate his integrity when asked for resovoir shocks,Said I did not need them,and have not felt the need.Could have had me for more $$$ but a very practical businessman interested in preserving his Integrity/Business name and future upgrades! Cannot say I will be getting a newer Van any time soon , but when I do back to Weldtech design I go.This Glowing review was not intended to cause Jeremy to blush but I am 1 very Happy Customer.Need to get this guy on the Map with his well rounded Business model,Integrity ans Fantastic skills- Thanks Jeremy so Much for all the support,recommendations-Ive already had 3 std height van owners ask me why.When I explained the Why, 1 sounded like he was going to do his homework.I am saving for a rear ARB or Elock diff and a roof rack and I'm done......Unless Jeremy calls or texts and says loooky here little boy,want some Candy! read more