Jason was a great help, responding to my messages very promptly. They had the best price (from the…read morebay to Modesto) for a new catalytic converter for an older Honda Odyssey. Andrew had the van all set in about half an hour. I also had them weld on a new turndown tip on a muffler I had lying around. Superb experience.

The fastest car repair I've had . I thought I had major car repair to do it was a loose bolt. They…read moreare honest and reasonable.

Stay away from this company specially from Jonathan eme the sales manager. He is rude and not…read morehelpful at all with customers. They claim to ship out orders next day but they dont tell you that half of what they sell its not in stock and only after you pay they tell you they dont got certain stuff and will take weeks or months to ship out. The manager gets butthurt when he gets called out and cancels orders that at no point did I tell him to cancel my order. Stay away from this garbage company.

2016 Audi A4 with IE STAGE I tune. Previous Audi 2003 A4 1.8T B5.5, Stage I unitronic ate the…read moreclutch so I installed a single mass and LOVED IT. Drove it for another 80,000 miles (190,000 total) and sold it. Picked up the 2016 2.0T B8.5 6sp and figured I'd do the same thing. Stage I tune ate the clutch so wanted a single mass like before. This clutch/flywheel is a Radically different design but this ones far easier to install. Getting the splines to line up installing the clutch like a torque converter is a breeze compared to the traditional clutch setups. JHMs piece is super nice. Per the recommendation to change the clutch line to a one piece stainless usp piece, I did (THAT JOB WAS A PITA). Cleaned face of flywheel and pressure plate, torqued pressure plate per their instructions that are here. Installed and off I went enjoying the positive engagement, ease of shifting and seriously easy pedal. Kinda felt too easy to push. I go about the break in process, happy with how its feeling, staying in touch via email as to how they recommend to bed it in. 500 miles comes along I get the okay to give it some beans. It skips at anything past half throttle. Go back to driving Ms Daisy and IMMEDIATELY EMAIL and express my worry. Emails going back and forth trying to figure out whats going on. Meanwhile still driving back and forth to work like I have Ms Daisy in the back seat. Every once in a while I give it a shot and Nope, skips everytime. Then the Emails get ugly, "Installed" "Installed" wrong. I find I'm having to now defend MY competency in installing a clutch. 57yrs old been wrenching since I was 16, have a 70 Nova with a 498 I BUILT and ported the heads (and tested with my flow bench) I BUILT the TH 400 trans, mini tubbed it assembled the narrowed 9" and I'm a Auto Tech for a living. ect ect ECT. However now I'm getting stressed out thinking I got had by JHM But back to,, umm, "I" KNOW how to swap out a clutch for mucks sake. And now I'm just wanting my car back to stock, Im done trying to soop up my daily, and then the emails turn to "store credit" instead of a refund!! Unless I send it back ASAP. The clutch was out THAT night and spent $180 to get it sent back the following day. ASAP?? DONE!! I get a few emails saying my return has been accepted and my "Refund" will be processed in the order it was received. 2 weeks go by and nothing. Send off Email and get a reply back indicating that NOW the owner wants to renig on my refund because it was installed???!!! oh yeah almost forgot. When I pulled it out the weak pedal (the B 5.5s pedal was nice and stiff) got me really curious. So I set up a jig in my press and measured the old factory Luk SAC pressure plate fingers and it was at 640/650 PSI And JHMs pressure plates fingers were also at 640/650 PSI. So someone explain to me EXACTLY how JHMs pressure plate is going to have anymore clamping force than a factory SACs with the Exact same pressure .. Oh jeeze I almost forgot this too. The morning of the night I pulled the clutch. I pulled the IE Stage I tune back out of the car thinking I'd keep trying to bed the clutch in without worrying about it skipping. I had round about 600 miles on it by this point so I figured I'd at least be able to drive it like normal on the factory tune, RIGHT?? I WAS WRONG!! Let me back up a little. After I pulled the tune out and discovered it wouldn't hold THAT is when I Emailed that little tid bit and that's when the "store credit" vs "refund" per fine print was brought up. Unless I pulled it and sent it back NOW. NOW IM STRESSED AS ALL GET OUT THINKING I JUST GOT HAD FOR $2700 UNLESS I BUST MY ARSE AND GET THE CLUTCH OUT AND SENT!!!!!! To which As I said I did get it out and sent, within 16 hours. To Recap; JHMs single mass organic fiber good for 400ftlbs and 90% of any performance mods including a KO4 turbo. Didn't EVEN HOLD THE FACTORY TUNE IN MY 2016 Audi A4 2.0T 6 speed Quattro. And now, I'm being denied (by the owner) the $2700 refund let alone the $180 shipping. I had the clutch in the car 3 days short of a month. It takes a easy week to ship from cali to mi and vise versa. And now I'm having to BEG to 'somehow' recoup MY $2700.00 I spent on a clutch that didn't work as described, for me Like "I'm" the guilty party. Of WHAT?? Trusting JHMs claim that this clutch will do what it DIDN'T??? I just want my car back after being down for going on a month now but the "owners" now on Vacation. Must be nice,. hope my $2700.00 has enabled You to really enjoy life. While Im stuck having to spend $100 a week on fuel in a truck vs the 60 every two weeks the Audi got because I'm being strung along on a refund. I cant get something else to put in the car to get it back on the road because this guy decided to change his mind about giving me my money back after I busted my arse to pull,.send it, and got Emails saying the return is accepted and the refund is in process. So, take all that for wherever it

I went there with a sample of a wrap I'd want on my car which was more of a candy apple red but…read moreHani suggested to go with this Vampire Red. I'm glad I listened to him because look how fancy my car looks now. Everyone thinks it's paint! Every time I bring it out, I get people saluting and giving a thumbs up. It gets a lot of attention. Hani and his team not only did a good job but they took good care of my car too. It was raining that week and they had my car inside like I requested and also plugged in with a battery tender. To anyone on the fence about this. Just get it wrapped and start enjoying your car.

Hani and his team did a fantastic job wrapping my truck. They did the wrap and tint, both look…read morefantastic. Hani also went over all the options with me and made some recommendations against a few things I would have totally regretted. He did all the work very quickly and communicated what was going on every step of the way. I couldn't recommend Auto Factor more, love the work they did and my truck is no longer a fingerprint magnet.

Good experience. Competitive prices. Solid work. Had Swat Customs install an AEV lift kit for a…read moreJeep Gladiator. 30k miles later, no major issues.

Great work and honest. Very helpful taking pictures of the problem explaining what needs to be doneread more

We took a clients car for a rearview camera, and a stereo upgrade couldn't be happier with the Work…read moreand the finished product and the customer was very happy. That was the most important thing. So I thank you guys for the great work on the Porsche 911.

This is in no way related to the actual service, as it was never confirmed scheduled…read more Unfortunately I got ghosted and that's what this review is going to be about. After we messaged and called to confirm the original appointment. It got pushed back due to unforseen circumstances, very much understandable. Another set of messages, and call with a new date and then got ghosted again. Really hope everything is OK. The service requested was for a chassis Harness install on my classic vehicle..... and although the price was just a little higher than the other 2 shops I called, I heard great things about the shop so I wanted to get the work done purely based on the positive reviews and experiences. This may be just an unfortunate set of circumstances, I hope that it all works out.

I had a great experience working with Kevin at Tracy Collision. He was friendly, helpful, and…read moreprofessional throughout the entire process. He worked hard to help get everything processed quickly and went above and beyond to help close out my claim. I really appreciated his communication, effort, and willingness to help. Kevin made what could have been a stressful process much easier. Thank you, Kevin, for all your help!

I took my vehicle in for repair and the team did a fantastic job especially Marshal! He was very…read morecommunicative and kept me in the process all the way through. My expected day was August 11th to get my car back and I had to tweak my schedule a little because I ended up getting it earlier than expected. Other than that he got me OEM parts and the car looked brand new like I just bought it from the dealership again! I highly recommend them over any other body shop. If you want value and the best care for your car bring it here!

I got an estimate for around $900. They ordered a used part for the car and when they finished the…read morework they charged me less than $150. Honest people, I would have paid the full amount and been none the wider! HONEST PEOPLE!!!

5 star personal service (Greg) five star workmanship on our car very happy with all the work and…read morethe personal service. Ron&Dee Holm

I've been using the shop for over 15 years was my goto shop in San Jose since moving to Tracy makes…read moreit easy to run over to the shop for any services very knowledgeable always extremely thorough with any jobs done new old the do it all even had work done on my 1937 Chevy

As you know European cars can be expensive to repair. Do your research. For me, I took James…read moreexpertise and when with it. So far my car is running good. Worked perform on my Audi RS5 serpentine belt replacement and water pump replacement among other few details. Thanks SprintMotorsports

Luis I want to stop by and show me the scratches on my car the blue Lexus es350 sir. I have a appt…read morein Stockton at 12:00 then I can stop by at 1-1:30 if u have time today. Send me your address; Thanks Salome

So first a bit of history. This location was formerly Barreto's Auto Body, which handled a…read moresignificant dent on my 2002 Toyota Tacoma in Forest Green. In Lodi a drunk woman decided to hit my truck in the parking lot and proceed to drive home like nothing happened. Long story short, a cop was in the right place at the right time and followed her to an apartment where she was arrested for DUI and the judge made her pay restitution. Yes, the justice system does work from time to time... Anyway, Barreto's did a great job and since then I found that Dings and Dents Gone has taken over the shop. Although they are new to the location you can tell they know how to run a business and take care of their customers. My 2021 Cement Grey Tacoma was side swiped by some punks on bicycles and I was worried about rust developing since the scratch broke beyond the clear coat. This required painting two door panels along with color matching and blending the new coat with the original. Not an easy task, but one that a professional shop is expected to perform at a very high level. After a short wait period, my truck was completed at a very fair price and with a professional touch. The team here is great from top to bottom and I hope they have continued success. It's great to see a business deal with transparency and have pride in how they treat customers. They provide great service with quality and craftsmanship. I highly recommend Dings and Dents Gone for anybody looking for a fair priced repair on a car in need of some body work.

Got my truck checked out yesterday morning for a suspension issue, and I have to say these are some…read morehonest people! They explained exactly what was wrong and even found another issue that they couldn't repair at their shop, but still took the time to let us know. Huge shoutout to Louie for keeping me updated with videos, being professional, and taking great care of my lady while she brought the truck in since I was at work. That level of communication and customer service goes a long way. Unfortunately, I didn't end up doing business with them this time because the repair needed to be done elsewhere, but they've definitely earned my trust. I'll absolutely be back for other work I have planned in the future. Highly recommend!

AWARENESS: After purchasing my 5th Wheel earlier this year,…read moreI noticed, when attached to my truck, the nose of the 5th Wheel was approximately 7 inches too high from my trucks bed. I had several solutions to correct the issue; the first was to have the 5th Wheels king pin box raised up and the second, have have my trucks hitch rails lowered (flush mounted) to the bed of the truck. These two fixes would lower my trailers cap approximately 6 inches overall. When asking friends of a good place to have my trucks hitch done, Manteca Truck Accessories came up from each friend. NARRATIVE: Before my visit, I called ahead and explained my issue to Louis. He scheduled my appointment and a few days later, I took my truck in. After looking at my trucks hitch mounting, Louis told me they had several ways to drop the hitch. One was mounting an after market rail system which the manufacture offered. The other was to change out the hitch entirely which to me, wasn't an option. While still with Louis, he made numerous phone calls to the manufacture without luck. He also made calls to some of his other business partners who also count help. In fact, those people kept directing Louis back to my hitches manufacture for the answers. After about an hour with no luck on the phone calls, Louis told me he would email the company in hopes of getting a response and sent me home on his promise to find the solution. As I got on the freeway headed back home, I received a call from Louis telling me the manufacture called him back. He Asked about the parts needed. Was advised the company did have the parts but, they had to be ordered. Louis then set me up for a future appointment date but told me, he would call before the date with the cost of the parts and his labor. A fews days before my next appointment, Louis kept his promise and called me back. He gave me the price of the parts with the labor cost and asked if I wanted him to continue the work. I agreed and later dropped my truck off for service. SCENE: Manteca Truck Accessories is located in the city of Manteca on N. Main Street. The major cross streets are; W. Edison Street and W. Louise Ave. EVIDENCE: As you can see by the before and after pictures of my trucks 5th wheel hitch, the work performed was solid, well thought out and clean. From what Louis told me, one of the securing bolts was too hard to reach so, they actually had to drop the frame in order to secure the rails. RECOMMENDATION(S): I had no issues with the work Louis or his guys at Manteca Truck Accessories performed. In fact, I really appreciate the "above and beyond" Louis did finding the answers and keeping me informed about the solution. Well done!